lk/linux-kernel-test
1
0
Fork 0
Code Issues Pull Requests Releases Wiki Activity
4dcf39c6cc
linux-kernel-test/drivers/infiniband/hw/ipath/ipath_common.h
Dave Olson f17fddc9e2 IB/ipath: Remove unsafe fastrcvint code from interrupt handler 
The fastrcvint code's purpose was to avoid reading the interrupt
status if kernel packets were in the receive queue (to reduce
overhead).  Because intstatus was not read, we could miss the error
interrupt bit indicating freeze mode, since it only delivers a single
interrupt, even if still pending after intclear is written.

This patch removes that unsafe optimization.

Signed-off-by: Dave Olson <dave.olson@qlogic.com>
Signed-off-by: Roland Dreier <rolandd@cisco.com>
2007-07-30 13:16:45 -07:00

783 lines
24 KiB
C
Raw Blame History

/*
* Copyright (c) 2006, 2007 QLogic Corporation. All rights reserved.
* Copyright (c) 2003, 2004, 2005, 2006 PathScale, Inc. All rights reserved.
*
* This software is available to you under a choice of one of two
* licenses. You may choose to be licensed under the terms of the GNU
* General Public License (GPL) Version 2, available from the file
* COPYING in the main directory of this source tree, or the
* OpenIB.org BSD license below:
*
* Redistribution and use in source and binary forms, with or
* without modification, are permitted provided that the following
* conditions are met:
*
* - Redistributions of source code must retain the above
* copyright notice, this list of conditions and the following
* disclaimer.
*
* - Redistributions in binary form must reproduce the above
* copyright notice, this list of conditions and the following
* disclaimer in the documentation and/or other materials
* provided with the distribution.
*
* THE SOFTWARE IS PROVIDED "AS IS", WITHOUT WARRANTY OF ANY KIND,
* EXPRESS OR IMPLIED, INCLUDING BUT NOT LIMITED TO THE WARRANTIES OF
* MERCHANTABILITY, FITNESS FOR A PARTICULAR PURPOSE AND
* NONINFRINGEMENT. IN NO EVENT SHALL THE AUTHORS OR COPYRIGHT HOLDERS
* BE LIABLE FOR ANY CLAIM, DAMAGES OR OTHER LIABILITY, WHETHER IN AN
* ACTION OF CONTRACT, TORT OR OTHERWISE, ARISING FROM, OUT OF OR IN
* CONNECTION WITH THE SOFTWARE OR THE USE OR OTHER DEALINGS IN THE
* SOFTWARE.
*/
#ifndef _IPATH_COMMON_H
#define _IPATH_COMMON_H
/*
* This file contains defines, structures, etc. that are used
* to communicate between kernel and user code.
*/
/* This is the IEEE-assigned OUI for QLogic Inc. InfiniPath */
#define IPATH_SRC_OUI_1 0x00
#define IPATH_SRC_OUI_2 0x11
#define IPATH_SRC_OUI_3 0x75
/* version of protocol header (known to chip also). In the long run,
* we should be able to generate and accept a range of version numbers;
* for now we only accept one, and it's compiled in.
*/
#define IPS_PROTO_VERSION 2
/*
* These are compile time constants that you may want to enable or disable
* if you are trying to debug problems with code or performance.
* IPATH_VERBOSE_TRACING define as 1 if you want additional tracing in
* fastpath code
* IPATH_TRACE_REGWRITES define as 1 if you want register writes to be
* traced in faspath code
* _IPATH_TRACING define as 0 if you want to remove all tracing in a
* compilation unit
* _IPATH_DEBUGGING define as 0 if you want to remove debug prints
*/
/*
* The value in the BTH QP field that InfiniPath uses to differentiate
* an infinipath protocol IB packet vs standard IB transport
*/
#define IPATH_KD_QP 0x656b79
/*
* valid states passed to ipath_set_linkstate() user call
*/
#define IPATH_IB_LINKDOWN 0
#define IPATH_IB_LINKARM 1
#define IPATH_IB_LINKACTIVE 2
#define IPATH_IB_LINKINIT 3
#define IPATH_IB_LINKDOWN_SLEEP 4
#define IPATH_IB_LINKDOWN_DISABLE 5
#define IPATH_IB_LINK_LOOPBACK 6 /* enable local loopback */
#define IPATH_IB_LINK_EXTERNAL 7 /* normal, disable local loopback */
/*
* stats maintained by the driver. For now, at least, this is global
* to all minor devices.
