lk/linux-kernel-test
1
0
Fork 0
Code Issues Pull Requests Releases Wiki Activity
4a19faee63
linux-kernel-test/sound/pci/hda/patch_realtek.c
Takashi Iwai 71fe7b82db [ALSA] Fix ALC880 capture problems 
HDA Codec driver
Fixed the capture on some ALC880 devices.
The node 0x07 is sometimes invalid as an ADC.  Also, the intialization
of ADC nodes are fixed on some models.

Signed-off-by: Takashi Iwai <tiwai@suse.de>
2005-05-29 10:14:56 +02:00

1940 lines
66 KiB
C
Raw Blame History

/*
* Universal Interface for Intel High Definition Audio Codec
*
* HD audio interface patch for ALC 260/880/882 codecs
*
* Copyright (c) 2004 PeiSen Hou <pshou@realtek.com.tw>
* Takashi Iwai <tiwai@suse.de>
*
* This driver is free software; you can redistribute it and/or modify
* it under the terms of the GNU General Public License as published by
* the Free Software Foundation; either version 2 of the License, or
* (at your option) any later version.
*
* This driver is distributed in the hope that it will be useful,
* but WITHOUT ANY WARRANTY; without even the implied warranty of
* MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
* GNU General Public License for more details.
*
* You should have received a copy of the GNU General Public License
* along with this program; if not, write to the Free Software
* Foundation, Inc., 59 Temple Place, Suite 330, Boston, MA 02111-1307 USA
*/
#include <sound/driver.h>
#include <linux/init.h>
#include <linux/delay.h>
#include <linux/slab.h>
#include <linux/pci.h>
#include <sound/core.h>
#include "hda_codec.h"
#include "hda_local.h"
/* ALC880 board config type */
enum {
ALC880_MINIMAL,
ALC880_3ST,
ALC880_3ST_DIG,
ALC880_5ST,
ALC880_5ST_DIG,
ALC880_W810,
ALC880_Z71V,
ALC880_TEST,
};
struct alc_spec {
/* codec parameterization */
unsigned int front_panel: 1;
snd_kcontrol_new_t* mixers[2];
unsigned int num_mixers;
struct hda_verb *init_verbs;
char* stream_name_analog;
struct hda_pcm_stream *stream_analog_playback;
struct hda_pcm_stream *stream_analog_capture;
char* stream_name_digital;
struct hda_pcm_stream *stream_digital_playback;
struct hda_pcm_stream *stream_digital_capture;
/* playback */
struct hda_multi_out multiout;
/* capture */
unsigned int num_adc_nids;
hda_nid_t *adc_nids;
hda_nid_t dig_in_nid;
/* capture source */
const struct hda_input_mux *input_mux;
unsigned int cur_mux[3];
/* channel model */
const struct alc_channel_mode *channel_mode;
int num_channel_mode;
/* PCM information */
struct hda_pcm pcm_rec[2];
};
/* DAC/ADC assignment */
static hda_nid_t alc880_dac_nids[4] = {
/* front, rear, clfe, rear_surr */
0x02, 0x05, 0x04, 0x03
};
static hda_nid_t alc880_w810_dac_nids[3] = {
/* front, rear/surround, clfe */
0x02, 0x03, 0x04
};
static hda_nid_t alc880_z71v_dac_nids[1] = {
/* front only? */
0x02
};
#if 0
/* The datasheet says the node 0x07 is connected from inputs,
* but it shows zero connection in the real implementation.
*/
static hda_nid_t alc880_adc_nids[3] = {
/* ADC0-2 */
0x07, 0x08, 0x09,
};
#else
static hda_nid_t alc880_adc_nids[2] = {
/* ADC1-2 */
0x08, 0x09,
};
#endif
#define ALC880_DIGOUT_NID 0x06
#define ALC880_DIGIN_NID 0x0a
static hda_nid_t alc260_dac_nids[1] = {
/* front */
0x02,
};
static hda_nid_t alc260_adc_nids[2] = {
/* ADC0-1 */
0x04, 0x05,
};
#define ALC260_DIGOUT_NID 0x03
#define ALC260_DIGIN_NID 0x06
static struct hda_input_mux alc880_capture_source = {
.num_items = 4,
.items = {
{ "Mic", 0x0 },
{ "Front Mic", 0x3 },
{ "Line", 0x2 },
{ "CD", 0x4 },
},
};
static struct hda_input_mux alc260_capture_source = {
.num_items = 4,
.items = {
{ "Mic", 0x0 },
{ "Front Mic", 0x1 },
{ "Line", 0x2 },
{ "CD", 0x4 },
},
};
/*
* input MUX handling
*/
static int alc_mux_enum_info(snd_kcontrol_t *kcontrol, snd_ctl_elem_info_t *uinfo)
{
struct hda_codec *codec = snd_kcontrol_chip(kcontrol);
struct alc_spec *spec = codec->spec;
return snd_hda_input_mux_info(spec->input_mux, uinfo);
}
static int alc_mux_enum_get(snd_kcontrol_t *kcontrol, snd_ctl_elem_value_t *ucontrol)
{
struct hda_codec *codec = snd_kcontrol_chip(kcontrol);
struct alc_spec *spec = codec->spec;
unsigned int adc_idx = snd_ctl_get_ioffidx(kcontrol, &ucontrol->id);
ucontrol->value.enumerated.item[0] = spec->cur_mux[adc_idx];
return 0;
}
static int alc_mux_enum_put(snd_kcontrol_t *kcontrol, snd_ctl_elem_value_t *ucontrol)
{
struct hda_codec *codec = snd_kcontrol_chip(kcontrol);
struct alc_spec *spec = codec->spec;
unsigned int adc_idx = snd_ctl_get_ioffidx(kcontrol, &ucontrol->id);
return snd_hda_input_mux_put(codec, spec->input_mux, ucontrol,
spec->adc_nids[adc_idx], &spec->cur_mux[adc_idx]);
}
/*
* channel mode setting
*/
struct alc_channel_mode {
int channels;
const struct hda_verb *sequence;
};
/*
* channel source setting (2/6 channel selection for 3-stack)
*/
/*
* set the path ways for 2 channel output
* need to set the codec line out and mic 1 pin widgets to inputs
*/
static struct hda_verb alc880_threestack_ch2_init[] = {
/* set pin widget 1Ah (line in) for input */
{ 0x1a, AC_VERB_SET_PIN_WIDGET_CONTROL, 0x20 },
/* set pin widget 18h (mic1) for input, for mic also enable the vref */
{ 0x18, AC_VERB_SET_PIN_WIDGET_CONTROL, 0x24 },
/* mute the output for Line In PW */
{ 0x1a, AC_VERB_SET_AMP_GAIN_MUTE, 0xb080 },
/* mute for Mic1 PW */
{ 0x18, AC_VERB_SET_AMP_GAIN_MUTE, 0xb080 },
{ } /* end */
};
/*
* 6ch mode
* need to set the codec line out and mic 1 pin widgets to outputs
*/
static struct hda_verb alc880_threestack_ch6_init[] = {
/* set pin widget 1Ah (line in) for output */
{ 0x1a, AC_VERB_SET_PIN_WIDGET_CONTROL, 0x40 },
/* set pin widget 18h (mic1) for output */
{ 0x18, AC_VERB_SET_PIN_WIDGET_CONTROL, 0x40 },
/* unmute the output for Line In PW */
{ 0x1a, AC_VERB_SET_AMP_GAIN_MUTE, 0xb000 },
/* unmute for Mic1 PW */
{ 0x18, AC_VERB_SET_AMP_GAIN_MUTE, 0xb000 },
/* for rear channel output using Line In 1
* set select widget connection (nid = 0x12) - to summer node
* for rear NID = 0x0f...offset 3 in connection list
*/
{ 0x12, AC_VERB_SET_CONNECT_SEL, 0x3 },
/* for Mic1 - retask for center/lfe */
/* set select widget connection (nid = 0x10) - to summer node for
* front CLFE NID = 0x0e...offset 2 in connection list
*/
{ 0x10, AC_VERB_SET_CONNECT_SEL, 0x2 },
{ } /* end */
};
static struct alc_channel_mode alc880_threestack_modes[2] = {
{ 2, alc880_threestack_ch2_init },
{ 6, alc880_threestack_ch6_init },
};
/*
* channel source setting (6/8 channel selection for 5-stack)
*/
/* set the path ways for 6 channel output
* need to set the codec line out and mic 1 pin widgets to inputs
*/
static struct hda_verb alc880_fivestack_ch6_init[] = {
/* set pin widget 1Ah (line in) for input */
{ 0x1a, AC_VERB_SET_PIN_WIDGET_CONTROL, 0x20 },
/* mute the output for Line In PW */
{ 0x1a, AC_VERB_SET_AMP_GAIN_MUTE, 0xb080 },
{ } /* end */
};
/* need to set the codec line out and mic 1 pin widgets to outputs */
static struct hda_verb alc880_fivestack_ch8_init[] = {
/* set pin widget 1Ah (line in) for output */
{ 0x1a, AC_VERB_SET_PIN_WIDGET_CONTROL, 0x40 },
/* unmute the output for Line In PW */
{ 0x1a, AC_VERB_SET_AMP_GAIN_MUTE, 0xb000 },
/* output for surround channel output using Line In 1 */
/* set select widget connection (nid = 0x12) - to summer node
* for surr_rear NID = 0x0d...offset 1 in connection list
*/
{ 0x12, AC_VERB_SET_CONNECT_SEL, 0x1 },
{ } /* end */
};
static struct alc_channel_mode alc880_fivestack_modes[2] = {
{ 6, alc880_fivestack_ch6_init },
{ 8, alc880_fivestack_ch8_init },
};
/*
* channel source setting for W810 system
*
* W810 has rear IO for:
* Front (DAC 02)
* Surround (DAC 03)
* Center/LFE (DAC 04)
* Digital out (06)
*
* The system also has a pair of internal speakers, and a headphone jack.
* These are both connected to Line2 on the codec, hence to DAC 02.
*
* There is a variable resistor to control the speaker or headphone
* volume. This is a hardware-only device without a software API.
*
* Plugging headphones in will disable the internal speakers. This is
* implemented in hardware, not via the driver using jack sense. In
* a similar fashion, plugging into the rear socket marked "front" will
* disable both the speakers and headphones.
*
* For input, there's a microphone jack, and an "audio in" jack.
* These may not do anything useful with this driver yet, because I
* haven't setup any initialization verbs for these yet...
