Saravanan Dhanabal bc0f03ea57 wl1271: Fix msleep() delay while waiting for completion ... After last transmission, the device goes to sleep earlier than the configured dynamic power save timeout. If timeout is set to 400ms, device enters into sleep mode at around 330ms since from last TX. This patch removes the msleep(1), which causes the delay after ELP wakeup. Replaced with udelay(10), the variation is around 7-10ms. Signed-off-by: Saravanan Dhanabal <ext-saravanan.dhanabal@nokia.com> Reviewed-by: Juuso Oikarinen <juuso.oikarinen@nokia.com> Signed-off-by: Luciano Coelho <luciano.coelho@nokia.com> Signed-off-by: John W. Linville <linville@tuxdriver.com>		2010-03-31 14:39:16 -04:00
..
Kconfig	wl1271: Changed wl1271_sdio to be selectable only on ARM	2010-03-10 17:44:43 -05:00
Makefile	wl1271: Initial SDIO implementation	2010-03-09 15:02:59 -05:00
wl12xx_80211.h
wl1251_acx.c
wl1251_acx.h
wl1251_boot.c	wl1251: reduce eeprom read wait time	2010-03-15 15:32:04 -04:00
wl1251_boot.h
wl1251_cmd.c	wl1251: use mac80211 provided channel parameters in scanning	2010-01-12 13:51:26 -05:00
wl1251_cmd.h	wl1251: use mac80211 provided channel parameters in scanning	2010-01-12 13:51:26 -05:00
wl1251_debugfs.c
wl1251_debugfs.h
wl1251_event.c
wl1251_event.h
wl1251_init.c
wl1251_init.h
wl1251_io.c
wl1251_io.h	wl1251: fix ELP_CTRL register accesses when using SDIO	2010-03-15 15:32:03 -04:00
wl1251_main.c	wl1251: fix ELP_CTRL register accesses when using SDIO	2010-03-15 15:32:03 -04:00
wl1251_ps.c	wl1251: fix ELP_CTRL register accesses when using SDIO	2010-03-15 15:32:03 -04:00
wl1251_ps.h
wl1251_reg.h
wl1251_rx.c
wl1251_rx.h
wl1251_sdio.c	wl1251: fix ELP_CTRL register accesses when using SDIO	2010-03-15 15:32:03 -04:00
wl1251_spi.c
wl1251_spi.h
wl1251_tx.c
wl1251_tx.h
wl1251.h	wl1251: fix ELP_CTRL register accesses when using SDIO	2010-03-15 15:32:03 -04:00
wl1271_acx.c	wl1271: Enable hardware keep alive messages	2010-03-31 14:39:16 -04:00
wl1271_acx.h	wl1271: Enable hardware keep alive messages	2010-03-31 14:39:16 -04:00
wl1271_boot.c	wl1271: wait for disconnect command complete event	2010-03-31 14:39:14 -04:00
wl1271_boot.h	wl1271: Configure clock-request drive mode to open-drain	2010-03-31 14:39:12 -04:00
wl1271_cmd.c	wl1271: Fix msleep() delay while waiting for completion	2010-03-31 14:39:16 -04:00
wl1271_cmd.h	wl1271: Add keep-alive frame template support	2010-03-31 14:39:16 -04:00
wl1271_conf.h	wl1271: Enable hardware keep alive messages	2010-03-31 14:39:16 -04:00
wl1271_debugfs.c	wl1271: Cleaned up wlan power on/off functions	2010-03-23 16:50:18 -04:00
wl1271_debugfs.h
wl1271_event.c	wl1271: Disconnect if PSM entry fails	2010-03-31 14:39:15 -04:00
wl1271_event.h	wl1271: Fix event acknowledging functionality	2009-12-28 16:31:34 -05:00
wl1271_init.c	wl1271: Enable hardware keep alive messages	2010-03-31 14:39:16 -04:00
wl1271_init.h	wl1271: add most of the normal initialization commands to PLT mode	2010-02-19 15:52:44 -05:00
wl1271_io.c	wl1271: Removed wl1271_spi.h and made some functions static	2010-03-09 15:02:58 -05:00
wl1271_io.h	wl1271: Changed platform_device to be dynamically allocated	2010-03-23 16:50:25 -04:00
wl1271_main.c	wl1271: Enable hardware keep alive messages	2010-03-31 14:39:16 -04:00
wl1271_ps.c	wl1271: Removed wl1271_spi.h and made some functions static	2010-03-09 15:02:58 -05:00
wl1271_ps.h	wl1271: Fix PSM entry	2010-02-19 15:52:42 -05:00
wl1271_reg.h	wl1271: remove unused flags	2010-01-14 18:16:54 -05:00
wl1271_rx.c	wl1271: remove deprecated usage of RX status noise	2010-03-31 14:39:14 -04:00
wl1271_rx.h	wl1271: Clean up RX rate reporting	2010-03-31 14:39:11 -04:00
wl1271_sdio.c	wl1271: Warnings caused by wrong format specifiers fixed	2010-03-31 14:39:13 -04:00
wl1271_spi.c	wl1271: Update busyword checking mechanism	2010-03-31 14:39:13 -04:00
wl1271_testmode.c	wl1271: Removed wl1271_spi.h and made some functions static	2010-03-09 15:02:58 -05:00
wl1271_testmode.h	wl1271: add testmode support	2010-02-19 15:52:47 -05:00
wl1271_tx.c	wl1271: Fix memory leak in firmware crash scenario	2010-03-31 14:39:15 -04:00
wl1271_tx.h	wl1271: Add TX rate reporting	2010-03-31 14:39:11 -04:00
wl1271.h	wl1271: Update beacon interval properly for ad-hoc	2010-03-31 14:39:15 -04:00