*/
struct infinipath_stats {
/* number of interrupts taken */
__u64 sps_ints;
/* number of interrupts for errors */
__u64 sps_errints;
/* number of errors from chip (not incl. packet errors or CRC) */
__u64 sps_errs;
/* number of packet errors from chip other than CRC */
__u64 sps_pkterrs;
/* number of packets with CRC errors (ICRC and VCRC) */
__u64 sps_crcerrs;
/* number of hardware errors reported (parity, etc.) */
__u64 sps_hwerrs;
/* number of times IB link changed state unexpectedly */
__u64 sps_iblink;
__u64 sps_unused; /* was fastrcvint, no longer implemented */
/* number of kernel (port0) packets received */
__u64 sps_port0pkts;
/* number of "ethernet" packets sent by driver */
__u64 sps_ether_spkts;
/* number of "ethernet" packets received by driver */
__u64 sps_ether_rpkts;
/* number of SMA packets sent by driver. Obsolete. */
__u64 sps_sma_spkts;
/* number of SMA packets received by driver. Obsolete. */
__u64 sps_sma_rpkts;
/* number of times all ports rcvhdrq was full and packet dropped */
__u64 sps_hdrqfull;
/* number of times all ports egrtid was full and packet dropped */
__u64 sps_etidfull;
/*
* number of times we tried to send from driver, but no pio buffers
* avail
*/
__u64 sps_nopiobufs;
/* number of ports currently open */
__u64 sps_ports;
/* list of pkeys (other than default) accepted (0 means not set) */
__u16 sps_pkeys[4];
__u16 sps_unused16[4]; /* available; maintaining compatible layout */
/* number of user ports per chip (not IB ports) */
__u32 sps_nports;
/* not our interrupt, or already handled */
__u32 sps_nullintr;
/* max number of packets handled per receive call */
__u32 sps_maxpkts_call;
/* avg number of packets handled per receive call */
__u32 sps_avgpkts_call;
/* total number of pages locked */
__u64 sps_pagelocks;
/* total number of pages unlocked */
__u64 sps_pageunlocks;
/*
* Number of packets dropped in kernel other than errors (ether
* packets if ipath not configured, etc.)
*/
__u64 sps_krdrops;
__u64 sps_txeparity; /* PIO buffer parity error, recovered */
/* pad for future growth */
__u64 __sps_pad[45];
};
/*
* These are the status bits readable (in ascii form, 64bit value)
* from the "status" sysfs file.
*/
#define IPATH_STATUS_INITTED 0x1 /* basic initialization done */
#define IPATH_STATUS_DISABLED 0x2 /* hardware disabled */
/* Device has been disabled via admin request */
#define IPATH_STATUS_ADMIN_DISABLED 0x4
/* Chip has been found and initted */
#define IPATH_STATUS_CHIP_PRESENT 0x20
/* IB link is at ACTIVE, usable for data traffic */
#define IPATH_STATUS_IB_READY 0x40
/* link is configured, LID, MTU, etc. have been set */
#define IPATH_STATUS_IB_CONF 0x80
/* no link established, probably no cable */
#define IPATH_STATUS_IB_NOCABLE 0x100
/* A Fatal hardware error has occurred. */
#define IPATH_STATUS_HWERROR 0x200
/*
* The list of usermode accessible registers. Also see Reg_* later in file.
*/
typedef enum _ipath_ureg {
/* (RO) DMA RcvHdr to be used next. */
ur_rcvhdrtail = 0,
/* (RW) RcvHdr entry to be processed next by host. */
ur_rcvhdrhead = 1,
/* (RO) Index of next Eager index to use. */
ur_rcvegrindextail = 2,
/* (RW) Eager TID to be processed next */
ur_rcvegrindexhead = 3,
/* For internal use only; max register number. */
_IPATH_UregMax
} ipath_ureg;
/* bit values for spi_runtime_flags */
#define IPATH_RUNTIME_HT 0x1
#define IPATH_RUNTIME_PCIE 0x2
#define IPATH_RUNTIME_FORCE_WC_ORDER 0x4
#define IPATH_RUNTIME_RCVHDR_COPY 0x8
#define IPATH_RUNTIME_MASTER 0x10
/* 0x20 and 0x40 are no longer used, but are reserved for ABI compatibility */
/*
* This structure is returned by ipath_userinit() immediately after
* open to get implementation-specific info, and info specific to this
* instance.
