1b3c5cdab4
Updated the device trees to have the PCI nodes be at the same level as the SOC node. This is to make it so that the SOC nodes children address space is just on chip registers and not other bus memory as well. Also, for PCIe nodes added a P2P bridge to handle the virtual P2P bridge that exists in the PHB. Signed-off-by: Kumar Gala <galak@kernel.crashing.org>
337 lines
7.5 KiB
Plaintext
337 lines
7.5 KiB
Plaintext
/*
|
|
* MPC8349E MDS Device Tree Source
|
|
*
|
|
* Copyright 2005, 2006 Freescale Semiconductor Inc.
|
|
*
|
|
* This program is free software; you can redistribute it and/or modify it
|
|
* under the terms of the GNU General Public License as published by the
|
|
* Free Software Foundation; either version 2 of the License, or (at your
|
|
* option) any later version.
|
|
*/
|
|
|
|
/ {
|
|
model = "MPC8349EMDS";
|
|
compatible = "MPC8349EMDS", "MPC834xMDS", "MPC83xxMDS";
|
|
#address-cells = <1>;
|
|
#size-cells = <1>;
|
|
|
|
cpus {
|
|
#address-cells = <1>;
|
|
#size-cells = <0>;
|
|
|
|
PowerPC,8349@0 {
|
|
device_type = "cpu";
|
|
reg = <0>;
|
|
d-cache-line-size = <20>; // 32 bytes
|
|
i-cache-line-size = <20>; // 32 bytes
|
|
d-cache-size = <8000>; // L1, 32K
|
|
i-cache-size = <8000>; // L1, 32K
|
|
timebase-frequency = <0>; // from bootloader
|
|
bus-frequency = <0>; // from bootloader
|
|
clock-frequency = <0>; // from bootloader
|
|
};
|
|
};
|
|
|
|
memory {
|
|
device_type = "memory";
|
|
reg = <00000000 10000000>; // 256MB at 0
|
|
};
|
|
|
|
bcsr@e2400000 {
|
|
device_type = "board-control";
|
|
reg = <e2400000 8000>;
|
|
};
|
|
|
|
soc8349@e0000000 {
|
|
#address-cells = <1>;
|
|
#size-cells = <1>;
|
|
device_type = "soc";
|
|
ranges = <0 e0000000 00100000>;
|
|
reg = <e0000000 00000200>;
|
|
bus-frequency = <0>;
|
|
|
|
wdt@200 {
|
|
device_type = "watchdog";
|
|
compatible = "mpc83xx_wdt";
|
|
reg = <200 100>;
|
|
};
|
|
|
|
i2c@3000 {
|
|
device_type = "i2c";
|
|
compatible = "fsl-i2c";
|
|
reg = <3000 100>;
|
|
interrupts = <e 8>;
|
|
interrupt-parent = < &ipic >;
|
|
dfsrr;
|
|
};
|
|
|
|
i2c@3100 {
|
|
device_type = "i2c";
|
|
compatible = "fsl-i2c";
|
|
reg = <3100 100>;
|
|
interrupts = <f 8>;
|
|
interrupt-parent = < &ipic >;
|
|
dfsrr;
|
|
};
|
|
|
|
spi@7000 {
|
|
device_type = "spi";
|
|
compatible = "mpc83xx_spi";
|
|
reg = <7000 1000>;
|
|
interrupts = <10 8>;
|
|
interrupt-parent = < &ipic >;
|
|
mode = <0>;
|
|
};
|
|
|
|
/* phy type (ULPI or SERIAL) are only types supportted for MPH */
|
|
/* port = 0 or 1 */
|
|
usb@22000 {
|
|
device_type = "usb";
|
|
compatible = "fsl-usb2-mph";
|
|
reg = <22000 1000>;
|
|
#address-cells = <1>;
|
|
#size-cells = <0>;
|
|
interrupt-parent = < &ipic >;
|
|
interrupts = <27 8>;
|
|
phy_type = "ulpi";
|
|
port1;
|
|
};
|
|
/* phy type (ULPI, UTMI, UTMI_WIDE, SERIAL) */
|
|
usb@23000 {
|
|
device_type = "usb";
|
|
compatible = "fsl-usb2-dr";
|
|
reg = <23000 1000>;
|
|
#address-cells = <1>;
|
|
#size-cells = <0>;
|
|
interrupt-parent = < &ipic >;
|
|
interrupts = <26 8>;
|
|
dr_mode = "otg";
|
|
phy_type = "ulpi";
|
|
};
|
|
|
|
mdio@24520 {
|
|
device_type = "mdio";
|
|
compatible = "gianfar";
|
|
reg = <24520 20>;
|
|
#address-cells = <1>;
|
|
#size-cells = <0>;
|
|
phy0: ethernet-phy@0 {
|
|
interrupt-parent = < &ipic >;
|
|
interrupts = <11 8>;
|
|
reg = <0>;
|
|
device_type = "ethernet-phy";
|
|
};
|
|
phy1: ethernet-phy@1 {
|
|
interrupt-parent = < &ipic >;
|
|
interrupts = <12 8>;
|
|
reg = <1>;
|
|
device_type = "ethernet-phy";
|
|
};
|
|
};
|
|
|
|
ethernet@24000 {
|
|
device_type = "network";
|
|
model = "TSEC";
|
|
compatible = "gianfar";
|
|
reg = <24000 1000>;
|
|
/*
|
|
* address is deprecated and will be removed
|
|
* in 2.6.25. Only recent versions of
|
|
* U-Boot support local-mac-address, however.