*/
static struct alc_channel_mode alc880_w810_modes[1] = {
{ 6, NULL }
};
static struct alc_channel_mode alc880_z71v_modes[1] = {
{ 2, NULL }
};
/*
*/
static int alc880_ch_mode_info(snd_kcontrol_t *kcontrol, snd_ctl_elem_info_t *uinfo)
{
struct hda_codec *codec = snd_kcontrol_chip(kcontrol);
struct alc_spec *spec = codec->spec;
int items = kcontrol->private_value ? (int)kcontrol->private_value : 2;
snd_assert(spec->channel_mode, return -ENXIO);
uinfo->type = SNDRV_CTL_ELEM_TYPE_ENUMERATED;
uinfo->count = 1;
uinfo->value.enumerated.items = items;
if (uinfo->value.enumerated.item >= items)
uinfo->value.enumerated.item = items - 1;
sprintf(uinfo->value.enumerated.name, "%dch",
spec->channel_mode[uinfo->value.enumerated.item].channels);
return 0;
}
static int alc880_ch_mode_get(snd_kcontrol_t *kcontrol, snd_ctl_elem_value_t *ucontrol)
{
struct hda_codec *codec = snd_kcontrol_chip(kcontrol);
struct alc_spec *spec = codec->spec;
int items = kcontrol->private_value ? (int)kcontrol->private_value : 2;
int i;
snd_assert(spec->channel_mode, return -ENXIO);
for (i = 0; i < items; i++) {
if (spec->multiout.max_channels == spec->channel_mode[i].channels) {
ucontrol->value.enumerated.item[0] = i;
break;
}
}
return 0;
}
static int alc880_ch_mode_put(snd_kcontrol_t *kcontrol, snd_ctl_elem_value_t *ucontrol)
{
struct hda_codec *codec = snd_kcontrol_chip(kcontrol);
struct alc_spec *spec = codec->spec;
int mode;
snd_assert(spec->channel_mode, return -ENXIO);
mode = ucontrol->value.enumerated.item[0] ? 1 : 0;
if (spec->multiout.max_channels == spec->channel_mode[mode].channels &&
! codec->in_resume)
return 0;
/* change the current channel setting */
spec->multiout.max_channels = spec->channel_mode[mode].channels;
if (spec->channel_mode[mode].sequence)
snd_hda_sequence_write(codec, spec->channel_mode[mode].sequence);
return 1;
}
/*
*/
/* 3-stack mode
* Pin assignment: Front=0x14, Line-In/Rear=0x1a, Mic/CLFE=0x18, F-Mic=0x1b
* HP=0x19
*/
static snd_kcontrol_new_t alc880_base_mixer[] = {
HDA_CODEC_VOLUME("Front Playback Volume", 0x0c, 0x0, HDA_OUTPUT),
HDA_CODEC_MUTE("Front Playback Switch", 0x14, 0x0, HDA_OUTPUT),
HDA_CODEC_VOLUME("Surround Playback Volume", 0x0f, 0x0, HDA_OUTPUT),
HDA_CODEC_MUTE("Surround Playback Switch", 0x1a, 0x0, HDA_OUTPUT),
HDA_CODEC_VOLUME_MONO("Center Playback Volume", 0x0e, 1, 0x0, HDA_OUTPUT),
HDA_CODEC_VOLUME_MONO("LFE Playback Volume", 0x0e, 2, 0x0, HDA_OUTPUT),
HDA_CODEC_MUTE_MONO("Center Playback Switch", 0x18, 1, 0x0, HDA_OUTPUT),
HDA_CODEC_MUTE_MONO("LFE Playback Switch", 0x18, 2, 0x0, HDA_OUTPUT),
HDA_CODEC_VOLUME("CD Playback Volume", 0x0b, 0x04, HDA_INPUT),
HDA_CODEC_MUTE("CD Playback Switch", 0x0b, 0x04, HDA_INPUT),
HDA_CODEC_VOLUME("Line Playback Volume", 0x0b, 0x02, HDA_INPUT),
HDA_CODEC_MUTE("Line Playback Switch", 0x0b, 0x02, HDA_INPUT),
HDA_CODEC_VOLUME("Mic Playback Volume", 0x0b, 0x0, HDA_INPUT),
HDA_CODEC_MUTE("Mic Playback Switch", 0x0b, 0x0, HDA_INPUT),
HDA_CODEC_VOLUME("Front Mic Playback Volume", 0x0b, 0x3, HDA_INPUT),
HDA_CODEC_MUTE("Front Mic Playback Switch", 0x0b, 0x3, HDA_INPUT),
HDA_CODEC_VOLUME("PC Speaker Playback Volume", 0x0b, 0x05, HDA_INPUT),
HDA_CODEC_MUTE("PC Speaker Playback Switch", 0x0b, 0x05, HDA_INPUT),
HDA_CODEC_VOLUME("Headphone Playback Volume", 0x0d, 0x0, HDA_OUTPUT),
HDA_CODEC_MUTE("Headphone Playback Switch", 0x19, 0x0, HDA_OUTPUT),
/* We don't use NID 0x07 - see above */
HDA_CODEC_VOLUME("Capture Volume", 0x08, 0x0, HDA_INPUT),
HDA_CODEC_MUTE("Capture Switch", 0x08, 0x0, HDA_INPUT),
HDA_CODEC_VOLUME_IDX("Capture Volume", 1, 0x09, 0x0, HDA_INPUT),
HDA_CODEC_MUTE_IDX("Capture Switch", 1, 0x09, 0x0, HDA_INPUT),
{
.iface = SNDRV_CTL_ELEM_IFACE_MIXER,
/* The multiple "Capture Source" controls confuse alsamixer
* So call somewhat different..
* FIXME: the controls appear in the "playback" view!
*/
/* .name = "Capture Source", */
.name = "Input Source",
.count = 2,
.info = alc_mux_enum_info,
.get = alc_mux_enum_get,
.put = alc_mux_enum_put,
},
{
.iface = SNDRV_CTL_ELEM_IFACE_MIXER,
.name = "Channel Mode",
.info = alc880_ch_mode_info,
.get = alc880_ch_mode_get,
.put = alc880_ch_mode_put,
},
{ } /* end */
};
/* 5-stack mode
* Pin assignment: Front=0x14, Rear=0x17, CLFE=0x16
* Line-In/Side=0x1a, Mic=0x18, F-Mic=0x1b, HP=0x19
*/
static snd_kcontrol_new_t alc880_five_stack_mixer[] = {
HDA_CODEC_VOLUME("Front Playback Volume", 0x0c, 0x0, HDA_OUTPUT),
HDA_CODEC_MUTE("Front Playback Switch", 0x14, 0x0, HDA_OUTPUT),
HDA_CODEC_VOLUME("Surround Playback Volume", 0x0f, 0x0, HDA_OUTPUT),
HDA_CODEC_MUTE("Surround Playback Switch", 0x17, 0x0, HDA_OUTPUT),
HDA_CODEC_VOLUME_MONO("Center Playback Volume", 0x0e, 1, 0x0, HDA_OUTPUT),
HDA_CODEC_VOLUME_MONO("LFE Playback Volume", 0x0e, 2, 0x0, HDA_OUTPUT),
HDA_CODEC_MUTE_MONO("Center Playback Switch", 0x16, 1, 0x0, HDA_OUTPUT),
HDA_CODEC_MUTE_MONO("LFE Playback Switch", 0x16, 2, 0x0, HDA_OUTPUT),
HDA_CODEC_VOLUME("Side Playback Volume", 0x0d, 0x0, HDA_OUTPUT),
HDA_CODEC_MUTE("Side Playback Switch", 0x1a, 0x0, HDA_OUTPUT),
HDA_CODEC_VOLUME("CD Playback Volume", 0x0b, 0x04, HDA_INPUT),
HDA_CODEC_MUTE("CD Playback Switch", 0x0b, 0x04, HDA_INPUT),
HDA_CODEC_VOLUME("Line Playback Volume", 0x0b, 0x02, HDA_INPUT),
HDA_CODEC_MUTE("Line Playback Switch", 0x0b, 0x02, HDA_INPUT),
HDA_CODEC_VOLUME("Mic Playback Volume", 0x0b, 0x0, HDA_INPUT),
HDA_CODEC_MUTE("Mic Playback Switch", 0x0b, 0x0, HDA_INPUT),
HDA_CODEC_VOLUME("Front Mic Playback Volume", 0x0b, 0x3, HDA_INPUT),
HDA_CODEC_MUTE("Front Mic Playback Switch", 0x0b, 0x3, HDA_INPUT),
HDA_CODEC_VOLUME("PC Speaker Playback Volume", 0x0b, 0x05, HDA_INPUT),
HDA_CODEC_MUTE("PC Speaker Playback Switch", 0x0b, 0x05, HDA_INPUT),
HDA_CODEC_VOLUME("Headphone Playback Volume", 0x0d, 0x0, HDA_OUTPUT),
HDA_CODEC_MUTE("Headphone Playback Switch", 0x19, 0x0, HDA_OUTPUT),
/* We don't use NID 0x07 - see above */
HDA_CODEC_VOLUME("Capture Volume", 0x08, 0x0, HDA_INPUT),
HDA_CODEC_MUTE("Capture Switch", 0x08, 0x0, HDA_INPUT),
HDA_CODEC_VOLUME_IDX("Capture Volume", 1, 0x09, 0x0, HDA_INPUT),
HDA_CODEC_MUTE_IDX("Capture Switch", 1, 0x09, 0x0, HDA_INPUT),
{
.iface = SNDRV_CTL_ELEM_IFACE_MIXER,
/* The multiple "Capture Source" controls confuse alsamixer
* So call somewhat different..
* FIXME: the controls appear in the "playback" view!
*/
/* .name = "Capture Source", */
.name = "Input Source",
.count = 2,
.info = alc_mux_enum_info,
.get = alc_mux_enum_get,
.put = alc_mux_enum_put,
},
{
.iface = SNDRV_CTL_ELEM_IFACE_MIXER,
.name = "Channel Mode",
.info = alc880_ch_mode_info,
.get = alc880_ch_mode_get,
.put = alc880_ch_mode_put,
},
{ } /* end */
};
static snd_kcontrol_new_t alc880_w810_base_mixer[] = {
HDA_CODEC_VOLUME("Front Playback Volume", 0x0c, 0x0, HDA_OUTPUT),
HDA_CODEC_MUTE("Front Playback Switch", 0x14, 0x0, HDA_OUTPUT),
HDA_CODEC_VOLUME("Surround Playback Volume", 0x0d, 0x0, HDA_OUTPUT),
HDA_CODEC_MUTE("Surround Playback Switch", 0x15, 0x0, HDA_OUTPUT),
HDA_CODEC_VOLUME_MONO("Center Playback Volume", 0x0e, 1, 0x0, HDA_OUTPUT),
HDA_CODEC_VOLUME_MONO("LFE Playback Volume", 0x0e, 2, 0x0, HDA_OUTPUT),
HDA_CODEC_MUTE_MONO("Center Playback Switch", 0x16, 1, 0x0, HDA_OUTPUT),
HDA_CODEC_MUTE_MONO("LFE Playback Switch", 0x16, 2, 0x0, HDA_OUTPUT),
HDA_CODEC_MUTE("Headphone Playback Switch", 0x1b, 0x0, HDA_OUTPUT),
HDA_CODEC_VOLUME("Capture Volume", 0x07, 0x0, HDA_INPUT),
HDA_CODEC_MUTE("Capture Switch", 0x07, 0x0, HDA_INPUT),
HDA_CODEC_VOLUME_IDX("Capture Volume", 1, 0x08, 0x0, HDA_INPUT),
HDA_CODEC_MUTE_IDX("Capture Switch", 1, 0x08, 0x0, HDA_INPUT),
HDA_CODEC_VOLUME_IDX("Capture Volume", 2, 0x09, 0x0, HDA_INPUT),
HDA_CODEC_MUTE_IDX("Capture Switch", 2, 0x09, 0x0, HDA_INPUT),
{
.iface = SNDRV_CTL_ELEM_IFACE_MIXER,
/* The multiple "Capture Source" controls confuse alsamixer
* So call somewhat different..
* FIXME: the controls appear in the "playback" view!
*/
/* .name = "Capture Source", */
.name = "Input Source",
.count = 3,
.info = alc_mux_enum_info,
.get = alc_mux_enum_get,
.put = alc_mux_enum_put,
},
{ } /* end */
};
static snd_kcontrol_new_t alc880_z71v_mixer[] = {
HDA_CODEC_VOLUME("Front Playback Volume", 0x0c, 0x0, HDA_OUTPUT),
HDA_CODEC_MUTE("Front Playback Switch", 0x14, 0x0, HDA_OUTPUT),
HDA_CODEC_VOLUME("Headphone Playback Volume", 0x0d, 0x0, HDA_OUTPUT),
HDA_CODEC_MUTE("Headphone Playback Switch", 0x15, 0x0, HDA_OUTPUT),
HDA_CODEC_VOLUME("CD Playback Volume", 0x0b, 0x04, HDA_INPUT),
HDA_CODEC_MUTE("CD Playback Switch", 0x0b, 0x04, HDA_INPUT),
HDA_CODEC_VOLUME("Mic Playback Volume", 0x0b, 0x0, HDA_INPUT),
HDA_CODEC_MUTE("Mic Playback Switch", 0x0b, 0x0, HDA_INPUT),
HDA_CODEC_VOLUME("Capture Volume", 0x07, 0x0, HDA_INPUT),
HDA_CODEC_MUTE("Capture Switch", 0x07, 0x0, HDA_INPUT),
HDA_CODEC_VOLUME_IDX("Capture Volume", 1, 0x08, 0x0, HDA_INPUT),
HDA_CODEC_MUTE_IDX("Capture Switch", 1, 0x08, 0x0, HDA_INPUT),
HDA_CODEC_VOLUME_IDX("Capture Volume", 2, 0x09, 0x0, HDA_INPUT),
HDA_CODEC_MUTE_IDX("Capture Switch", 2, 0x09, 0x0, HDA_INPUT),
{
.iface = SNDRV_CTL_ELEM_IFACE_MIXER,
/* The multiple "Capture Source" controls confuse alsamixer
* So call somewhat different..