*
* This struct must have explict pad fields where type sizes
* may result in different alignments between 32 and 64 bit
* programs, since the 64 bit * bit kernel requires the user code
* to have matching offsets
*/
struct ipath_base_info {
/* version of hardware, for feature checking. */
__u32 spi_hw_version;
/* version of software, for feature checking. */
__u32 spi_sw_version;
/* InfiniPath port assigned, goes into sent packets */
__u16 spi_port;
__u16 spi_subport;
/*
* IB MTU, packets IB data must be less than this.
* The MTU is in bytes, and will be a multiple of 4 bytes.
*/
__u32 spi_mtu;
/*
* Size of a PIO buffer. Any given packet's total size must be less
* than this (in words). Included is the starting control word, so
* if 513 is returned, then total pkt size is 512 words or less.
*/
__u32 spi_piosize;
/* size of the TID cache in infinipath, in entries */
__u32 spi_tidcnt;
/* size of the TID Eager list in infinipath, in entries */
__u32 spi_tidegrcnt;
/* size of a single receive header queue entry in words. */
__u32 spi_rcvhdrent_size;
/*
* Count of receive header queue entries allocated.
* This may be less than the spu_rcvhdrcnt passed in!.
*/
__u32 spi_rcvhdr_cnt;
/* per-chip and other runtime features bitmap (IPATH_RUNTIME_*) */
__u32 spi_runtime_flags;
/* address where receive buffer queue is mapped into */
__u64 spi_rcvhdr_base;
/* user program. */
/* base address of eager TID receive buffers. */
__u64 spi_rcv_egrbufs;
/* Allocated by initialization code, not by protocol. */
/*
* Size of each TID buffer in host memory, starting at
* spi_rcv_egrbufs. The buffers are virtually contiguous.
*/
__u32 spi_rcv_egrbufsize;
/*
* The special QP (queue pair) value that identifies an infinipath
* protocol packet from standard IB packets. More, probably much
* more, to be added.
*/
__u32 spi_qpair;
/*
* User register base for init code, not to be used directly by
* protocol or applications.
*/
__u64 __spi_uregbase;
/*
* Maximum buffer size in bytes that can be used in a single TID
* entry (assuming the buffer is aligned to this boundary). This is
* the minimum of what the hardware and software support Guaranteed
* to be a power of 2.
*/
__u32 spi_tid_maxsize;
/*
* alignment of each pio send buffer (byte count
* to add to spi_piobufbase to get to second buffer)
*/
__u32 spi_pioalign;
/*
* The index of the first pio buffer available to this process;
* needed to do lookup in spi_pioavailaddr; not added to
* spi_piobufbase.
*/
__u32 spi_pioindex;
/* number of buffers mapped for this process */
__u32 spi_piocnt;
/*
* Base address of writeonly pio buffers for this process.
* Each buffer has spi_piosize words, and is aligned on spi_pioalign
* boundaries. spi_piocnt buffers are mapped from this address
*/
__u64 spi_piobufbase;
/*
* Base address of readonly memory copy of the pioavail registers.
* There are 2 bits for each buffer.
*/
__u64 spi_pioavailaddr;
/*
* Address where driver updates a copy of the interface and driver
* status (IPATH_STATUS_*) as a 64 bit value. It's followed by a
* string indicating hardware error, if there was one.
*/
__u64 spi_status;
/* number of chip ports available to user processes */
__u32 spi_nports;
/* unit number of chip we are using */
__u32 spi_unit;
/* num bufs in each contiguous set */
__u32 spi_rcv_egrperchunk;
/* size in bytes of each contiguous set */
__u32 spi_rcv_egrchunksize;
/* total size of mmap to cover full rcvegrbuffers */
__u32 spi_rcv_egrbuftotlen;
__u32 spi_filler_for_align;
/* address of readonly memory copy of the rcvhdrq tail register. */
__u64 spi_rcvhdr_tailaddr;
/* shared memory pages for subports if port is shared */
__u64 spi_subport_uregbase;
__u64 spi_subport_rcvegrbuf;
__u64 spi_subport_rcvhdr_base;
/* shared memory page for hardware port if it is shared */
__u64 spi_port_uregbase;
__u64 spi_port_rcvegrbuf;
__u64 spi_port_rcvhdr_base;
__u64 spi_port_rcvhdr_tailaddr;
} __attribute__ ((aligned(8)));
/*
* This version number is given to the driver by the user code during
* initialization in the spu_userversion field of ipath_user_info, so
* the driver can check for compatibility with user code.