|
|
*/
|
|
address = [ 00 00 00 00 00 00 ];
|
|
local-mac-address = [ 00 00 00 00 00 00 ];
|
|
interrupts = <20 8 21 8 22 8>;
|
|
interrupt-parent = < &ipic >;
|
|
phy-handle = < &phy0 >;
|
|
};
|
|
|
|
ethernet@25000 {
|
|
#address-cells = <1>;
|
|
#size-cells = <0>;
|
|
device_type = "network";
|
|
model = "TSEC";
|
|
compatible = "gianfar";
|
|
reg = <25000 1000>;
|
|
/*
|
|
* address is deprecated and will be removed
|
|
* in 2.6.25. Only recent versions of
|
|
* U-Boot support local-mac-address, however.
|
|
*/
|
|
address = [ 00 00 00 00 00 00 ];
|
|
local-mac-address = [ 00 00 00 00 00 00 ];
|
|
interrupts = <23 8 24 8 25 8>;
|
|
interrupt-parent = < &ipic >;
|
|
phy-handle = < &phy1 >;
|
|
};
|
|
|
|
serial@4500 {
|
|
device_type = "serial";
|
|
compatible = "ns16550";
|
|
reg = <4500 100>;
|
|
clock-frequency = <0>;
|
|
interrupts = <9 8>;
|
|
interrupt-parent = < &ipic >;
|
|
};
|
|
|
|
serial@4600 {
|
|
device_type = "serial";
|
|
compatible = "ns16550";
|
|
reg = <4600 100>;
|
|
clock-frequency = <0>;
|
|
interrupts = <a 8>;
|
|
interrupt-parent = < &ipic >;
|
|
};
|
|
|
|
/* May need to remove if on a part without crypto engine */
|
|
crypto@30000 {
|
|
device_type = "crypto";
|
|
model = "SEC2";
|
|
compatible = "talitos";
|
|
reg = <30000 10000>;
|
|
interrupts = <b 8>;
|
|
interrupt-parent = < &ipic >;
|
|
num-channels = <4>;
|
|
channel-fifo-len = <18>;
|
|
exec-units-mask = <0000007e>;
|
|
/* desc mask is for rev2.0,
|
|
* we need runtime fixup for >2.0 */
|
|
descriptor-types-mask = <01010ebf>;
|
|
};
|
|
|
|
/* IPIC
|
|
* interrupts cell = <intr #, sense>
|
|
* sense values match linux IORESOURCE_IRQ_* defines:
|
|
* sense == 8: Level, low assertion
|
|
* sense == 2: Edge, high-to-low change
|
|
*/
|
|
ipic: pic@700 {
|
|
interrupt-controller;
|
|
#address-cells = <0>;
|
|
#interrupt-cells = <2>;
|
|
reg = <700 100>;
|
|
device_type = "ipic";
|
|
};
|
|
};
|
|
|
|
pci@e0008500 {
|
|
interrupt-map-mask = <f800 0 0 7>;
|
|
interrupt-map = <
|
|
|
|
/* IDSEL 0x11 */
|
|
8800 0 0 1 &ipic 14 8
|
|
8800 0 0 2 &ipic 15 8
|
|
8800 0 0 3 &ipic 16 8
|
|
8800 0 0 4 &ipic 17 8
|
|
|
|
/* IDSEL 0x12 */
|
|
9000 0 0 1 &ipic 16 8
|
|
9000 0 0 2 &ipic 17 8
|
|
9000 0 0 3 &ipic 14 8
|
|
9000 0 0 4 &ipic 15 8
|
|
|
|
/* IDSEL 0x13 */
|
|
9800 0 0 1 &ipic 17 8
|
|
9800 0 0 2 &ipic 14 8
|
|
9800 0 0 3 &ipic 15 8
|
|
9800 0 0 4 &ipic 16 8
