548cd3ab54
This patch adds code which enables Quad I/O mode on Micron SPI NOR flashes. For Micron SPI NOR flash, enabling or disabling quad I/O protocol can be done By two methods, which are to use EVCR (Enhanced Volatile Configuration Register) and the ENTER QUAD I/O MODE command. There is no difference between these two methods. Unfortunately, for some Micron SPI NOR flashes, there no ENTER Quad I/O command (35h), such as n25q064. But for all current Micron SPI NOR, if it support quad I/O mode, using EVCR definitely be supported. It is a recommended method to enable Quad I/O mode by EVCR, Quad I/O protocol bit 7. When EVCR bit 7 is reset to 0, the SPI NOR flash will operate in quad I/O mode. This patch has been tested on N25Q512A and MT25TL256BAA1ESF. Micron SPI NOR of spi_nor_ids[] table all support this method. Signed-off-by: Bean Huo <beanhuo@micron.com> Acked-by: Marek Vasut <marex@denx.de> Signed-off-by: Brian Norris <computersforpeace@gmail.com> |
||
---|---|---|
.. | ||
chips | ||
devices | ||
lpddr | ||
maps | ||
nand | ||
onenand | ||
spi-nor | ||
tests | ||
ubi | ||
afs.c | ||
ar7part.c | ||
bcm47xxpart.c | ||
bcm63xxpart.c | ||
cmdlinepart.c | ||
ftl.c | ||
inftlcore.c | ||
inftlmount.c | ||
Kconfig | ||
Makefile | ||
mtd_blkdevs.c | ||
mtdblock_ro.c | ||
mtdblock.c | ||
mtdchar.c | ||
mtdconcat.c | ||
mtdcore.c | ||
mtdcore.h | ||
mtdoops.c | ||
mtdpart.c | ||
mtdsuper.c | ||
mtdswap.c | ||
nftlcore.c | ||
nftlmount.c | ||
ofpart.c | ||
redboot.c | ||
rfd_ftl.c | ||
sm_ftl.c | ||
sm_ftl.h | ||
ssfdc.c |