*
* The major version changes when data structures
* change in an incompatible way. The driver must be the same or higher
* for initialization to succeed. In some cases, a higher version
* driver will not interoperate with older software, and initialization
* will return an error.
*/
#define IPATH_USER_SWMAJOR 1
/*
* Minor version differences are always compatible
* a within a major version, however if user software is larger
* than driver software, some new features and/or structure fields
* may not be implemented; the user code must deal with this if it
* cares, or it must abort after initialization reports the difference.
*/
#define IPATH_USER_SWMINOR 5
#define IPATH_USER_SWVERSION ((IPATH_USER_SWMAJOR<<16) | IPATH_USER_SWMINOR)
#define IPATH_KERN_TYPE 0
/*
* Similarly, this is the kernel version going back to the user. It's
* slightly different, in that we want to tell if the driver was built as
* part of a QLogic release, or from the driver from openfabrics.org,
* kernel.org, or a standard distribution, for support reasons.
* The high bit is 0 for non-QLogic and 1 for QLogic-built/supplied.
*
* It's returned by the driver to the user code during initialization in the
* spi_sw_version field of ipath_base_info, so the user code can in turn
* check for compatibility with the kernel.
*/
#define IPATH_KERN_SWVERSION ((IPATH_KERN_TYPE<<31) | IPATH_USER_SWVERSION)
/*
* This structure is passed to ipath_userinit() to tell the driver where
* user code buffers are, sizes, etc. The offsets and sizes of the
* fields must remain unchanged, for binary compatibility. It can
* be extended, if userversion is changed so user code can tell, if needed
*/
struct ipath_user_info {
/*
* version of user software, to detect compatibility issues.
* Should be set to IPATH_USER_SWVERSION.
*/
__u32 spu_userversion;
/* desired number of receive header queue entries */
__u32 spu_rcvhdrcnt;
/* size of struct base_info to write to */
__u32 spu_base_info_size;
/*
* number of words in KD protocol header
* This tells InfiniPath how many words to copy to rcvhdrq. If 0,
* kernel uses a default. Once set, attempts to set any other value
* are an error (EAGAIN) until driver is reloaded.
*/
__u32 spu_rcvhdrsize;
/*
* If two or more processes wish to share a port, each process
* must set the spu_subport_cnt and spu_subport_id to the same
* values. The only restriction on the spu_subport_id is that
* it be unique for a given node.
*/
__u16 spu_subport_cnt;
__u16 spu_subport_id;
__u32 spu_unused; /* kept for compatible layout */
/*
* address of struct base_info to write to
*/
__u64 spu_base_info;
} __attribute__ ((aligned(8)));
/* User commands. */
#define IPATH_CMD_MIN 16
#define __IPATH_CMD_USER_INIT 16 /* old set up userspace (for old user code) */
#define IPATH_CMD_PORT_INFO 17 /* find out what resources we got */
#define IPATH_CMD_RECV_CTRL 18 /* control receipt of packets */
#define IPATH_CMD_TID_UPDATE 19 /* update expected TID entries */
#define IPATH_CMD_TID_FREE 20 /* free expected TID entries */
#define IPATH_CMD_SET_PART_KEY 21 /* add partition key */
#define __IPATH_CMD_SLAVE_INFO 22 /* return info on slave processes (for old user code) */
#define IPATH_CMD_ASSIGN_PORT 23 /* allocate HCA and port */
#define IPATH_CMD_USER_INIT 24 /* set up userspace */
#define IPATH_CMD_UNUSED_1 25
#define IPATH_CMD_UNUSED_2 26
#define IPATH_CMD_PIOAVAILUPD 27 /* force an update of PIOAvail reg */
#define IPATH_CMD_POLL_TYPE 28 /* set the kind of polling we want */
#define IPATH_CMD_MAX 28
/*
* Poll types
*/
#define IPATH_POLL_TYPE_URGENT 0x01
#define IPATH_POLL_TYPE_OVERFLOW 0x02
struct ipath_port_info {