* FIXME: the controls appear in the "playback" view!
*/
/* .name = "Capture Source", */
.name = "Input Source",
.count = 3,
.info = alc_mux_enum_info,
.get = alc_mux_enum_get,
.put = alc_mux_enum_put,
},
{ } /* end */
};
/*
*/
static int alc_build_controls(struct hda_codec *codec)
{
struct alc_spec *spec = codec->spec;
int err;
int i;
for (i = 0; i < spec->num_mixers; i++) {
err = snd_hda_add_new_ctls(codec, spec->mixers[i]);
if (err < 0)
return err;
}
if (spec->multiout.dig_out_nid) {
err = snd_hda_create_spdif_out_ctls(codec, spec->multiout.dig_out_nid);
if (err < 0)
return err;
}
if (spec->dig_in_nid) {
err = snd_hda_create_spdif_in_ctls(codec, spec->dig_in_nid);
if (err < 0)
return err;
}
return 0;
}
/*
* initialize the codec volumes, etc
*/
static struct hda_verb alc880_init_verbs_three_stack[] = {
/* Line In pin widget for input */
{0x1a, AC_VERB_SET_PIN_WIDGET_CONTROL, 0x20},
/* CD pin widget for input */
{0x1c, AC_VERB_SET_PIN_WIDGET_CONTROL, 0x20},
/* Mic1 (rear panel) pin widget for input and vref at 80% */
{0x18, AC_VERB_SET_PIN_WIDGET_CONTROL, 0x24},
/* Mic2 (front panel) pin widget for input and vref at 80% */
{0x1b, AC_VERB_SET_PIN_WIDGET_CONTROL, 0x24},
/* unmute amp left and right */
{0x07, AC_VERB_SET_AMP_GAIN_MUTE, 0x7000},
/* set connection select to mic in */
{0x07, AC_VERB_SET_CONNECT_SEL, 0x00},
/* unmute amp left and right */
{0x08, AC_VERB_SET_AMP_GAIN_MUTE, 0x7000},
/* set connection select to mic in */
{0x08, AC_VERB_SET_CONNECT_SEL, 0x00},
/* unmute amp left and right */
{0x09, AC_VERB_SET_AMP_GAIN_MUTE, 0x7000},
/* set connection select to mic in */
{0x09, AC_VERB_SET_CONNECT_SEL, 0x00},
/* unmute front mixer amp left (volume = 0) */
{0x0c, AC_VERB_SET_AMP_GAIN_MUTE, 0xb000},
/* mute pin widget amp left and right (no gain on this amp) */
{0x14, AC_VERB_SET_AMP_GAIN_MUTE, 0x0000},
/* unmute rear mixer amp left and right (volume = 0) */
{0x0f, AC_VERB_SET_AMP_GAIN_MUTE, 0xb000},
/* mute pin widget amp left and right (no gain on this amp) */
{0x1a, AC_VERB_SET_AMP_GAIN_MUTE, 0x0000},
/* unmute rear mixer amp left and right (volume = 0) */
{0x0e, AC_VERB_SET_AMP_GAIN_MUTE, 0xb000},
/* mute pin widget amp left and right (no gain on this amp) */
{0x18, AC_VERB_SET_AMP_GAIN_MUTE, 0x0000},
/* using rear surround as the path for headphone output */
/* unmute rear surround mixer amp left and right (volume = 0) */
{0x0d, AC_VERB_SET_AMP_GAIN_MUTE, 0xb000},
/* PASD 3 stack boards use the Mic 2 as the headphone output */
/* need to program the selector associated with the Mic 2 pin widget to
* surround path (index 0x01) for headphone output */
{0x11, AC_VERB_SET_CONNECT_SEL, 0x01},
/* mute pin widget amp left and right (no gain on this amp) */
{0x19, AC_VERB_SET_AMP_GAIN_MUTE, 0x0000},
/* need to retask the Mic 2 pin widget to output */
{0x19, AC_VERB_SET_PIN_WIDGET_CONTROL, 0x40},
/* Unmute input amps (CD, Line In, Mic 1 & Mic 2) for mixer widget(nid=0x0B)
* to support the input path of analog loopback
* Note: PASD motherboards uses the Line In 2 as the input for front panel
* mic (mic 2)
*/
/* Amp Indexes: CD = 0x04, Line In 1 = 0x02, Mic 1 = 0x00 & Line In 2 = 0x03 */
/* unmute CD */
{0x0b, AC_VERB_SET_AMP_GAIN_MUTE, (0x7000 | (0x04 << 8))},
/* unmute Line In */
{0x0b, AC_VERB_SET_AMP_GAIN_MUTE, (0x7000 | (0x02 << 8))},
/* unmute Mic 1 */
{0x0b, AC_VERB_SET_AMP_GAIN_MUTE, (0x7000 | (0x00 << 8))},
/* unmute Line In 2 (for PASD boards Mic 2) */
{0x0b, AC_VERB_SET_AMP_GAIN_MUTE, (0x7000 | (0x03 << 8))},
/* Unmute input amps for the line out paths to support the output path of
* analog loopback
* the mixers on the output path has 2 inputs, one from the DAC and one
* from the mixer
*/
/* Amp Indexes: DAC = 0x01 & mixer = 0x00 */
/* Unmute Front out path */
{0x0c, AC_VERB_SET_AMP_GAIN_MUTE, (0x7000 | (0x00 << 8))},
{0x0c, AC_VERB_SET_AMP_GAIN_MUTE, (0x7000 | (0x01 << 8))},
/* Unmute Surround (used as HP) out path */
{0x0d, AC_VERB_SET_AMP_GAIN_MUTE, (0x7000 | (0x00 << 8))},
{0x0d, AC_VERB_SET_AMP_GAIN_MUTE, (0x7000 | (0x01 << 8))},
/* Unmute C/LFE out path */
{0x0e, AC_VERB_SET_AMP_GAIN_MUTE, (0x7000 | (0x00 << 8))},
{0x0e, AC_VERB_SET_AMP_GAIN_MUTE, (0x7080 | (0x01 << 8))}, /* mute */
/* Unmute rear Surround out path */
{0x0f, AC_VERB_SET_AMP_GAIN_MUTE, (0x7000 | (0x00 << 8))},
{0x0f, AC_VERB_SET_AMP_GAIN_MUTE, (0x7000 | (0x01 << 8))},
{ }
};
static struct hda_verb alc880_init_verbs_five_stack[] = {
/* Line In pin widget for input */
{0x1a, AC_VERB_SET_PIN_WIDGET_CONTROL, 0x20},
/* CD pin widget for input */
{0x1c, AC_VERB_SET_PIN_WIDGET_CONTROL, 0x20},
/* Mic1 (rear panel) pin widget for input and vref at 80% */
{0x18, AC_VERB_SET_PIN_WIDGET_CONTROL, 0x24},
/* Mic2 (front panel) pin widget for input and vref at 80% */
{0x1b, AC_VERB_SET_PIN_WIDGET_CONTROL, 0x24},
/* unmute amp left and right */
{0x07, AC_VERB_SET_AMP_GAIN_MUTE, 0x7000},
/* set connection select to mic in */
{0x07, AC_VERB_SET_CONNECT_SEL, 0x00},
/* unmute amp left and right */
{0x08, AC_VERB_SET_AMP_GAIN_MUTE, 0x7000},
/* set connection select to mic in */
{0x08, AC_VERB_SET_CONNECT_SEL, 0x00},
/* unmute amp left and right */
{0x09, AC_VERB_SET_AMP_GAIN_MUTE, 0x7000},
/* set connection select to mic in */
{0x09, AC_VERB_SET_CONNECT_SEL, 0x00},
/* unmute front mixer amp left and right (volume = 0) */
{0x0c, AC_VERB_SET_AMP_GAIN_MUTE, 0xb000},
/* mute pin widget amp left and right (no gain on this amp) */
{0x14, AC_VERB_SET_AMP_GAIN_MUTE, 0x0000},
/* five rear and clfe */
/* unmute rear mixer amp left and right (volume = 0) */
{0x0f, AC_VERB_SET_AMP_GAIN_MUTE, 0xb000},
/* mute pin widget amp left and right (no gain on this amp) */
{0x17, AC_VERB_SET_AMP_GAIN_MUTE, 0x0000},
/* unmute clfe mixer amp left and right (volume = 0) */
{0x0e, AC_VERB_SET_AMP_GAIN_MUTE, 0xb000},
/* mute pin widget amp left and right (no gain on this amp) */
{0x16, AC_VERB_SET_AMP_GAIN_MUTE, 0x0000},
/* using rear surround as the path for headphone output */
/* unmute rear surround mixer amp left and right (volume = 0) */
{0x0d, AC_VERB_SET_AMP_GAIN_MUTE, 0xb000},
/* PASD 3 stack boards use the Mic 2 as the headphone output */
/* need to program the selector associated with the Mic 2 pin widget to
* surround path (index 0x01) for headphone output
*/
{0x11, AC_VERB_SET_CONNECT_SEL, 0x01},
/* mute pin widget amp left and right (no gain on this amp) */
{0x19, AC_VERB_SET_AMP_GAIN_MUTE, 0x0000},
/* need to retask the Mic 2 pin widget to output */
{0x19, AC_VERB_SET_PIN_WIDGET_CONTROL, 0x40},
/* Unmute input amps (CD, Line In, Mic 1 & Mic 2) for mixer
* widget(nid=0x0B) to support the input path of analog loopback
*/
/* Note: PASD motherboards uses the Line In 2 as the input for front panel mic (mic 2) */
/* Amp Indexes: CD = 0x04, Line In 1 = 0x02, Mic 1 = 0x00 & Line In 2 = 0x03*/
/* unmute CD */
{0x0b, AC_VERB_SET_AMP_GAIN_MUTE, (0x7000 | (0x04 << 8))},
/* unmute Line In */
{0x0b, AC_VERB_SET_AMP_GAIN_MUTE, (0x7000 | (0x02 << 8))},
/* unmute Mic 1 */
{0x0b, AC_VERB_SET_AMP_GAIN_MUTE, (0x7000 | (0x00 << 8))},
/* unmute Line In 2 (for PASD boards Mic 2) */
{0x0b, AC_VERB_SET_AMP_GAIN_MUTE, (0x7000 | (0x03 << 8))},
/* Unmute input amps for the line out paths to support the output path of
* analog loopback
* the mixers on the output path has 2 inputs, one from the DAC and
* one from the mixer
*/
/* Amp Indexes: DAC = 0x01 & mixer = 0x00 */
/* Unmute Front out path */
{0x0c, AC_VERB_SET_AMP_GAIN_MUTE, (0x7000 | (0x00 << 8))},
{0x0c, AC_VERB_SET_AMP_GAIN_MUTE, (0x7000 | (0x01 << 8))},
/* Unmute Surround (used as HP) out path */
{0x0d, AC_VERB_SET_AMP_GAIN_MUTE, (0x7000 | (0x00 << 8))},
{0x0d, AC_VERB_SET_AMP_GAIN_MUTE, (0x7000 | (0x01 << 8))},
/* Unmute C/LFE out path */
{0x0e, AC_VERB_SET_AMP_GAIN_MUTE, (0x7000 | (0x00 << 8))},
{0x0e, AC_VERB_SET_AMP_GAIN_MUTE, (0x7080 | (0x01 << 8))}, /* mute */
/* Unmute rear Surround out path */
{0x0f, AC_VERB_SET_AMP_GAIN_MUTE, (0x7000 | (0x00 << 8))},
{0x0f, AC_VERB_SET_AMP_GAIN_MUTE, (0x7000 | (0x01 << 8))},
{ }
};
static struct hda_verb alc880_w810_init_verbs[] = {
/* front channel selector/amp: input 0: DAC: unmuted, (no volume selection) */
{0x0c, AC_VERB_SET_AMP_GAIN_MUTE, 0x7000},
/* front channel selector/amp: input 1: capture mix: muted, (no volume selection) */
{0x0c, AC_VERB_SET_AMP_GAIN_MUTE, 0x7180},
/* front channel selector/amp: output 0: unmuted, max volume */
{0x0c, AC_VERB_SET_AMP_GAIN_MUTE, 0xb000},
/* front out pin: muted, (no volume selection) */
{0x14, AC_VERB_SET_AMP_GAIN_MUTE, 0xb080},
/* front out pin: NOT headphone enable, out enable, vref disabled */
{0x14, AC_VERB_SET_PIN_WIDGET_CONTROL, 0x40},
/* surround channel selector/amp: input 0: DAC: unmuted, (no volume selection) */
{0x0d, AC_VERB_SET_AMP_GAIN_MUTE, 0x7000},
/* surround channel selector/amp: input 1: capture mix: muted, (no volume selection) */
{0x0d, AC_VERB_SET_AMP_GAIN_MUTE, 0x7180},
