lk/linux-kernel-test
1
0
Fork 0
Code Issues Pull Requests Releases Wiki Activity
5026391c2a
linux-kernel-test/arch/arm/mach-omap2
History
Santosh Shilimkar 5026391c2a omap4: mmc: Fix the regulator resource for MMC2 on 4430sdp 
The MMC1 and MMC2 cards have seperate LDO supplies. Current code assumes
that they are powered by same LDO.

This patch fixes the same and has VAUX1 as supply to MMC2 card.

Signed-off-by: Rajendra Nayak <rnayak@ti.com>
Signed-off-by: Sukumar Ghorai <s-ghorai@ti.com>
Signed-off-by: Kishore Kadiyala <kishore.kadiyala@ti.com>
Tested-by: Kishore Kadiyala <kishore.kadiyala@ti.com>
Signed-off-by: Santosh Shilimkar <santosh.shilimkar@ti.com>
Signed-off-by: Tony Lindgren <tony@atomide.com>
2010-08-02 13:18:03 +03:00
..
include/mach omap4: Move SOC specific code from board file 2010-05-20 11:17:51 -07:00
board-2430sdp.c omap: mux: Mux 2430 USB0HS_STP in board-2430.c 2010-07-05 16:31:39 +03:00
board-3430sdp.c arm: omap: switch over to gpio_set_debounce 2010-05-27 09:12:42 -07:00
board-3630sdp.c omap: mux: Remove old mux code 2010-07-05 16:31:40 +03:00
board-4430sdp.c omap4: mmc: Fix the regulator resource for MMC2 on 4430sdp 2010-08-02 13:18:03 +03:00
board-am3517evm.c AM3517: rename the i2c boardinfo to make it more readable 2010-05-20 11:18:29 -07:00
board-apollon.c omap: mux: Convert 2420 platform init code to use new mux code 2010-07-05 16:31:40 +03:00
board-cm-t35.c omap3: Fix compile for board-cm-t35 2010-05-04 13:19:16 -07:00
board-devkit8000.c OMAP2: Devkit8000: Fix regulator for power supply 2010-07-05 17:04:42 +03:00
board-generic.c omap: mux: Remove old mux code 2010-07-05 16:31:40 +03:00
board-h4.c Removing dead MACH_OMAP2_H4_USB1 2010-07-05 17:03:59 +03:00
board-igep0020.c omap3: Fix EHCI port for IGEP v2 board 2010-04-23 15:35:11 -07:00
board-ldp.c arm: omap: switch over to gpio_set_debounce 2010-05-27 09:12:42 -07:00
board-n8x0.c omap: mux: Select POP package for N8X0 2010-07-05 16:31:38 +03:00
board-omap3beagle.c board-omap3-beagle: add DSS2 support 2010-05-18 15:06:07 +03:00
board-omap3evm.c arm: omap: switch over to gpio_set_debounce 2010-05-27 09:12:42 -07:00
board-omap3pandora.c omap3: pandora: add NAND and wifi support 2010-08-02 13:18:01 +03:00
board-omap3stalker.c omap: Stalker board: switch over to gpio_set_debounce 2010-06-09 13:53:05 +03:00
board-omap3touchbook.c arm: omap: switch over to gpio_set_debounce 2010-05-27 09:12:42 -07:00
board-overo.c omap: Overo: Add support for second ethernet port 2010-05-20 10:53:55 -07:00
board-rx51-peripherals.c omap: tsl2563 ALS support for Nokia N900 2010-08-02 13:18:03 +03:00
board-rx51-sdram.c omap3: rx51: Add SDRAM init 2009-11-22 10:24:33 -08:00
board-rx51-video.c omap: mux: Remove old mux code 2010-07-05 16:31:40 +03:00
board-rx51.c OMAP: RX51: Add LCD Panel support 2010-05-18 15:06:02 +03:00