__u32 num_active; /* number of active units */
__u32 unit; /* unit (chip) assigned to caller */
__u16 port; /* port on unit assigned to caller */
__u16 subport; /* subport on unit assigned to caller */
__u16 num_ports; /* number of ports available on unit */
__u16 num_subports; /* number of subports opened on port */
};
struct ipath_tid_info {
__u32 tidcnt;
/* make structure same size in 32 and 64 bit */
__u32 tid__unused;
/* virtual address of first page in transfer */
__u64 tidvaddr;
/* pointer (same size 32/64 bit) to __u16 tid array */
__u64 tidlist;
/*
* pointer (same size 32/64 bit) to bitmap of TIDs used
* for this call; checked for being large enough at open
*/
__u64 tidmap;
};
struct ipath_cmd {
__u32 type; /* command type */
union {
struct ipath_tid_info tid_info;
struct ipath_user_info user_info;
/* address in userspace of struct ipath_port_info to
write result to */
__u64 port_info;
/* enable/disable receipt of packets */
__u32 recv_ctrl;
/* partition key to set */
__u16 part_key;
/* user address of __u32 bitmask of active slaves */
__u64 slave_mask_addr;
/* type of polling we want */
__u16 poll_type;
} cmd;
};
struct ipath_iovec {
/* Pointer to data, but same size 32 and 64 bit */
__u64 iov_base;
/*
* Length of data; don't need 64 bits, but want
* ipath_sendpkt to remain same size as before 32 bit changes, so...
*/
__u64 iov_len;
};
/*
* Describes a single packet for send. Each packet can have one or more
* buffers, but the total length (exclusive of IB headers) must be less
* than the MTU, and if using the PIO method, entire packet length,
* including IB headers, must be less than the ipath_piosize value (words).
* Use of this necessitates including sys/uio.h
*/
struct __ipath_sendpkt {
__u32 sps_flags; /* flags for packet (TBD) */
__u32 sps_cnt; /* number of entries to use in sps_iov */
/* array of iov's describing packet. TEMPORARY */
struct ipath_iovec sps_iov[4];
};
/*
* diagnostics can send a packet by "writing" one of the following
* two structs to diag data special file
* The first is the legacy version for backward compatibility
*/
struct ipath_diag_pkt {
__u32 unit;
__u64 data;
__u32 len;
};
/* The second diag_pkt struct is the expanded version that allows
* more control over the packet, specifically, by allowing a custom
* pbc (+ extra) qword, so that special modes and deliberate
* changes to CRCs can be used. The elements were also re-ordered
* for better alignment and to avoid padding issues.
*/
struct ipath_diag_xpkt {
__u64 data;
__u64 pbc_wd;
__u32 unit;
__u32 len;
};
/*
* Data layout in I2C flash (for GUID, etc.)
* All fields are little-endian binary unless otherwise stated
*/
#define IPATH_FLASH_VERSION 2
struct ipath_flash {
/* flash layout version (IPATH_FLASH_VERSION) */
__u8 if_fversion;
/* checksum protecting if_length bytes */
__u8 if_csum;
/*
* valid length (in use, protected by if_csum), including
* if_fversion and if_csum themselves)
*/
__u8 if_length;
/* the GUID, in network order */
__u8 if_guid[8];
/* number of GUIDs to use, starting from if_guid */
__u8 if_numguid;
/* the (last 10 characters of) board serial number, in ASCII */
char if_serial[12];
/* board mfg date (YYYYMMDD ASCII) */
char if_mfgdate[8];
/* last board rework/test date (YYYYMMDD ASCII) */
char if_testdate[8];
/* logging of error counts, TBD */
__u8 if_errcntp[4];
/* powered on hours, updated at driver unload */
__u8 if_powerhour[2];
/* ASCII free-form comment field */
char if_comment[32];
/* Backwards compatible prefix for longer QLogic Serial Numbers */
char if_sprefix[4];
/* 82 bytes used, min flash size is 128 bytes */
__u8 if_future[46];
};
/*
* These are the counters implemented in the chip, and are listed in order.
* The InterCaps naming is taken straight from the chip spec.