/* surround channel selector/amp: output 0: unmuted, max volume */
{0x0d, AC_VERB_SET_AMP_GAIN_MUTE, 0xb000},
/* surround out pin: muted, (no volume selection) */
{0x15, AC_VERB_SET_AMP_GAIN_MUTE, 0xb080},
/* surround out pin: NOT headphone enable, out enable, vref disabled */
{0x15, AC_VERB_SET_PIN_WIDGET_CONTROL, 0x40},
/* c/lfe channel selector/amp: input 0: DAC: unmuted, (no volume selection) */
{0x0e, AC_VERB_SET_AMP_GAIN_MUTE, 0x7000},
/* c/lfe channel selector/amp: input 1: capture mix: muted, (no volume selection) */
{0x0e, AC_VERB_SET_AMP_GAIN_MUTE, 0x7180},
/* c/lfe channel selector/amp: output 0: unmuted, max volume */
{0x0e, AC_VERB_SET_AMP_GAIN_MUTE, 0xb000},
/* c/lfe out pin: muted, (no volume selection) */
{0x16, AC_VERB_SET_AMP_GAIN_MUTE, 0xb080},
/* c/lfe out pin: NOT headphone enable, out enable, vref disabled */
{0x16, AC_VERB_SET_PIN_WIDGET_CONTROL, 0x40},
/* hphone/speaker input selector: front DAC */
{0x13, AC_VERB_SET_CONNECT_SEL, 0x0},
/* hphone/speaker out pin: muted, (no volume selection) */
{0x1b, AC_VERB_SET_AMP_GAIN_MUTE, 0xb080},
/* hphone/speaker out pin: NOT headphone enable, out enable, vref disabled */
{0x1b, AC_VERB_SET_PIN_WIDGET_CONTROL, 0x40},
{ }
};
static struct hda_verb alc880_z71v_init_verbs[] = {
/* front channel selector/amp: input 0: DAC: unmuted, (no volume selection) */
{0x0c, AC_VERB_SET_AMP_GAIN_MUTE, 0x7000},
/* front channel selector/amp: input 1: capture mix: muted, (no volume selection) */
{0x0c, AC_VERB_SET_AMP_GAIN_MUTE, 0x7180},
/* front channel selector/amp: output 0: unmuted, max volume */
{0x0c, AC_VERB_SET_AMP_GAIN_MUTE, 0xb000},
/* front out pin: muted, (no volume selection) */
{0x14, AC_VERB_SET_AMP_GAIN_MUTE, 0xb080},
/* front out pin: NOT headphone enable, out enable, vref disabled */
{0x14, AC_VERB_SET_PIN_WIDGET_CONTROL, 0x40},
/* headphone channel selector/amp: input 0: DAC: unmuted, (no volume selection) */
{0x0d, AC_VERB_SET_AMP_GAIN_MUTE, 0x7000},
/* headphone channel selector/amp: input 1: capture mix: muted, (no volume selection) */
{0x0d, AC_VERB_SET_AMP_GAIN_MUTE, 0x7180},
/* headphone channel selector/amp: output 0: unmuted, max volume */
{0x0d, AC_VERB_SET_AMP_GAIN_MUTE, 0xb000},
/* headphone out pin: muted, (no volume selection) */
{0x15, AC_VERB_SET_AMP_GAIN_MUTE, 0xb080},
/* headpohne out pin: headphone enable, out enable, vref disabled */
{0x15, AC_VERB_SET_PIN_WIDGET_CONTROL, 0xc0},
/* Line In pin widget for input */
{0x1a, AC_VERB_SET_PIN_WIDGET_CONTROL, 0x20},
/* CD pin widget for input */
{0x1c, AC_VERB_SET_PIN_WIDGET_CONTROL, 0x20},
/* Mic1 (rear panel) pin widget for input and vref at 80% */
{0x18, AC_VERB_SET_PIN_WIDGET_CONTROL, 0x24},
/* Mic2 (front panel) pin widget for input and vref at 80% */
{0x1b, AC_VERB_SET_PIN_WIDGET_CONTROL, 0x24},
/* unmute amp left and right */
{0x07, AC_VERB_SET_AMP_GAIN_MUTE, 0x7000},
/* set connection select to mic in */
{0x07, AC_VERB_SET_CONNECT_SEL, 0x00},
/* unmute amp left and right */
{0x08, AC_VERB_SET_AMP_GAIN_MUTE, 0x7000},
/* set connection select to mic in */
{0x08, AC_VERB_SET_CONNECT_SEL, 0x00},
/* unmute amp left and right */
{0x09, AC_VERB_SET_AMP_GAIN_MUTE, 0x7000},
/* set connection select to mic in */
{0x09, AC_VERB_SET_CONNECT_SEL, 0x00},
/* Unmute input amps (CD, Line In, Mic 1 & Mic 2) for mixer
* widget(nid=0x0B) to support the input path of analog loopback
*/
/* Note: PASD motherboards uses the Line In 2 as the input for front panel mic (mic 2) */
/* Amp Indexes: CD = 0x04, Line In 1 = 0x02, Mic 1 = 0x00 & Line In 2 = 0x03*/
/* unmute CD */
{0x0b, AC_VERB_SET_AMP_GAIN_MUTE, (0x7000 | (0x04 << 8))},
/* unmute Line In */
{0x0b, AC_VERB_SET_AMP_GAIN_MUTE, (0x7000 | (0x02 << 8))},
/* unmute Mic 1 */
{0x0b, AC_VERB_SET_AMP_GAIN_MUTE, (0x7000 | (0x00 << 8))},
/* unmute Line In 2 (for PASD boards Mic 2) */
{0x0b, AC_VERB_SET_AMP_GAIN_MUTE, (0x7000 | (0x03 << 8))},
{ }
};
static int alc_init(struct hda_codec *codec)
{
struct alc_spec *spec = codec->spec;
snd_hda_sequence_write(codec, spec->init_verbs);
return 0;
}
#ifdef CONFIG_PM
/*
* resume
*/
static int alc_resume(struct hda_codec *codec)
{
struct alc_spec *spec = codec->spec;
int i;
alc_init(codec);
for (i = 0; i < spec->num_mixers; i++) {
snd_hda_resume_ctls(codec, spec->mixers[i]);
}
if (spec->multiout.dig_out_nid)
snd_hda_resume_spdif_out(codec);
if (spec->dig_in_nid)
snd_hda_resume_spdif_in(codec);
return 0;
}
#endif
/*
* Analog playback callbacks
*/
static int alc880_playback_pcm_open(struct hda_pcm_stream *hinfo,
struct hda_codec *codec,
snd_pcm_substream_t *substream)
{
struct alc_spec *spec = codec->spec;
return snd_hda_multi_out_analog_open(codec, &spec->multiout, substream);
}
static int alc880_playback_pcm_prepare(struct hda_pcm_stream *hinfo,
struct hda_codec *codec,
unsigned int stream_tag,
unsigned int format,
snd_pcm_substream_t *substream)
{
struct alc_spec *spec = codec->spec;
return snd_hda_multi_out_analog_prepare(codec, &spec->multiout, stream_tag,
format, substream);
}
static int alc880_playback_pcm_cleanup(struct hda_pcm_stream *hinfo,
struct hda_codec *codec,
snd_pcm_substream_t *substream)
{
struct alc_spec *spec = codec->spec;
return snd_hda_multi_out_analog_cleanup(codec, &spec->multiout);
}
/*
* Digital out
*/
static int alc880_dig_playback_pcm_open(struct hda_pcm_stream *hinfo,
struct hda_codec *codec,
snd_pcm_substream_t *substream)
{
struct alc_spec *spec = codec->spec;
return snd_hda_multi_out_dig_open(codec, &spec->multiout);
}
static int alc880_dig_playback_pcm_close(struct hda_pcm_stream *hinfo,
struct hda_codec *codec,
snd_pcm_substream_t *substream)
{
struct alc_spec *spec = codec->spec;
return snd_hda_multi_out_dig_close(codec, &spec->multiout);
}
/*
* Analog capture
*/
static int alc880_capture_pcm_prepare(struct hda_pcm_stream *hinfo,
struct hda_codec *codec,
unsigned int stream_tag,
unsigned int format,
snd_pcm_substream_t *substream)
{
struct alc_spec *spec = codec->spec;
snd_hda_codec_setup_stream(codec, spec->adc_nids[substream->number],
stream_tag, 0, format);
return 0;
}
static int alc880_capture_pcm_cleanup(struct hda_pcm_stream *hinfo,
struct hda_codec *codec,
snd_pcm_substream_t *substream)
{
struct alc_spec *spec = codec->spec;
snd_hda_codec_setup_stream(codec, spec->adc_nids[substream->number], 0, 0, 0);
return 0;
}
/*
*/
static struct hda_pcm_stream alc880_pcm_analog_playback = {
.substreams = 1,
.channels_min = 2,
.channels_max = 8,
.nid = 0x02, /* NID to query formats and rates */
.ops = {
.open = alc880_playback_pcm_open,
.prepare = alc880_playback_pcm_prepare,
.cleanup = alc880_playback_pcm_cleanup
},
};
static struct hda_pcm_stream alc880_pcm_analog_capture = {
.substreams = 2,
.channels_min = 2,
.channels_max = 2,
.nid = 0x08, /* NID to query formats and rates
* (0x07 might be broken on some devices)
*/
.ops = {
.prepare = alc880_capture_pcm_prepare,
.cleanup = alc880_capture_pcm_cleanup
},
};
static struct hda_pcm_stream alc880_pcm_digital_playback = {
.substreams = 1,
.channels_min = 2,
.channels_max = 2,
/* NID is set in alc_build_pcms */
.ops = {
.open = alc880_dig_playback_pcm_open,
.close = alc880_dig_playback_pcm_close
},
};
static struct hda_pcm_stream alc880_pcm_digital_capture = {
.substreams = 1,
.channels_min = 2,
.channels_max = 2,
/* NID is set in alc_build_pcms */
};
static int alc_build_pcms(struct hda_codec *codec)
{
struct alc_spec *spec = codec->spec;
struct hda_pcm *info = spec->pcm_rec;
int i;
codec->num_pcms = 1;
codec->pcm_info = info;
info->name = spec->stream_name_analog;
info->stream[SNDRV_PCM_STREAM_PLAYBACK] = *(spec->stream_analog_playback);
info->stream[SNDRV_PCM_STREAM_CAPTURE] = *(spec->stream_analog_capture);
info->stream[SNDRV_PCM_STREAM_PLAYBACK].channels_max = 0;
for (i = 0; i < spec->num_channel_mode; i++) {
if (spec->channel_mode[i].channels > info->stream[SNDRV_PCM_STREAM_PLAYBACK].channels_max) {
info->stream[SNDRV_PCM_STREAM_PLAYBACK].channels_max = spec->channel_mode[i].channels;
}
}
if (spec->multiout.dig_out_nid || spec->dig_in_nid) {
codec->num_pcms++;
info++;
info->name = spec->stream_name_digital;
if (spec->multiout.dig_out_nid) {
info->stream[SNDRV_PCM_STREAM_PLAYBACK] = *(spec->stream_digital_playback);
info->stream[SNDRV_PCM_STREAM_PLAYBACK].nid = spec->multiout.dig_out_nid;
}
if (spec->dig_in_nid) {
info->stream[SNDRV_PCM_STREAM_CAPTURE] = *(spec->stream_digital_capture);
info->stream[SNDRV_PCM_STREAM_CAPTURE].nid = spec->dig_in_nid;
}
}
return 0;
}
static void alc_free(struct hda_codec *codec)
{
kfree(codec->spec);
}
/*
*/
static struct hda_codec_ops alc_patch_ops = {
.build_controls = alc_build_controls,
.build_pcms = alc_build_pcms,
.init = alc_init,
.free = alc_free,
#ifdef CONFIG_PM
.resume = alc_resume,
#endif
};
/*
* Test configuration for debugging
*
* Almost all inputs/outputs are enabled. I/O pins can be configured via
* enum controls.