board-sdp-flash.c omap: board-sdp-flash.c: Fix typos in debug output 2010-04-23 15:37:24 -07:00
board-zoom2.c omap: zoom2: wlan board muxing 2010-08-02 13:18:00 +03:00
board-zoom3.c omap: zoom3: wlan board muxing 2010-08-02 13:18:00 +03:00
board-zoom-debugboard.c omap2/3: Fix DEBUG_LL for omap zoom2/3 2010-05-03 17:53:08 -07:00
board-zoom-peripherals.c omap3: zoom2/3 / 3630sdp: Don't init always all uarts 2010-03-15 16:34:17 -05:00
clkt2xxx_apll.c OMAP2 PRCM: convert OMAP2 PRCM macros to the _SHIFT/_MASK suffixes 2010-05-20 12:31:04 -06:00
clkt2xxx_dpllcore.c OMAP2xxx clock: move the DPLL+CORE composite clock code into mach-omap2/clkt2xxx_dpllcore.c 2010-01-26 20:13:06 -07:00
clkt2xxx_osc.c OMAP2xxx clock: move osc_clk code into mach-omap2/clkt2xxx_osc.c 2010-01-28 18:13:49 -07:00
clkt2xxx_sys.c OMAP2xxx clock: move sys_clk code into mach-omap2/clkt2xxx_sys.c 2010-01-28 18:13:49 -07:00
clkt2xxx_virt_prcm_set.c OMAP2 clock: fix recursive spinlock attempt when CONFIG_CPU_FREQ=y 2010-05-20 12:31:14 -06:00
clkt34xx_dpll3m2.c OMAP3/4 clock: split into per-chip family files 2010-02-24 12:16:15 -07:00
clkt_clksel.c OMAP2+ clock: clean up clkt_clksel.c 2010-05-20 12:31:06 -06:00
clkt_dpll.c OMAP2/3/4 clock: fix DPLL multiplier value errors; also copyrights, includes, documentation 2010-02-24 12:15:03 -07:00
clock2xxx.c OMAP2/3 clock: combine OMAP2 & 3 boot-time MPU rate change code 2010-02-24 17:45:15 -07:00
clock2xxx.h OMAP2 clock: split OMAP2420, OMAP2430 clock data into their own files 2010-02-24 12:29:42 -07:00
clock3xxx_data.c Merge git://git.kernel.org/pub/scm/linux/kernel/git/herbert/crypto-2.6 2010-05-21 14:46:51 -07:00
clock3xxx.c OMAP2/3 clock: combine OMAP2 & 3 boot-time MPU rate change code 2010-02-24 17:45:15 -07:00
clock3xxx.h OMAP3/4 clock: split into per-chip family files 2010-02-24 12:16:15 -07:00
clock34xx.c OMAP3/4 clock: split into per-chip family files 2010-02-24 12:16:15 -07:00
clock34xx.h OMAP3/4 clock: split into per-chip family files 2010-02-24 12:16:15 -07:00
clock36xx.c OMAP3/4 clock: split into per-chip family files 2010-02-24 12:16:15 -07:00
clock36xx.h OMAP3/4 clock: split into per-chip family files 2010-02-24 12:16:15 -07:00
clock44xx_data.c OMAP4: clock: Fix multi-omap boot with reset un-used clocks 2010-06-16 19:01:33 +03:00
clock44xx.h OMAP3/4 clock: split into per-chip family files 2010-02-24 12:16:15 -07:00
clock2420_data.c Merge git://git.kernel.org/pub/scm/linux/kernel/git/herbert/crypto-2.6 2010-05-21 14:46:51 -07:00
clock2430_data.c Merge git://git.kernel.org/pub/scm/linux/kernel/git/herbert/crypto-2.6 2010-05-21 14:46:51 -07:00
clock2430.c OMAP2 clock: split OMAP2420, OMAP2430 clock data into their own files 2010-02-24 12:29:42 -07:00
clock3517.c OMAP3/4 clock: split into per-chip family files 2010-02-24 12:16:15 -07:00