*/
struct infinipath_counters {
__u64 LBIntCnt;
__u64 LBFlowStallCnt;
__u64 Reserved1;
__u64 TxUnsupVLErrCnt;
__u64 TxDataPktCnt;
__u64 TxFlowPktCnt;
__u64 TxDwordCnt;
__u64 TxLenErrCnt;
__u64 TxMaxMinLenErrCnt;
__u64 TxUnderrunCnt;
__u64 TxFlowStallCnt;
__u64 TxDroppedPktCnt;
__u64 RxDroppedPktCnt;
__u64 RxDataPktCnt;
__u64 RxFlowPktCnt;
__u64 RxDwordCnt;
__u64 RxLenErrCnt;
__u64 RxMaxMinLenErrCnt;
__u64 RxICRCErrCnt;
__u64 RxVCRCErrCnt;
__u64 RxFlowCtrlErrCnt;
__u64 RxBadFormatCnt;
__u64 RxLinkProblemCnt;
__u64 RxEBPCnt;
__u64 RxLPCRCErrCnt;
__u64 RxBufOvflCnt;
__u64 RxTIDFullErrCnt;
__u64 RxTIDValidErrCnt;
__u64 RxPKeyMismatchCnt;
__u64 RxP0HdrEgrOvflCnt;
__u64 RxP1HdrEgrOvflCnt;
__u64 RxP2HdrEgrOvflCnt;
__u64 RxP3HdrEgrOvflCnt;
__u64 RxP4HdrEgrOvflCnt;
__u64 RxP5HdrEgrOvflCnt;
__u64 RxP6HdrEgrOvflCnt;
__u64 RxP7HdrEgrOvflCnt;
__u64 RxP8HdrEgrOvflCnt;
__u64 Reserved6;
__u64 Reserved7;
__u64 IBStatusChangeCnt;
__u64 IBLinkErrRecoveryCnt;
__u64 IBLinkDownedCnt;
__u64 IBSymbolErrCnt;
};
/*
* The next set of defines are for packet headers, and chip register
* and memory bits that are visible to and/or used by user-mode software
* The other bits that are used only by the driver or diags are in
* ipath_registers.h
*/
/* RcvHdrFlags bits */
#define INFINIPATH_RHF_LENGTH_MASK 0x7FF
#define INFINIPATH_RHF_LENGTH_SHIFT 0
#define INFINIPATH_RHF_RCVTYPE_MASK 0x7
#define INFINIPATH_RHF_RCVTYPE_SHIFT 11
#define INFINIPATH_RHF_EGRINDEX_MASK 0x7FF
#define INFINIPATH_RHF_EGRINDEX_SHIFT 16
#define INFINIPATH_RHF_H_ICRCERR 0x80000000
#define INFINIPATH_RHF_H_VCRCERR 0x40000000
#define INFINIPATH_RHF_H_PARITYERR 0x20000000
#define INFINIPATH_RHF_H_LENERR 0x10000000
#define INFINIPATH_RHF_H_MTUERR 0x08000000
#define INFINIPATH_RHF_H_IHDRERR 0x04000000
#define INFINIPATH_RHF_H_TIDERR 0x02000000
#define INFINIPATH_RHF_H_MKERR 0x01000000
#define INFINIPATH_RHF_H_IBERR 0x00800000
#define INFINIPATH_RHF_L_SWA 0x00008000
#define INFINIPATH_RHF_L_SWB 0x00004000
/* infinipath header fields */
#define INFINIPATH_I_VERS_MASK 0xF
#define INFINIPATH_I_VERS_SHIFT 28
#define INFINIPATH_I_PORT_MASK 0xF
#define INFINIPATH_I_PORT_SHIFT 24
#define INFINIPATH_I_TID_MASK 0x7FF
#define INFINIPATH_I_TID_SHIFT 13
#define INFINIPATH_I_OFFSET_MASK 0x1FFF
#define INFINIPATH_I_OFFSET_SHIFT 0
/* K_PktFlags bits */
#define INFINIPATH_KPF_INTR 0x1
#define INFINIPATH_KPF_SUBPORT_MASK 0x3
#define INFINIPATH_KPF_SUBPORT_SHIFT 1
#define INFINIPATH_MAX_SUBPORT 4
/* SendPIO per-buffer control */
#define INFINIPATH_SP_TEST 0x40
#define INFINIPATH_SP_TESTEBP 0x20
/* SendPIOAvail bits */
#define INFINIPATH_SENDPIOAVAIL_BUSY_SHIFT 1
#define INFINIPATH_SENDPIOAVAIL_CHECK_SHIFT 0
/* infinipath header format */
struct ipath_header {
/*
* Version - 4 bits, Port - 4 bits, TID - 10 bits and Offset -
* 14 bits before ECO change ~28 Dec 03. After that, Vers 4,
* Port 4, TID 11, offset 13.