*/
#ifdef CONFIG_SND_DEBUG
static hda_nid_t alc880_test_dac_nids[4] = {
0x02, 0x03, 0x04, 0x05
};
static struct hda_input_mux alc880_test_capture_source = {
.num_items = 5,
.items = {
{ "In-1", 0x0 },
{ "In-2", 0x1 },
{ "In-3", 0x2 },
{ "In-4", 0x3 },
{ "CD", 0x4 },
},
};
static struct alc_channel_mode alc880_test_modes[4] = {
{ 2, NULL },
{ 4, NULL },
{ 6, NULL },
{ 8, NULL },
};
static int alc_test_pin_ctl_info(snd_kcontrol_t *kcontrol, snd_ctl_elem_info_t *uinfo)
{
static char *texts[] = {
"N/A", "Line Out", "HP Out",
"In Hi-Z", "In 50%", "In Grd", "In 80%", "In 100%"
};
uinfo->type = SNDRV_CTL_ELEM_TYPE_ENUMERATED;
uinfo->count = 1;
uinfo->value.enumerated.items = 8;
if (uinfo->value.enumerated.item >= 8)
uinfo->value.enumerated.item = 7;
strcpy(uinfo->value.enumerated.name, texts[uinfo->value.enumerated.item]);
return 0;
}
static int alc_test_pin_ctl_get(snd_kcontrol_t *kcontrol, snd_ctl_elem_value_t *ucontrol)
{
struct hda_codec *codec = snd_kcontrol_chip(kcontrol);
hda_nid_t nid = (hda_nid_t)kcontrol->private_value;
unsigned int pin_ctl, item = 0;
pin_ctl = snd_hda_codec_read(codec, nid, 0,
AC_VERB_GET_PIN_WIDGET_CONTROL, 0);
if (pin_ctl & AC_PINCTL_OUT_EN) {
if (pin_ctl & AC_PINCTL_HP_EN)
item = 2;
else
item = 1;
} else if (pin_ctl & AC_PINCTL_IN_EN) {
switch (pin_ctl & AC_PINCTL_VREFEN) {
case AC_PINCTL_VREF_HIZ: item = 3; break;
case AC_PINCTL_VREF_50: item = 4; break;
case AC_PINCTL_VREF_GRD: item = 5; break;
case AC_PINCTL_VREF_80: item = 6; break;
case AC_PINCTL_VREF_100: item = 7; break;
}
}
ucontrol->value.enumerated.item[0] = item;
return 0;
}
static int alc_test_pin_ctl_put(snd_kcontrol_t *kcontrol, snd_ctl_elem_value_t *ucontrol)
{
struct hda_codec *codec = snd_kcontrol_chip(kcontrol);
hda_nid_t nid = (hda_nid_t)kcontrol->private_value;
static unsigned int ctls[] = {
0, AC_PINCTL_OUT_EN, AC_PINCTL_OUT_EN | AC_PINCTL_HP_EN,
AC_PINCTL_IN_EN | AC_PINCTL_VREF_HIZ,
AC_PINCTL_IN_EN | AC_PINCTL_VREF_50,
AC_PINCTL_IN_EN | AC_PINCTL_VREF_GRD,
AC_PINCTL_IN_EN | AC_PINCTL_VREF_80,
AC_PINCTL_IN_EN | AC_PINCTL_VREF_100,
};
unsigned int old_ctl, new_ctl;
old_ctl = snd_hda_codec_read(codec, nid, 0,
AC_VERB_GET_PIN_WIDGET_CONTROL, 0);
new_ctl = ctls[ucontrol->value.enumerated.item[0]];
if (old_ctl != new_ctl) {
snd_hda_codec_write(codec, nid, 0, AC_VERB_SET_PIN_WIDGET_CONTROL, new_ctl);
snd_hda_codec_write(codec, nid, 0, AC_VERB_SET_AMP_GAIN_MUTE,
ucontrol->value.enumerated.item[0] >= 3 ? 0xb080 : 0xb000);
return 1;
}
return 0;
}
static int alc_test_pin_src_info(snd_kcontrol_t *kcontrol, snd_ctl_elem_info_t *uinfo)
{
static char *texts[] = {
"Front", "Surround", "CLFE", "Side"
};
uinfo->type = SNDRV_CTL_ELEM_TYPE_ENUMERATED;
uinfo->count = 1;
uinfo->value.enumerated.items = 4;
if (uinfo->value.enumerated.item >= 4)
uinfo->value.enumerated.item = 3;
strcpy(uinfo->value.enumerated.name, texts[uinfo->value.enumerated.item]);
return 0;
}
static int alc_test_pin_src_get(snd_kcontrol_t *kcontrol, snd_ctl_elem_value_t *ucontrol)
{
struct hda_codec *codec = snd_kcontrol_chip(kcontrol);
hda_nid_t nid = (hda_nid_t)kcontrol->private_value;
unsigned int sel;
sel = snd_hda_codec_read(codec, nid, 0, AC_VERB_GET_CONNECT_SEL, 0);
ucontrol->value.enumerated.item[0] = sel & 3;
return 0;
}
static int alc_test_pin_src_put(snd_kcontrol_t *kcontrol, snd_ctl_elem_value_t *ucontrol)
{
struct hda_codec *codec = snd_kcontrol_chip(kcontrol);
hda_nid_t nid = (hda_nid_t)kcontrol->private_value;
unsigned int sel;
sel = snd_hda_codec_read(codec, nid, 0, AC_VERB_GET_CONNECT_SEL, 0) & 3;
if (ucontrol->value.enumerated.item[0] != sel) {
sel = ucontrol->value.enumerated.item[0] & 3;
snd_hda_codec_write(codec, nid, 0, AC_VERB_SET_CONNECT_SEL, sel);
return 1;
}
return 0;
}
#define PIN_CTL_TEST(xname,nid) { \
.iface = SNDRV_CTL_ELEM_IFACE_MIXER, \
.name = xname, \
.info = alc_test_pin_ctl_info, \
.get = alc_test_pin_ctl_get, \
.put = alc_test_pin_ctl_put, \
.private_value = nid \
}
#define PIN_SRC_TEST(xname,nid) { \
.iface = SNDRV_CTL_ELEM_IFACE_MIXER, \
.name = xname, \
.info = alc_test_pin_src_info, \
.get = alc_test_pin_src_get, \
.put = alc_test_pin_src_put, \
.private_value = nid \
}
static snd_kcontrol_new_t alc880_test_mixer[] = {
HDA_CODEC_VOLUME("Front Playback Volume", 0x0c, 0x0, HDA_OUTPUT),
HDA_CODEC_VOLUME("Surround Playback Volume", 0x0d, 0x0, HDA_OUTPUT),
HDA_CODEC_VOLUME("CLFE Playback Volume", 0x0e, 0x0, HDA_OUTPUT),
HDA_CODEC_VOLUME("Side Playback Volume", 0x0f, 0x0, HDA_OUTPUT),
PIN_CTL_TEST("Front Pin Mode", 0x14),
PIN_CTL_TEST("Surround Pin Mode", 0x15),
PIN_CTL_TEST("CLFE Pin Mode", 0x16),
PIN_CTL_TEST("Side Pin Mode", 0x17),
PIN_CTL_TEST("In-1 Pin Mode", 0x18),
PIN_CTL_TEST("In-2 Pin Mode", 0x19),
PIN_CTL_TEST("In-3 Pin Mode", 0x1a),
PIN_CTL_TEST("In-4 Pin Mode", 0x1b),
PIN_SRC_TEST("In-1 Pin Source", 0x18),
PIN_SRC_TEST("In-2 Pin Source", 0x19),
PIN_SRC_TEST("In-3 Pin Source", 0x1a),
PIN_SRC_TEST("In-4 Pin Source", 0x1b),
HDA_CODEC_VOLUME("In-1 Playback Volume", 0x0b, 0x0, HDA_INPUT),
HDA_CODEC_MUTE("In-1 Playback Switch", 0x0b, 0x0, HDA_INPUT),
HDA_CODEC_VOLUME("In-2 Playback Volume", 0x0b, 0x1, HDA_INPUT),
HDA_CODEC_MUTE("In-2 Playback Switch", 0x0b, 0x1, HDA_INPUT),
HDA_CODEC_VOLUME("In-3 Playback Volume", 0x0b, 0x2, HDA_INPUT),
HDA_CODEC_MUTE("In-3 Playback Switch", 0x0b, 0x2, HDA_INPUT),
HDA_CODEC_VOLUME("In-4 Playback Volume", 0x0b, 0x3, HDA_INPUT),
HDA_CODEC_MUTE("In-4 Playback Switch", 0x0b, 0x3, HDA_INPUT),
HDA_CODEC_VOLUME("CD Playback Volume", 0x0b, 0x4, HDA_INPUT),
HDA_CODEC_MUTE("CD Playback Switch", 0x0b, 0x4, HDA_INPUT),
HDA_CODEC_VOLUME("Capture Volume", 0x07, 0x0, HDA_INPUT),
HDA_CODEC_MUTE("Capture Switch", 0x07, 0x0, HDA_INPUT),
HDA_CODEC_VOLUME_IDX("Capture Volume", 1, 0x08, 0x0, HDA_INPUT),
HDA_CODEC_MUTE_IDX("Capture Switch", 1, 0x08, 0x0, HDA_INPUT),
{
.iface = SNDRV_CTL_ELEM_IFACE_MIXER,
.name = "Input Source",
.count = 2,
.info = alc_mux_enum_info,
.get = alc_mux_enum_get,
.put = alc_mux_enum_put,
},
{
.iface = SNDRV_CTL_ELEM_IFACE_MIXER,
.name = "Channel Mode",
.info = alc880_ch_mode_info,
.get = alc880_ch_mode_get,
.put = alc880_ch_mode_put,
.private_value = ARRAY_SIZE(alc880_test_modes),
},
{ } /* end */
};
static struct hda_verb alc880_test_init_verbs[] = {
/* Unmute inputs of 0x0c - 0x0f */
{0x0c, AC_VERB_SET_AMP_GAIN_MUTE, 0x7000},
{0x0c, AC_VERB_SET_AMP_GAIN_MUTE, 0x7100},
{0x0d, AC_VERB_SET_AMP_GAIN_MUTE, 0x7000},
{0x0d, AC_VERB_SET_AMP_GAIN_MUTE, 0x7100},
{0x0e, AC_VERB_SET_AMP_GAIN_MUTE, 0x7000},
{0x0e, AC_VERB_SET_AMP_GAIN_MUTE, 0x7100},
{0x0f, AC_VERB_SET_AMP_GAIN_MUTE, 0x7000},
{0x0f, AC_VERB_SET_AMP_GAIN_MUTE, 0x7100},
/* Vol output for 0x0c-0x0f */
{0x0c, AC_VERB_SET_AMP_GAIN_MUTE, 0xb000},
{0x0d, AC_VERB_SET_AMP_GAIN_MUTE, 0xb000},
{0x0e, AC_VERB_SET_AMP_GAIN_MUTE, 0xb000},
{0x0f, AC_VERB_SET_AMP_GAIN_MUTE, 0xb000},
/* Set output pins 0x14-0x17 */
{0x14, AC_VERB_SET_PIN_WIDGET_CONTROL, 0x40},
{0x15, AC_VERB_SET_PIN_WIDGET_CONTROL, 0x40},
{0x16, AC_VERB_SET_PIN_WIDGET_CONTROL, 0x40},
{0x17, AC_VERB_SET_PIN_WIDGET_CONTROL, 0x40},
/* Unmute output pins 0x14-0x17 */
{0x14, AC_VERB_SET_AMP_GAIN_MUTE, 0xb080},
{0x15, AC_VERB_SET_AMP_GAIN_MUTE, 0xb080},
{0x16, AC_VERB_SET_AMP_GAIN_MUTE, 0xb080},
{0x17, AC_VERB_SET_AMP_GAIN_MUTE, 0xb080},
/* Set input pins 0x18-0x1c */
{0x18, AC_VERB_SET_PIN_WIDGET_CONTROL, 0x24}, /* vref 80% */
{0x19, AC_VERB_SET_PIN_WIDGET_CONTROL, 0x24},
{0x1a, AC_VERB_SET_PIN_WIDGET_CONTROL, 0x20},
{0x1b, AC_VERB_SET_PIN_WIDGET_CONTROL, 0x20},
{0x1c, AC_VERB_SET_PIN_WIDGET_CONTROL, 0x20},
/* Mute input pins 0x18-0x1b */
{0x18, AC_VERB_SET_AMP_GAIN_MUTE, 0xb080},
{0x19, AC_VERB_SET_AMP_GAIN_MUTE, 0xb080},
{0x1a, AC_VERB_SET_AMP_GAIN_MUTE, 0xb080},
{0x1b, AC_VERB_SET_AMP_GAIN_MUTE, 0xb080},
/* ADC set up */
{0x07, AC_VERB_SET_AMP_GAIN_MUTE, 0x7000},