clock3517.h OMAP3/4 clock: split into per-chip family files 2010-02-24 12:16:15 -07:00
clock_common_data.c OMAP3 clock: rename RATE_IN_343X, RATE_IN_3430ES2 to match reality 2010-05-20 12:31:07 -06:00
clock.c OMAP2+ clock: clean up clkt_clksel.c 2010-05-20 12:31:06 -06:00
clock.h OMAP2+ clock: clean up clkt_clksel.c 2010-05-20 12:31:06 -06:00
clockdomain.c OMAP2 PRCM: convert OMAP2 PRCM macros to the _SHIFT/_MASK suffixes 2010-05-20 12:31:04 -06:00
clockdomains44xx.h OMAP4: PRM: Remove MPU internal code name and apply PRCM naming convention 2010-05-20 12:31:11 -06:00
clockdomains.h omap2: Convert ARCH_OMAP24XX to ARCH_OMAP2 2010-02-15 09:27:01 -08:00
cm4xxx.c OMAP4: hwmod & CM: Implement the omap4_cm_wait_module_ready function 2010-05-20 12:31:08 -06:00
cm44xx.h OMAP4: PRCM: Add offset defines for all CM registers 2010-05-20 12:31:12 -06:00
cm-regbits-24xx.h OMAP2 PRCM: convert OMAP2 PRCM macros to the _SHIFT/_MASK suffixes 2010-05-20 12:31:04 -06:00
cm-regbits-34xx.h OMAP3 PRCM: convert OMAP3 PRCM macros to the _SHIFT/_MASK suffixes 2010-05-20 12:31:05 -06:00
cm-regbits-44xx.h OMAP4: PRCM: Define shift macros as n instead of 1 << n 2010-01-29 10:14:22 -07:00
cm.c OMAP: CM: Move MAX_MODULE_READY_TIME to cm.h 2010-05-20 12:31:08 -06:00
cm.h OMAP4: hwmod & CM: Implement the omap4_cm_wait_module_ready function 2010-05-20 12:31:08 -06:00
control.c OMAP3 PRCM: convert OMAP3 PRCM macros to the _SHIFT/_MASK suffixes 2010-05-20 12:31:05 -06:00
cpuidle34xx.c OMAP3: cpuidle: Add valid field into C-state parameter passing 2010-02-23 11:05:02 -08:00
devices.c Removing dead OMAP_STI 2010-07-05 17:03:58 +03:00
dpll3xxx.c OMAP2/3/4 clock: fix DPLL multiplier value errors; also copyrights, includes, documentation 2010-02-24 12:15:03 -07:00
emu.c omap2/3: Fix initcalls for multi-omap 2010-02-15 09:27:05 -08:00
gpmc-nand.c omap: fix a gpmc nand problem 2010-04-23 15:35:11 -07:00
gpmc-onenand.c omap: headers: Move remaining headers from include/mach to include/plat 2009-10-20 09:40:47 -07:00
gpmc-smc91x.c omap: use smc91x_platdata to setup smc91x 2009-12-11 16:16:33 -08:00
gpmc.c omap2/3/4: gpmc: kill compile warning 2010-02-15 10:03:33 -08:00
hsmmc.c omap4: Adding PBIAS Configuration for MMC1 Controller 2010-05-20 11:21:22 -07:00
hsmmc.h omap_hsmmc: Allow for a shared VccQ 2010-02-15 10:03:34 -08:00
i2c.c omap: mux: Convert 2420 platform init code to use new mux code 2010-07-05 16:31:40 +03:00
id.c Merge branch 'for_2.6.34_b' of git://git.pwsan.com/linux-2.6 into omap-for-linus 2010-02-24 20:53:03 -08:00
io.c omap: mux: Remove old mux code 2010-07-05 16:31:40 +03:00
iommu2.c omap iommu: move iommu_disable at fault to the above layer 2010-06-29 07:55:07 +03:00
irq.c OMAP2/3: IRQ: ensure valid base address 2010-02-03 08:48:06 -08:00
