linux-kernel-test/drivers/mtd/nand/orion_nand.c
Paulius Zaleckas a88a2b8864 mtd: fix Orion NAND driver compilation with ARM OABI
We must tell GCC to use even register for variable passed to ldrd
instruction.  Without this patch GCC 4.2.1 puts this variable to r2/r3 on
EABI and r3/r4 on OABI, so force it to r2/r3.  This does not change
anything when EABI and OABI compilation works OK.

Without this patch and with OABI I get:

    CC      drivers/mtd/nand/orion_nand.o
  /tmp/ccMkwOCs.s: Assembler messages:
  /tmp/ccMkwOCs.s:63: Error: first destination register must be even -- `ldrd r3,[ip]'
  make[5]: *** [drivers/mtd/nand/orion_nand.o] Error 1

Signed-off-by: Paulius Zaleckas <paulius.zaleckas@gmail.com>
Acked-by: Nicolas Pitre <nico@fluxnic.net>
Acked-by: Artem Bityutskiy <dedekind1@gmail.com>
Cc: David Woodhouse <dwmw2@infradead.org>
Cc: Jamie Lokier <jamie@shareable.org>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2010-04-24 11:31:24 -07:00

204 lines
4.3 KiB
C

/*
* drivers/mtd/nand/orion_nand.c
*
* NAND support for Marvell Orion SoC platforms
*
* Tzachi Perelstein <tzachi@marvell.com>
*
* This file is licensed under the terms of the GNU General Public
* License version 2. This program is licensed "as is" without any
* warranty of any kind, whether express or implied.
*/
#include <linux/slab.h>
#include <linux/module.h>
#include <linux/platform_device.h>
#include <linux/mtd/mtd.h>
#include <linux/mtd/nand.h>
#include <linux/mtd/partitions.h>
#include <asm/io.h>
#include <asm/sizes.h>
#include <mach/hardware.h>
#include <plat/orion_nand.h>
#ifdef CONFIG_MTD_CMDLINE_PARTS
static const char *part_probes[] = { "cmdlinepart", NULL };
#endif
static void orion_nand_cmd_ctrl(struct mtd_info *mtd, int cmd, unsigned int ctrl)
{
struct nand_chip *nc = mtd->priv;
struct orion_nand_data *board = nc->priv;
u32 offs;
if (cmd == NAND_CMD_NONE)
return;
if (ctrl & NAND_CLE)
offs = (1 << board->cle);
else if (ctrl & NAND_ALE)
offs = (1 << board->ale);
else
return;
if (nc->options & NAND_BUSWIDTH_16)
offs <<= 1;
writeb(cmd, nc->IO_ADDR_W + offs);
}
static void orion_nand_read_buf(struct mtd_info *mtd, uint8_t *buf, int len)
{
struct nand_chip *chip = mtd->priv;
void __iomem *io_base = chip->IO_ADDR_R;
uint64_t *buf64;
int i = 0;
while (len && (unsigned long)buf & 7) {
*buf++ = readb(io_base);
len--;
}
buf64 = (uint64_t *)buf;
while (i < len/8) {
/*
* Since GCC has no proper constraint (PR 43518)
* force x variable to r2/r3 registers as ldrd instruction
* requires first register to be even.
*/
register uint64_t x asm ("r2");
asm volatile ("ldrd\t%0, [%1]" : "=&r" (x) : "r" (io_base));
buf64[i++] = x;
}
i *= 8;
while (i < len)
buf[i++] = readb(io_base);
}
static int __init orion_nand_probe(struct platform_device *pdev)
{
struct mtd_info *mtd;
struct nand_chip *nc;
struct orion_nand_data *board;
void __iomem *io_base;
int ret = 0;
#ifdef CONFIG_MTD_PARTITIONS
struct mtd_partition *partitions = NULL;
int num_part = 0;
#endif
nc = kzalloc(sizeof(struct nand_chip) + sizeof(struct mtd_info), GFP_KERNEL);
if (!nc) {
printk(KERN_ERR "orion_nand: failed to allocate device structure.\n");
ret = -ENOMEM;
goto no_res;
}
mtd = (struct mtd_info *)(nc + 1);
io_base = ioremap(pdev->resource[0].start,
pdev->resource[0].end - pdev->resource[0].start + 1);
if (!io_base) {
printk(KERN_ERR "orion_nand: ioremap failed\n");
ret = -EIO;
goto no_res;
}
board = pdev->dev.platform_data;
mtd->priv = nc;
mtd->owner = THIS_MODULE;
nc->priv = board;
nc->IO_ADDR_R = nc->IO_ADDR_W = io_base;
nc->cmd_ctrl = orion_nand_cmd_ctrl;
nc->read_buf = orion_nand_read_buf;
nc->ecc.mode = NAND_ECC_SOFT;
if (board->chip_delay)
nc->chip_delay = board->chip_delay;
if (board->width == 16)
nc->options |= NAND_BUSWIDTH_16;
platform_set_drvdata(pdev, mtd);
if (nand_scan(mtd, 1)) {
ret = -ENXIO;
goto no_dev;
}
#ifdef CONFIG_MTD_PARTITIONS
#ifdef CONFIG_MTD_CMDLINE_PARTS
mtd->name = "orion_nand";
num_part = parse_mtd_partitions(mtd, part_probes, &partitions, 0);
#endif
/* If cmdline partitions have been passed, let them be used */
if (num_part <= 0) {
num_part = board->nr_parts;
partitions = board->parts;
}
if (partitions && num_part > 0)
ret = add_mtd_partitions(mtd, partitions, num_part);
else
ret = add_mtd_device(mtd);
#else
ret = add_mtd_device(mtd);
#endif
if (ret) {
nand_release(mtd);
goto no_dev;
}
return 0;
no_dev:
platform_set_drvdata(pdev, NULL);
iounmap(io_base);
no_res:
kfree(nc);
return ret;
}
static int __devexit orion_nand_remove(struct platform_device *pdev)
{
struct mtd_info *mtd = platform_get_drvdata(pdev);
struct nand_chip *nc = mtd->priv;
nand_release(mtd);
iounmap(nc->IO_ADDR_W);
kfree(nc);
return 0;
}
static struct platform_driver orion_nand_driver = {
.remove = __devexit_p(orion_nand_remove),
.driver = {
.name = "orion_nand",
.owner = THIS_MODULE,
},
};
static int __init orion_nand_init(void)
{
return platform_driver_probe(&orion_nand_driver, orion_nand_probe);
}
static void __exit orion_nand_exit(void)
{
platform_driver_unregister(&orion_nand_driver);
}
module_init(orion_nand_init);
module_exit(orion_nand_exit);
MODULE_LICENSE("GPL");
MODULE_AUTHOR("Tzachi Perelstein");
MODULE_DESCRIPTION("NAND glue for Orion platforms");
MODULE_ALIAS("platform:orion_nand");