{0x07, AC_VERB_SET_CONNECT_SEL, 0x00},
{0x08, AC_VERB_SET_AMP_GAIN_MUTE, 0x7000},
{0x08, AC_VERB_SET_CONNECT_SEL, 0x00},
{0x09, AC_VERB_SET_AMP_GAIN_MUTE, 0x7000},
{0x09, AC_VERB_SET_CONNECT_SEL, 0x00},
{ }
};
#endif
/*
*/
static struct hda_board_config alc880_cfg_tbl[] = {
/* Back 3 jack, front 2 jack */
{ .modelname = "3stack", .config = ALC880_3ST },
{ .pci_subvendor = 0x8086, .pci_subdevice = 0xe200, .config = ALC880_3ST },
{ .pci_subvendor = 0x8086, .pci_subdevice = 0xe201, .config = ALC880_3ST },
{ .pci_subvendor = 0x8086, .pci_subdevice = 0xe202, .config = ALC880_3ST },
{ .pci_subvendor = 0x8086, .pci_subdevice = 0xe203, .config = ALC880_3ST },
{ .pci_subvendor = 0x8086, .pci_subdevice = 0xe204, .config = ALC880_3ST },
{ .pci_subvendor = 0x8086, .pci_subdevice = 0xe205, .config = ALC880_3ST },
{ .pci_subvendor = 0x8086, .pci_subdevice = 0xe206, .config = ALC880_3ST },
{ .pci_subvendor = 0x8086, .pci_subdevice = 0xe207, .config = ALC880_3ST },
{ .pci_subvendor = 0x8086, .pci_subdevice = 0xe208, .config = ALC880_3ST },
{ .pci_subvendor = 0x8086, .pci_subdevice = 0xe209, .config = ALC880_3ST },
{ .pci_subvendor = 0x8086, .pci_subdevice = 0xe20a, .config = ALC880_3ST },
{ .pci_subvendor = 0x8086, .pci_subdevice = 0xe20b, .config = ALC880_3ST },
{ .pci_subvendor = 0x8086, .pci_subdevice = 0xe20c, .config = ALC880_3ST },
{ .pci_subvendor = 0x8086, .pci_subdevice = 0xe20d, .config = ALC880_3ST },
{ .pci_subvendor = 0x8086, .pci_subdevice = 0xe20e, .config = ALC880_3ST },
{ .pci_subvendor = 0x8086, .pci_subdevice = 0xe20f, .config = ALC880_3ST },
{ .pci_subvendor = 0x8086, .pci_subdevice = 0xe210, .config = ALC880_3ST },
{ .pci_subvendor = 0x8086, .pci_subdevice = 0xe211, .config = ALC880_3ST },
{ .pci_subvendor = 0x8086, .pci_subdevice = 0xe214, .config = ALC880_3ST },
{ .pci_subvendor = 0x8086, .pci_subdevice = 0xe302, .config = ALC880_3ST },
{ .pci_subvendor = 0x8086, .pci_subdevice = 0xe303, .config = ALC880_3ST },
{ .pci_subvendor = 0x8086, .pci_subdevice = 0xe304, .config = ALC880_3ST },
{ .pci_subvendor = 0x8086, .pci_subdevice = 0xe306, .config = ALC880_3ST },
{ .pci_subvendor = 0x8086, .pci_subdevice = 0xe307, .config = ALC880_3ST },
{ .pci_subvendor = 0x8086, .pci_subdevice = 0xe404, .config = ALC880_3ST },
{ .pci_subvendor = 0x8086, .pci_subdevice = 0xa101, .config = ALC880_3ST },
{ .pci_subvendor = 0x107b, .pci_subdevice = 0x3031, .config = ALC880_3ST },
{ .pci_subvendor = 0x107b, .pci_subdevice = 0x4036, .config = ALC880_3ST },
{ .pci_subvendor = 0x107b, .pci_subdevice = 0x4037, .config = ALC880_3ST },
{ .pci_subvendor = 0x107b, .pci_subdevice = 0x4038, .config = ALC880_3ST },
{ .pci_subvendor = 0x107b, .pci_subdevice = 0x4040, .config = ALC880_3ST },
{ .pci_subvendor = 0x107b, .pci_subdevice = 0x4041, .config = ALC880_3ST },
/* Back 3 jack, front 2 jack (Internal add Aux-In) */
{ .pci_subvendor = 0x1025, .pci_subdevice = 0xe310, .config = ALC880_3ST },
/* Back 3 jack plus 1 SPDIF out jack, front 2 jack */
{ .modelname = "3stack-digout", .config = ALC880_3ST_DIG },
{ .pci_subvendor = 0x8086, .pci_subdevice = 0xe308, .config = ALC880_3ST_DIG },
/* Back 3 jack plus 1 SPDIF out jack, front 2 jack (Internal add Aux-In)*/
{ .pci_subvendor = 0x8086, .pci_subdevice = 0xe305, .config = ALC880_3ST_DIG },
{ .pci_subvendor = 0x8086, .pci_subdevice = 0xd402, .config = ALC880_3ST_DIG },
{ .pci_subvendor = 0x1025, .pci_subdevice = 0xe309, .config = ALC880_3ST_DIG },
/* Back 5 jack, front 2 jack */
{ .modelname = "5stack", .config = ALC880_5ST },
{ .pci_subvendor = 0x107b, .pci_subdevice = 0x3033, .config = ALC880_5ST },
{ .pci_subvendor = 0x107b, .pci_subdevice = 0x4039, .config = ALC880_5ST },
{ .pci_subvendor = 0x107b, .pci_subdevice = 0x3032, .config = ALC880_5ST },
{ .pci_subvendor = 0x103c, .pci_subdevice = 0x2a09, .config = ALC880_5ST },
/* Back 5 jack plus 1 SPDIF out jack, front 2 jack */
{ .modelname = "5stack-digout", .config = ALC880_5ST_DIG },
{ .pci_subvendor = 0x8086, .pci_subdevice = 0xe224, .config = ALC880_5ST_DIG },
{ .pci_subvendor = 0x8086, .pci_subdevice = 0xe400, .config = ALC880_5ST_DIG },
{ .pci_subvendor = 0x8086, .pci_subdevice = 0xe401, .config = ALC880_5ST_DIG },
{ .pci_subvendor = 0x8086, .pci_subdevice = 0xe402, .config = ALC880_5ST_DIG },
{ .pci_subvendor = 0x8086, .pci_subdevice = 0xd400, .config = ALC880_5ST_DIG },
{ .pci_subvendor = 0x8086, .pci_subdevice = 0xd401, .config = ALC880_5ST_DIG },
{ .pci_subvendor = 0x8086, .pci_subdevice = 0xa100, .config = ALC880_5ST_DIG },
{ .pci_subvendor = 0x1565, .pci_subdevice = 0x8202, .config = ALC880_5ST_DIG },
{ .modelname = "w810", .config = ALC880_W810 },
{ .pci_subvendor = 0x161f, .pci_subdevice = 0x203d, .config = ALC880_W810 },
{ .modelname = "z71v", .config = ALC880_Z71V },
{ .pci_subvendor = 0x1043, .pci_subdevice = 0x1964, .config = ALC880_Z71V },
#ifdef CONFIG_SND_DEBUG
{ .modelname = "test", .config = ALC880_TEST },
#endif
{}
};
static int patch_alc880(struct hda_codec *codec)
{
struct alc_spec *spec;
int board_config;
spec = kcalloc(1, sizeof(*spec), GFP_KERNEL);
if (spec == NULL)
return -ENOMEM;
codec->spec = spec;
board_config = snd_hda_check_board_config(codec, alc880_cfg_tbl);
if (board_config < 0) {
snd_printd(KERN_INFO "hda_codec: Unknown model for ALC880\n");
board_config = ALC880_MINIMAL;
}
switch (board_config) {
case ALC880_W810:
spec->mixers[spec->num_mixers] = alc880_w810_base_mixer;
spec->num_mixers++;
break;
case ALC880_5ST:
case ALC880_5ST_DIG:
spec->mixers[spec->num_mixers] = alc880_five_stack_mixer;
spec->num_mixers++;
break;
case ALC880_Z71V:
spec->mixers[spec->num_mixers] = alc880_z71v_mixer;
spec->num_mixers++;
break;
#ifdef CONFIG_SND_DEBUG
case ALC880_TEST:
spec->mixers[spec->num_mixers] = alc880_test_mixer;
spec->num_mixers++;
break;
#endif
default:
spec->mixers[spec->num_mixers] = alc880_base_mixer;
spec->num_mixers++;
break;
}
switch (board_config) {
case ALC880_3ST_DIG:
case ALC880_5ST_DIG:
case ALC880_W810:
case ALC880_Z71V:
case ALC880_TEST:
spec->multiout.dig_out_nid = ALC880_DIGOUT_NID;
break;
default:
break;
}
switch (board_config) {
case ALC880_3ST:
case ALC880_3ST_DIG:
case ALC880_5ST:
case ALC880_5ST_DIG:
case ALC880_W810:
spec->front_panel = 1;
break;
default:
break;
}
switch (board_config) {
case ALC880_5ST:
case ALC880_5ST_DIG:
spec->init_verbs = alc880_init_verbs_five_stack;
spec->channel_mode = alc880_fivestack_modes;
spec->num_channel_mode = ARRAY_SIZE(alc880_fivestack_modes);
break;
case ALC880_W810:
spec->init_verbs = alc880_w810_init_verbs;
spec->channel_mode = alc880_w810_modes;
spec->num_channel_mode = ARRAY_SIZE(alc880_w810_modes);
break;
case ALC880_Z71V:
spec->init_verbs = alc880_z71v_init_verbs;
spec->channel_mode = alc880_z71v_modes;
spec->num_channel_mode = ARRAY_SIZE(alc880_z71v_modes);
break;
#ifdef CONFIG_SND_DEBUG
case ALC880_TEST:
spec->init_verbs = alc880_test_init_verbs;
spec->channel_mode = alc880_test_modes;
spec->num_channel_mode = ARRAY_SIZE(alc880_test_modes);
break;
#endif
default:
spec->init_verbs = alc880_init_verbs_three_stack;
spec->channel_mode = alc880_threestack_modes;
spec->num_channel_mode = ARRAY_SIZE(alc880_threestack_modes);
break;
}
spec->stream_name_analog = "ALC880 Analog";
spec->stream_analog_playback = &alc880_pcm_analog_playback;
spec->stream_analog_capture = &alc880_pcm_analog_capture;
spec->stream_name_digital = "ALC880 Digital";
spec->stream_digital_playback = &alc880_pcm_digital_playback;
spec->stream_digital_capture = &alc880_pcm_digital_capture;
spec->multiout.max_channels = spec->channel_mode[0].channels;
switch (board_config) {
case ALC880_W810:
spec->multiout.num_dacs = ARRAY_SIZE(alc880_w810_dac_nids);
spec->multiout.dac_nids = alc880_w810_dac_nids;
// No dedicated headphone socket - it's shared with built-in speakers.