Kconfig omap2/3/4: Add Kconfig option to compile in typical omap features 2010-07-05 16:31:48 +03:00
mailbox.c omap2/3/4: mailbox: remove compiler warning 2010-03-11 14:50:00 -08:00
Makefile omap: mux: Add data for 2430 2010-07-05 16:31:36 +03:00
Makefile.boot
mcbsp.c omap: mux: Convert 2420 platform init code to use new mux code 2010-07-05 16:31:40 +03:00
mux34xx.c omap: mux: Remove unncessary parens from mux34xx.c 2010-07-05 16:31:36 +03:00
mux34xx.h omap: mux: Add 36xx CBP package support 2009-12-11 16:16:33 -08:00
mux2420.c omap: mux: Add data for 2420 2010-07-05 16:31:36 +03:00
mux2420.h omap: mux: Add data for 2420 2010-07-05 16:31:36 +03:00
mux2430.c omap: mux: Add data for 2430 2010-07-05 16:31:36 +03:00
mux2430.h omap: mux: Add data for 2430 2010-07-05 16:31:36 +03:00
mux.c omap: mux: Remove old mux code 2010-07-05 16:31:40 +03:00
mux.h omap: mux: Add data for 2430 2010-07-05 16:31:36 +03:00
omap4-common.c omap4: Move SOC specific code from board file 2010-05-20 11:17:51 -07:00
omap44xx-smc.S omap4: Fix build break when used with gcc-4.4.1 (2009-q3) 2010-04-23 15:35:11 -07:00
omap_hwmod_3xxx_data.c OMAP: hwmod: Rename hwmod name for the MPU 2010-05-20 12:31:10 -06:00
omap_hwmod_2420_data.c OMAP: hwmod: Rename hwmod name for the MPU 2010-05-20 12:31:10 -06:00
omap_hwmod_2430_data.c OMAP: hwmod: Rename hwmod name for the MPU 2010-05-20 12:31:10 -06:00
omap_hwmod_common_data.c OMAP hwmod: add hwmod class support 2010-02-24 17:45:14 -07:00
omap_hwmod_common_data.h OMAP hwmod: add hwmod class support 2010-02-24 17:45:14 -07:00
omap_hwmod.c OMAP: hwmod: Fix the missing braces 2010-06-23 18:15:12 -06:00
omap-headsmp.S omap4: Fix build break when used with gcc-4.4.1 (2009-q3) 2010-04-23 15:35:11 -07:00
omap-iommu.c omap iommu: update ducati mmu irq define name 2010-06-29 07:55:08 +03:00
omap-smp.c omap4: Move SOC specific code from board file 2010-05-20 11:17:51 -07:00
opp2xxx.h omap2/3: Multiboot compile fixes to compile in omap2 and omap3 2010-02-15 09:26:55 -08:00
opp2420_data.c OMAP2xxx OPP: clean up comments in OPP data 2010-01-08 15:23:15 -07:00
opp2430_data.c OMAP2xxx OPP: clean up comments in OPP data 2010-01-08 15:23:15 -07:00
pm24xx.c omap: mux: Remove old mux code 2010-07-05 16:31:40 +03:00
pm34xx.c OMAP3: PM: fix IO daisy chain enable to use PM_WKEN reg 2010-06-10 15:37:41 +03:00
pm-debug.c OMAP3: PM: Add milliseconds interface to suspend wakeup timer 2010-05-12 09:39:00 -07:00
pm.h OMAP3: PM: Add milliseconds interface to suspend wakeup timer 2010-05-12 09:39:00 -07:00
powerdomain.c OMAP powerdomain, hwmod, omap_device: add some credits 2010-05-20 12:31:14 -06:00
powerdomains24xx.h omap2: Convert ARCH_OMAP24XX to ARCH_OMAP2 2010-02-15 09:27:01 -08:00
powerdomains34xx.h OMAP3 PM: Defining .pwrsts_logic_ret field for core power domain structure 2010-02-24 12:05:50 -07:00