|
|
|
|
/* IDSEL 0x15 */
|
|
a800 0 0 1 &ipic 14 8
|
|
a800 0 0 2 &ipic 15 8
|
|
a800 0 0 3 &ipic 16 8
|
|
a800 0 0 4 &ipic 17 8
|
|
|
|
/* IDSEL 0x16 */
|
|
b000 0 0 1 &ipic 17 8
|
|
b000 0 0 2 &ipic 14 8
|
|
b000 0 0 3 &ipic 15 8
|
|
b000 0 0 4 &ipic 16 8
|
|
|
|
/* IDSEL 0x17 */
|
|
b800 0 0 1 &ipic 16 8
|
|
b800 0 0 2 &ipic 17 8
|
|
b800 0 0 3 &ipic 14 8
|
|
b800 0 0 4 &ipic 15 8
|
|
|
|
/* IDSEL 0x18 */
|
|
c000 0 0 1 &ipic 15 8
|
|
c000 0 0 2 &ipic 16 8
|
|
c000 0 0 3 &ipic 17 8
|
|
c000 0 0 4 &ipic 14 8>;
|
|
interrupt-parent = < &ipic >;
|
|
interrupts = <42 8>;
|
|
bus-range = <0 0>;
|
|
ranges = <02000000 0 90000000 90000000 0 10000000
|
|
42000000 0 80000000 80000000 0 10000000
|
|
01000000 0 00000000 e2000000 0 00100000>;
|
|
clock-frequency = <3f940aa>;
|
|
#interrupt-cells = <1>;
|
|
#size-cells = <2>;
|
|
#address-cells = <3>;
|
|
reg = <e0008500 100>;
|
|
compatible = "fsl,mpc8349-pci";
|
|
device_type = "pci";
|
|
};
|
|
|
|
pci@e0008600 {
|
|
interrupt-map-mask = <f800 0 0 7>;
|
|
interrupt-map = <
|
|
|
|
/* IDSEL 0x11 */
|
|
8800 0 0 1 &ipic 14 8
|
|
8800 0 0 2 &ipic 15 8
|
|
8800 0 0 3 &ipic 16 8
|
|
8800 0 0 4 &ipic 17 8
|
|
|
|
/* IDSEL 0x12 */
|
|
9000 0 0 1 &ipic 16 8
|
|
9000 0 0 2 &ipic 17 8
|
|
9000 0 0 3 &ipic 14 8
|
|
9000 0 0 4 &ipic 15 8
|
|
|
|
/* IDSEL 0x13 */
|
|
9800 0 0 1 &ipic 17 8
|
|
9800 0 0 2 &ipic 14 8
|
|
9800 0 0 3 &ipic 15 8
|
|
9800 0 0 4 &ipic 16 8
|
|
|
|
/* IDSEL 0x15 */
|
|
a800 0 0 1 &ipic 14 8
|
|
a800 0 0 2 &ipic 15 8
|
|
a800 0 0 3 &ipic 16 8
|
|
a800 0 0 4 &ipic 17 8
|
|
|
|
/* IDSEL 0x16 */
|
|
b000 0 0 1 &ipic 17 8
|
|
b000 0 0 2 &ipic 14 8
|
|
b000 0 0 3 &ipic 15 8
|
|
b000 0 0 4 &ipic 16 8
|
|
|
|
/* IDSEL 0x17 */
|
|
b800 0 0 1 &ipic 16 8
|
|
b800 0 0 2 &ipic 17 8
|
|
b800 0 0 3 &ipic 14 8
|
|
b800 0 0 4 &ipic 15 8
|
|
|
|
/* IDSEL 0x18 */
|
|
c000 0 0 1 &ipic 15 8
|
|
c000 0 0 2 &ipic 16 8
|
|
c000 0 0 3 &ipic 17 8
|
|
c000 0 0 4 &ipic 14 8>;
|
|
interrupt-parent = < &ipic >;
|
|
interrupts = <42 8>;
|
|
bus-range = <0 0>;
|
|
ranges = <02000000 0 b0000000 b0000000 0 10000000
|
|
42000000 0 a0000000 a0000000 0 10000000
|
|
01000000 0 00000000 e2100000 0 00100000>;
|
|
clock-frequency = <3f940aa>;
|
|
#interrupt-cells = <1>;
|
|
#size-cells = <2>;
|
|
#address-cells = <3>;
|
|
reg = <e0008600 100>;
|
|
compatible = "fsl,mpc8349-pci";
|
|
device_type = "pci";
|
|
};
|
|
};
|