break;
case ALC880_Z71V:
spec->multiout.num_dacs = ARRAY_SIZE(alc880_z71v_dac_nids);
spec->multiout.dac_nids = alc880_z71v_dac_nids;
spec->multiout.hp_nid = 0x03;
break;
#ifdef CONFIG_SND_DEBUG
case ALC880_TEST:
spec->multiout.num_dacs = ARRAY_SIZE(alc880_test_dac_nids);
spec->multiout.dac_nids = alc880_test_dac_nids;
spec->input_mux = &alc880_test_capture_source;
break;
#endif
default:
spec->multiout.num_dacs = ARRAY_SIZE(alc880_dac_nids);
spec->multiout.dac_nids = alc880_dac_nids;
spec->multiout.hp_nid = 0x03; /* rear-surround NID */
break;
}
if (! spec->input_mux)
spec->input_mux = &alc880_capture_source;
spec->num_adc_nids = ARRAY_SIZE(alc880_adc_nids);
spec->adc_nids = alc880_adc_nids;
codec->patch_ops = alc_patch_ops;
return 0;
}
/*
* ALC260 support
*/
/*
* This is just place-holder, so there's something for alc_build_pcms to look
* at when it calculates the maximum number of channels. ALC260 has no mixer
* element which allows changing the channel mode, so the verb list is
* never used.
*/
static struct alc_channel_mode alc260_modes[1] = {
{ 2, NULL },
};
snd_kcontrol_new_t alc260_base_mixer[] = {
HDA_CODEC_VOLUME("Front Playback Volume", 0x08, 0x0, HDA_OUTPUT),
/* use LINE2 for the output */
/* HDA_CODEC_MUTE("Front Playback Switch", 0x0f, 0x0, HDA_OUTPUT), */
HDA_CODEC_MUTE("Front Playback Switch", 0x15, 0x0, HDA_OUTPUT),
HDA_CODEC_VOLUME("CD Playback Volume", 0x07, 0x04, HDA_INPUT),
HDA_CODEC_MUTE("CD Playback Switch", 0x07, 0x04, HDA_INPUT),
HDA_CODEC_VOLUME("Line Playback Volume", 0x07, 0x02, HDA_INPUT),
HDA_CODEC_MUTE("Line Playback Switch", 0x07, 0x02, HDA_INPUT),
HDA_CODEC_VOLUME("Mic Playback Volume", 0x07, 0x0, HDA_INPUT),
HDA_CODEC_MUTE("Mic Playback Switch", 0x07, 0x0, HDA_INPUT),
HDA_CODEC_VOLUME("Front Mic Playback Volume", 0x07, 0x01, HDA_INPUT),
HDA_CODEC_MUTE("Front Mic Playback Switch", 0x07, 0x01, HDA_INPUT),
HDA_CODEC_VOLUME("PC Speaker Playback Volume", 0x07, 0x05, HDA_INPUT),
HDA_CODEC_MUTE("PC Speaker Playback Switch", 0x07, 0x05, HDA_INPUT),
HDA_CODEC_VOLUME("Headphone Playback Volume", 0x09, 0x0, HDA_OUTPUT),
HDA_CODEC_MUTE("Headphone Playback Switch", 0x10, 0x0, HDA_OUTPUT),
HDA_CODEC_VOLUME_MONO("Mono Playback Volume", 0x0a, 1, 0x0, HDA_OUTPUT),
HDA_CODEC_MUTE_MONO("Mono Playback Switch", 0x11, 1, 0x0, HDA_OUTPUT),
HDA_CODEC_VOLUME("Capture Volume", 0x04, 0x0, HDA_INPUT),
HDA_CODEC_MUTE("Capture Switch", 0x04, 0x0, HDA_INPUT),
{
.iface = SNDRV_CTL_ELEM_IFACE_MIXER,
.name = "Capture Source",
.info = alc_mux_enum_info,
.get = alc_mux_enum_get,
.put = alc_mux_enum_put,
},
{ } /* end */
};
static struct hda_verb alc260_init_verbs[] = {
/* Line In pin widget for input */
{0x14, AC_VERB_SET_PIN_WIDGET_CONTROL, 0x20},
/* CD pin widget for input */
{0x16, AC_VERB_SET_PIN_WIDGET_CONTROL, 0x20},
/* Mic1 (rear panel) pin widget for input and vref at 80% */
{0x12, AC_VERB_SET_PIN_WIDGET_CONTROL, 0x24},
/* Mic2 (front panel) pin widget for input and vref at 80% */
{0x13, AC_VERB_SET_PIN_WIDGET_CONTROL, 0x24},
/* LINE-2 is used for line-out in rear */
{0x15, AC_VERB_SET_PIN_WIDGET_CONTROL, 0x40},
/* select line-out */
{0x15, AC_VERB_SET_CONNECT_SEL, 0x00},
/* LINE-OUT pin */
{0x0f, AC_VERB_SET_PIN_WIDGET_CONTROL, 0x40},
/* enable HP */
{0x10, AC_VERB_SET_PIN_WIDGET_CONTROL, 0x40},
/* enable Mono */
{0x11, AC_VERB_SET_PIN_WIDGET_CONTROL, 0x40},
/* unmute amp left and right */
{0x04, AC_VERB_SET_AMP_GAIN_MUTE, 0x7000},
/* set connection select to line in (default select for this ADC) */
{0x04, AC_VERB_SET_CONNECT_SEL, 0x02},
/* unmute Line-Out mixer amp left and right (volume = 0) */
{0x08, AC_VERB_SET_AMP_GAIN_MUTE, 0xb000},
/* mute pin widget amp left and right (no gain on this amp) */
{0x0f, AC_VERB_SET_AMP_GAIN_MUTE, 0xb000},
/* unmute HP mixer amp left and right (volume = 0) */
{0x09, AC_VERB_SET_AMP_GAIN_MUTE, 0xb000},
/* mute pin widget amp left and right (no gain on this amp) */
{0x10, AC_VERB_SET_AMP_GAIN_MUTE, 0xb080},
/* unmute Mono mixer amp left and right (volume = 0) */
{0x0a, AC_VERB_SET_AMP_GAIN_MUTE, 0xb000},
/* mute pin widget amp left and right (no gain on this amp) */
{0x11, AC_VERB_SET_AMP_GAIN_MUTE, 0xb080},
/* mute LINE-2 out */
{0x15, AC_VERB_SET_AMP_GAIN_MUTE, 0xb080},
/* Amp Indexes: CD = 0x04, Line In 1 = 0x02, Mic 1 = 0x00 & Line In 2 = 0x03 */
/* unmute CD */
{0x07, AC_VERB_SET_AMP_GAIN_MUTE, (0x7000 | (0x04 << 8))},
/* unmute Line In */
{0x07, AC_VERB_SET_AMP_GAIN_MUTE, (0x7000 | (0x02 << 8))},
/* unmute Mic */
{0x07, AC_VERB_SET_AMP_GAIN_MUTE, (0x7000 | (0x00 << 8))},
/* Amp Indexes: DAC = 0x01 & mixer = 0x00 */
/* Unmute Front out path */
{0x08, AC_VERB_SET_AMP_GAIN_MUTE, (0x7000 | (0x00 << 8))},
{0x08, AC_VERB_SET_AMP_GAIN_MUTE, (0x7000 | (0x01 << 8))},
/* Unmute Headphone out path */
{0x09, AC_VERB_SET_AMP_GAIN_MUTE, (0x7000 | (0x00 << 8))},
{0x09, AC_VERB_SET_AMP_GAIN_MUTE, (0x7000 | (0x01 << 8))},
/* Unmute Mono out path */
{0x0a, AC_VERB_SET_AMP_GAIN_MUTE, (0x7000 | (0x00 << 8))},
{0x0a, AC_VERB_SET_AMP_GAIN_MUTE, (0x7000 | (0x01 << 8))},
{ }
};
static struct hda_pcm_stream alc260_pcm_analog_playback = {
.substreams = 1,
.channels_min = 2,
.channels_max = 2,
.nid = 0x2,
};
static struct hda_pcm_stream alc260_pcm_analog_capture = {
.substreams = 1,
.channels_min = 2,
.channels_max = 2,
.nid = 0x4,
};
static int patch_alc260(struct hda_codec *codec)
{
struct alc_spec *spec;
spec = kcalloc(1, sizeof(*spec), GFP_KERNEL);
if (spec == NULL)
return -ENOMEM;
codec->spec = spec;
spec->mixers[spec->num_mixers] = alc260_base_mixer;
spec->num_mixers++;
spec->init_verbs = alc260_init_verbs;
spec->channel_mode = alc260_modes;
spec->num_channel_mode = ARRAY_SIZE(alc260_modes);
spec->stream_name_analog = "ALC260 Analog";
spec->stream_analog_playback = &alc260_pcm_analog_playback;
spec->stream_analog_capture = &alc260_pcm_analog_capture;
spec->multiout.max_channels = spec->channel_mode[0].channels;
spec->multiout.num_dacs = ARRAY_SIZE(alc260_dac_nids);
spec->multiout.dac_nids = alc260_dac_nids;
spec->input_mux = &alc260_capture_source;
spec->num_adc_nids = ARRAY_SIZE(alc260_adc_nids);
spec->adc_nids = alc260_adc_nids;
codec->patch_ops = alc_patch_ops;
return 0;
}
/*
* ALC882 support
*
* ALC882 is almost identical with ALC880 but has cleaner and more flexible
* configuration. Each pin widget can choose any input DACs and a mixer.
* Each ADC is connected from a mixer of all inputs. This makes possible
* 6-channel independent captures.
*
* In addition, an independent DAC for the multi-playback (not used in this
* driver yet).