powerdomains44xx.h OMAP4 powerdomain: Support LOWPOWERSTATECHANGE for powerdomains 2010-05-20 12:31:13 -06:00
powerdomains.h OMAP2+ powerdomains/clockdomains: prepare for multi-OMAP configs 2010-01-29 10:14:23 -07:00
prcm-common.h OMAP4: PRCM: Remove duplicate definition of base addresses 2010-05-20 12:31:12 -06:00
prcm.c OMAP2+ PRCM: convert remaining PRCM macros to the _SHIFT/_MASK suffixes 2010-05-20 12:31:05 -06:00
prm44xx.h OMAP4: PRCM: Add offset defines for all PRM registers 2010-05-20 12:31:12 -06:00
prm-regbits-24xx.h OMAP2 PRCM: convert OMAP2 PRCM macros to the _SHIFT/_MASK suffixes 2010-05-20 12:31:04 -06:00
prm-regbits-34xx.h OMAP3 PRCM: convert OMAP3 PRCM macros to the _SHIFT/_MASK suffixes 2010-05-20 12:31:05 -06:00
prm-regbits-44xx.h OMAP4: PRCM: Define shift macros as n instead of 1 << n 2010-01-29 10:14:22 -07:00
prm.h OMAP4: PRM: Remove MPU internal code name and apply PRCM naming convention 2010-05-20 12:31:11 -06:00
sdram-hynix-h8mbx00u0mer-0em.h omap3: zoom: Introduce zoom3 board support 2009-11-22 10:24:33 -08:00
sdram-micron-mt46h32m32lf-6.h omap: headers: Move remaining headers from include/mach to include/plat 2009-10-20 09:40:47 -07:00
sdram-numonyx-m65kxxxxam.h omap3: SDRC: add timing data for Numonyx M65KxxxxAM 2010-02-17 17:23:20 -08:00
sdram-qimonda-hyb18m512160af-6.h omap: headers: Move remaining headers from include/mach to include/plat 2009-10-20 09:40:47 -07:00
sdrc2xxx.c omap: headers: Move remaining headers from include/mach to include/plat 2009-10-20 09:40:47 -07:00
sdrc.c omap2/3/4: ioremap omap_globals module 2010-02-23 10:57:40 -08:00
sdrc.h OMAP2 clock: convert clock24xx.h to clock2xxx_data.c, opp2xxx* 2009-12-11 16:16:00 -07:00
serial.c omap2/3/4: serial: Remove condition for getting uart4_phys 2010-03-15 16:34:16 -05:00
sleep24xx.S omap: headers: Move remaining headers from include/mach to include/plat 2009-10-20 09:40:47 -07:00
sleep34xx.S OMAP3: PM: Added support for L2 aux ctrl register save and restore 2010-02-23 11:05:07 -08:00
sram34xx.S OMAP3: SDRC: Place SDRC AC timing and MR changes in CORE DVFS SRAM code behind Kconfig 2009-12-11 17:00:42 -07:00
sram242x.S omap: Split OMAP2_IO_ADDRESS to L3 and L4 2009-10-19 15:25:31 -07:00
sram243x.S omap: Split OMAP2_IO_ADDRESS to L3 and L4 2009-10-19 15:25:31 -07:00
timer-gp.c OMAP4: clock: Remove clock hacks from timer-gp.c 2010-02-24 17:45:17 -07:00
timer-mpu.c omap4: Use irq line defines from irq-44xx.h 2010-02-23 15:29:08 -08:00
usb-ehci.c omap: mux: Remove old mux code 2010-07-05 16:31:40 +03:00
usb-fs.c omap: mux: Make omap2 FS USB code use new mux functions 2010-07-05 16:31:38 +03:00
usb-musb.c omap: mux: Remove old mux code 2010-07-05 16:31:40 +03:00
usb-tusb6010.c omap: mux: Convert 2420 platform init code to use new mux code 2010-07-05 16:31:40 +03:00