*/
__le32 ver_port_tid_offset;
__le16 chksum;
__le16 pkt_flags;
};
/* infinipath user message header format.
* This structure contains the first 4 fields common to all protocols
* that employ infinipath.
*/
struct ipath_message_header {
__be16 lrh[4];
__be32 bth[3];
/* fields below this point are in host byte order */
struct ipath_header iph;
__u8 sub_opcode;
};
/* infinipath ethernet header format */
struct ether_header {
__be16 lrh[4];
__be32 bth[3];
struct ipath_header iph;
__u8 sub_opcode;
__u8 cmd;
__be16 lid;
__u16 mac[3];
__u8 frag_num;
__u8 seq_num;
__le32 len;
/* MUST be of word size due to PIO write requirements */
__le32 csum;
__le16 csum_offset;
__le16 flags;
__u16 first_2_bytes;
__u8 unused[2]; /* currently unused */
};
/* IB - LRH header consts */
#define IPATH_LRH_GRH 0x0003 /* 1. word of IB LRH - next header: GRH */
#define IPATH_LRH_BTH 0x0002 /* 1. word of IB LRH - next header: BTH */
/* misc. */
#define SIZE_OF_CRC 1
#define IPATH_DEFAULT_P_KEY 0xFFFF
#define IPATH_PERMISSIVE_LID 0xFFFF
#define IPATH_AETH_CREDIT_SHIFT 24
#define IPATH_AETH_CREDIT_MASK 0x1F
#define IPATH_AETH_CREDIT_INVAL 0x1F
#define IPATH_PSN_MASK 0xFFFFFF
#define IPATH_MSN_MASK 0xFFFFFF
#define IPATH_QPN_MASK 0xFFFFFF
#define IPATH_MULTICAST_LID_BASE 0xC000
#define IPATH_MULTICAST_QPN 0xFFFFFF
/* Receive Header Queue: receive type (from infinipath) */
#define RCVHQ_RCV_TYPE_EXPECTED 0
#define RCVHQ_RCV_TYPE_EAGER 1
#define RCVHQ_RCV_TYPE_NON_KD 2
#define RCVHQ_RCV_TYPE_ERROR 3
/* sub OpCodes - ith4x */
#define IPATH_ITH4X_OPCODE_ENCAP 0x81
#define IPATH_ITH4X_OPCODE_LID_ARP 0x82
#define IPATH_HEADER_QUEUE_WORDS 9
/* functions for extracting fields from rcvhdrq entries for the driver.
*/
static inline __u32 ipath_hdrget_err_flags(const __le32 * rbuf)
{
return __le32_to_cpu(rbuf[1]);
}
static inline __u32 ipath_hdrget_rcv_type(const __le32 * rbuf)
{
return (__le32_to_cpu(rbuf[0]) >> INFINIPATH_RHF_RCVTYPE_SHIFT)
& INFINIPATH_RHF_RCVTYPE_MASK;
}
static inline __u32 ipath_hdrget_length_in_bytes(const __le32 * rbuf)
{
return ((__le32_to_cpu(rbuf[0]) >> INFINIPATH_RHF_LENGTH_SHIFT)
& INFINIPATH_RHF_LENGTH_MASK) << 2;
}
static inline __u32 ipath_hdrget_index(const __le32 * rbuf)
{
return (__le32_to_cpu(rbuf[0]) >> INFINIPATH_RHF_EGRINDEX_SHIFT)
& INFINIPATH_RHF_EGRINDEX_MASK;
}
static inline __u32 ipath_hdrget_ipath_ver(__le32 hdrword)
{
return (__le32_to_cpu(hdrword) >> INFINIPATH_I_VERS_SHIFT)
& INFINIPATH_I_VERS_MASK;
}
#endif /* _IPATH_COMMON_H */
Reference in New Issue View Git Blame Copy Permalink