*/
static struct alc_channel_mode alc882_ch_modes[1] = {
{ 8, NULL }
};
static hda_nid_t alc882_dac_nids[4] = {
/* front, rear, clfe, rear_surr */
0x02, 0x03, 0x04, 0x05
};
static hda_nid_t alc882_adc_nids[3] = {
/* ADC0-2 */
0x07, 0x08, 0x09,
};
/* input MUX */
/* FIXME: should be a matrix-type input source selection */
static struct hda_input_mux alc882_capture_source = {
.num_items = 4,
.items = {
{ "Mic", 0x0 },
{ "Front Mic", 0x1 },
{ "Line", 0x2 },
{ "CD", 0x4 },
},
};
#define alc882_mux_enum_info alc_mux_enum_info
#define alc882_mux_enum_get alc_mux_enum_get
static int alc882_mux_enum_put(snd_kcontrol_t *kcontrol, snd_ctl_elem_value_t *ucontrol)
{
struct hda_codec *codec = snd_kcontrol_chip(kcontrol);
struct alc_spec *spec = codec->spec;
const struct hda_input_mux *imux = spec->input_mux;
unsigned int adc_idx = snd_ctl_get_ioffidx(kcontrol, &ucontrol->id);
static hda_nid_t capture_mixers[3] = { 0x24, 0x23, 0x22 };
hda_nid_t nid = capture_mixers[adc_idx];
unsigned int *cur_val = &spec->cur_mux[adc_idx];
unsigned int i, idx;
idx = ucontrol->value.enumerated.item[0];
if (idx >= imux->num_items)
idx = imux->num_items - 1;
if (*cur_val == idx && ! codec->in_resume)
return 0;
for (i = 0; i < imux->num_items; i++) {
unsigned int v = (i == idx) ? 0x7000 : 0x7080;
snd_hda_codec_write(codec, nid, 0, AC_VERB_SET_AMP_GAIN_MUTE,
v | (imux->items[i].index << 8));
}
*cur_val = idx;
return 1;
}
/* Pin assignment: Front=0x14, Rear=0x15, CLFE=0x16, Side=0x17
* Mic=0x18, Front Mic=0x19, Line-In=0x1a, HP=0x1b
*/
static snd_kcontrol_new_t alc882_base_mixer[] = {
HDA_CODEC_VOLUME("Front Playback Volume", 0x0c, 0x0, HDA_OUTPUT),
HDA_CODEC_MUTE("Front Playback Switch", 0x14, 0x0, HDA_OUTPUT),
HDA_CODEC_VOLUME("Surround Playback Volume", 0x0d, 0x0, HDA_OUTPUT),
HDA_CODEC_MUTE("Surround Playback Switch", 0x15, 0x0, HDA_OUTPUT),
HDA_CODEC_VOLUME_MONO("Center Playback Volume", 0x0e, 1, 0x0, HDA_OUTPUT),
HDA_CODEC_VOLUME_MONO("LFE Playback Volume", 0x0e, 2, 0x0, HDA_OUTPUT),
HDA_CODEC_MUTE_MONO("Center Playback Switch", 0x16, 1, 0x0, HDA_OUTPUT),
HDA_CODEC_MUTE_MONO("LFE Playback Switch", 0x16, 2, 0x0, HDA_OUTPUT),
HDA_CODEC_VOLUME("Side Playback Volume", 0x0f, 0x0, HDA_OUTPUT),
HDA_CODEC_MUTE("Side Playback Switch", 0x17, 0x0, HDA_OUTPUT),
HDA_CODEC_MUTE("Headphone Playback Switch", 0x1b, 0x0, HDA_OUTPUT),
HDA_CODEC_VOLUME("CD Playback Volume", 0x0b, 0x04, HDA_INPUT),
HDA_CODEC_MUTE("CD Playback Switch", 0x0b, 0x04, HDA_INPUT),
HDA_CODEC_VOLUME("Line Playback Volume", 0x0b, 0x02, HDA_INPUT),
HDA_CODEC_MUTE("Line Playback Switch", 0x0b, 0x02, HDA_INPUT),
HDA_CODEC_VOLUME("Mic Playback Volume", 0x0b, 0x0, HDA_INPUT),
HDA_CODEC_MUTE("Mic Playback Switch", 0x0b, 0x0, HDA_INPUT),
HDA_CODEC_VOLUME("Front Mic Playback Volume", 0x0b, 0x1, HDA_INPUT),
HDA_CODEC_MUTE("Front Mic Playback Switch", 0x0b, 0x1, HDA_INPUT),
HDA_CODEC_VOLUME("PC Speaker Playback Volume", 0x0b, 0x05, HDA_INPUT),
HDA_CODEC_MUTE("PC Speaker Playback Switch", 0x0b, 0x05, HDA_INPUT),
HDA_CODEC_VOLUME("Capture Volume", 0x07, 0x0, HDA_INPUT),
HDA_CODEC_MUTE("Capture Switch", 0x07, 0x0, HDA_INPUT),
HDA_CODEC_VOLUME_IDX("Capture Volume", 1, 0x08, 0x0, HDA_INPUT),
HDA_CODEC_MUTE_IDX("Capture Switch", 1, 0x08, 0x0, HDA_INPUT),
HDA_CODEC_VOLUME_IDX("Capture Volume", 2, 0x09, 0x0, HDA_INPUT),
HDA_CODEC_MUTE_IDX("Capture Switch", 2, 0x09, 0x0, HDA_INPUT),
{
.iface = SNDRV_CTL_ELEM_IFACE_MIXER,
/* .name = "Capture Source", */
.name = "Input Source",
.count = 3,
.info = alc882_mux_enum_info,
.get = alc882_mux_enum_get,
.put = alc882_mux_enum_put,
},
{ } /* end */
};
static struct hda_verb alc882_init_verbs[] = {
/* Front mixer: unmute input/output amp left and right (volume = 0) */
{0x0c, AC_VERB_SET_AMP_GAIN_MUTE, 0xb000},
{0x0c, AC_VERB_SET_AMP_GAIN_MUTE, (0x7000 | (0x00 << 8))},
/* Rear mixer */
{0x0d, AC_VERB_SET_AMP_GAIN_MUTE, 0xb000},
{0x0d, AC_VERB_SET_AMP_GAIN_MUTE, (0x7000 | (0x00 << 8))},
/* CLFE mixer */
{0x0e, AC_VERB_SET_AMP_GAIN_MUTE, 0xb000},
{0x0e, AC_VERB_SET_AMP_GAIN_MUTE, (0x7000 | (0x00 << 8))},
/* Side mixer */
{0x0f, AC_VERB_SET_AMP_GAIN_MUTE, 0xb000},
{0x0f, AC_VERB_SET_AMP_GAIN_MUTE, (0x7000 | (0x00 << 8))},
/* Front Pin: to output mode */
{0x14, AC_VERB_SET_PIN_WIDGET_CONTROL, 0x40},
/* Front Pin: mute amp left and right (no volume) */
{0x14, AC_VERB_SET_AMP_GAIN_MUTE, 0x0000},
/* select Front mixer (0x0c, index 0) */
{0x14, AC_VERB_SET_CONNECT_SEL, 0x00},
/* Rear Pin */
{0x15, AC_VERB_SET_PIN_WIDGET_CONTROL, 0x40},
/* Rear Pin: mute amp left and right (no volume) */
{0x15, AC_VERB_SET_AMP_GAIN_MUTE, 0x0000},
/* select Rear mixer (0x0d, index 1) */
{0x15, AC_VERB_SET_CONNECT_SEL, 0x01},
/* CLFE Pin */
{0x16, AC_VERB_SET_PIN_WIDGET_CONTROL, 0x40},
/* CLFE Pin: mute amp left and right (no volume) */
{0x16, AC_VERB_SET_AMP_GAIN_MUTE, 0x0000},
/* select CLFE mixer (0x0e, index 2) */
{0x16, AC_VERB_SET_CONNECT_SEL, 0x02},
/* Side Pin */
{0x17, AC_VERB_SET_PIN_WIDGET_CONTROL, 0x40},
/* Side Pin: mute amp left and right (no volume) */
{0x17, AC_VERB_SET_AMP_GAIN_MUTE, 0x0000},
/* select Side mixer (0x0f, index 3) */
{0x17, AC_VERB_SET_CONNECT_SEL, 0x03},
/* Headphone Pin */
{0x1b, AC_VERB_SET_PIN_WIDGET_CONTROL, 0x40},
/* Headphone Pin: mute amp left and right (no volume) */
{0x1b, AC_VERB_SET_AMP_GAIN_MUTE, 0x0000},
/* select Front mixer (0x0c, index 0) */
{0x1b, AC_VERB_SET_CONNECT_SEL, 0x00},
/* Mic (rear) pin widget for input and vref at 80% */
{0x18, AC_VERB_SET_PIN_WIDGET_CONTROL, 0x24},
/* Front Mic pin widget for input and vref at 80% */
{0x19, AC_VERB_SET_PIN_WIDGET_CONTROL, 0x24},
/* Line In pin widget for input */
{0x1a, AC_VERB_SET_PIN_WIDGET_CONTROL, 0x20},
/* CD pin widget for input */
{0x1c, AC_VERB_SET_PIN_WIDGET_CONTROL, 0x20},
/* FIXME: use matrix-type input source selection */
/* Mixer elements: 0x18, 19, 1a, 1b, 1c, 1d, 14, 15, 16, 17, 0b */
/* Input mixer1: unmute Mic, F-Mic, Line, CD inputs */
{0x24, AC_VERB_SET_AMP_GAIN_MUTE, (0x7000 | (0x00 << 8))},
{0x24, AC_VERB_SET_AMP_GAIN_MUTE, (0x7080 | (0x03 << 8))},
{0x24, AC_VERB_SET_AMP_GAIN_MUTE, (0x7080 | (0x02 << 8))},
{0x24, AC_VERB_SET_AMP_GAIN_MUTE, (0x7080 | (0x04 << 8))},
/* Input mixer2 */
{0x23, AC_VERB_SET_AMP_GAIN_MUTE, (0x7000 | (0x00 << 8))},
{0x23, AC_VERB_SET_AMP_GAIN_MUTE, (0x7080 | (0x03 << 8))},
{0x23, AC_VERB_SET_AMP_GAIN_MUTE, (0x7080 | (0x02 << 8))},
{0x23, AC_VERB_SET_AMP_GAIN_MUTE, (0x7080 | (0x04 << 8))},
/* Input mixer3 */
{0x22, AC_VERB_SET_AMP_GAIN_MUTE, (0x7000 | (0x00 << 8))},
{0x22, AC_VERB_SET_AMP_GAIN_MUTE, (0x7080 | (0x03 << 8))},
{0x22, AC_VERB_SET_AMP_GAIN_MUTE, (0x7080 | (0x02 << 8))},
{0x22, AC_VERB_SET_AMP_GAIN_MUTE, (0x7080 | (0x04 << 8))},
/* ADC1: unmute amp left and right */
{0x07, AC_VERB_SET_AMP_GAIN_MUTE, 0x7000},
{0x07, AC_VERB_SET_CONNECT_SEL, 0x00},
/* ADC2: unmute amp left and right */
{0x08, AC_VERB_SET_AMP_GAIN_MUTE, 0x7000},
{0x08, AC_VERB_SET_CONNECT_SEL, 0x00},
/* ADC3: unmute amp left and right */
{0x09, AC_VERB_SET_AMP_GAIN_MUTE, 0x7000},
{0x09, AC_VERB_SET_CONNECT_SEL, 0x00},
/* Unmute front loopback */
{0x0c, AC_VERB_SET_AMP_GAIN_MUTE, (0x7000 | (0x01 << 8))},
/* Unmute rear loopback */
{0x0d, AC_VERB_SET_AMP_GAIN_MUTE, (0x7000 | (0x01 << 8))},
/* Mute CLFE loopback */
{0x0e, AC_VERB_SET_AMP_GAIN_MUTE, (0x7080 | (0x01 << 8))},
/* Unmute side loopback */
{0x0f, AC_VERB_SET_AMP_GAIN_MUTE, (0x7000 | (0x01 << 8))},
{ }
};
static int patch_alc882(struct hda_codec *codec)
{
struct alc_spec *spec;
spec = kcalloc(1, sizeof(*spec), GFP_KERNEL);
if (spec == NULL)
return -ENOMEM;
codec->spec = spec;
spec->mixers[spec->num_mixers] = alc882_base_mixer;
spec->num_mixers++;
spec->multiout.dig_out_nid = ALC880_DIGOUT_NID;
spec->dig_in_nid = ALC880_DIGIN_NID;
spec->front_panel = 1;
spec->init_verbs = alc882_init_verbs;
spec->channel_mode = alc882_ch_modes;
spec->num_channel_mode = ARRAY_SIZE(alc882_ch_modes);
spec->stream_name_analog = "ALC882 Analog";
spec->stream_analog_playback = &alc880_pcm_analog_playback;
spec->stream_analog_capture = &alc880_pcm_analog_capture;
spec->stream_name_digital = "ALC882 Digital";
spec->stream_digital_playback = &alc880_pcm_digital_playback;
spec->stream_digital_capture = &alc880_pcm_digital_capture;
spec->multiout.max_channels = spec->channel_mode[0].channels;
spec->multiout.num_dacs = ARRAY_SIZE(alc882_dac_nids);
spec->multiout.dac_nids = alc882_dac_nids;
spec->input_mux = &alc882_capture_source;
spec->num_adc_nids = ARRAY_SIZE(alc882_adc_nids);
spec->adc_nids = alc882_adc_nids;
codec->patch_ops = alc_patch_ops;
return 0;
}
/*
* patch entries
*/
struct hda_codec_preset snd_hda_preset_realtek[] = {
{ .id = 0x10ec0260, .name = "ALC260", .patch = patch_alc260 },
{ .id = 0x10ec0880, .name = "ALC880", .patch = patch_alc880 },
{ .id = 0x10ec0882, .name = "ALC882", .patch = patch_alc882 },
{} /* terminator */
};
Reference in New Issue View Git Blame Copy Permalink