b533f8ae79
Make the interrupt numbers match the OpenPIC spec intead of the Freescale docs which distinguish between internal and external interrupts. Now we can use the interrupt number directly to find the register offset associated with it. Signed-off-by: Kumar Gala <galak@kernel.crashing.org>
400 lines
9.1 KiB
Plaintext
400 lines
9.1 KiB
Plaintext
/*
|
|
* MPC8568E MDS Device Tree Source
|
|
*
|
|
* Copyright 2007 Freescale Semiconductor Inc.
|
|
*
|
|
* This program is free software; you can redistribute it and/or modify it
|
|
* under the terms of the GNU General Public License as published by the
|
|
* Free Software Foundation; either version 2 of the License, or (at your
|
|
* option) any later version.
|
|
*/
|
|
|
|
|
|
/*
|
|
/memreserve/ 00000000 1000000;
|
|
*/
|
|
|
|
/ {
|
|
model = "MPC8568EMDS";
|
|
compatible = "MPC8568EMDS", "MPC85xxMDS";
|
|
#address-cells = <1>;
|
|
#size-cells = <1>;
|
|
|
|
cpus {
|
|
#address-cells = <1>;
|
|
#size-cells = <0>;
|
|
|
|
PowerPC,8568@0 {
|
|
device_type = "cpu";
|
|
reg = <0>;
|
|
d-cache-line-size = <20>; // 32 bytes
|
|
i-cache-line-size = <20>; // 32 bytes
|
|
d-cache-size = <8000>; // L1, 32K
|
|
i-cache-size = <8000>; // L1, 32K
|
|
timebase-frequency = <0>;
|
|
bus-frequency = <0>;
|
|
clock-frequency = <0>;
|
|
32-bit;
|
|
};
|
|
};
|
|
|
|
memory {
|
|
device_type = "memory";
|
|
reg = <00000000 10000000>;
|
|
};
|
|
|
|
bcsr@f8000000 {
|
|
device_type = "board-control";
|
|
reg = <f8000000 8000>;
|
|
};
|
|
|
|
soc8568@e0000000 {
|
|
#address-cells = <1>;
|
|
#size-cells = <1>;
|
|
#interrupt-cells = <2>;
|
|
device_type = "soc";
|
|
ranges = <0 e0000000 00100000>;
|
|
reg = <e0000000 00100000>;
|
|
bus-frequency = <0>;
|
|
|
|
memory-controller@2000 {
|
|
compatible = "fsl,8568-memory-controller";
|
|
reg = <2000 1000>;
|
|
interrupt-parent = <&mpic>;
|
|
interrupts = <12 2>;
|
|
};
|
|
|
|
l2-cache-controller@20000 {
|
|
compatible = "fsl,8568-l2-cache-controller";
|
|
reg = <20000 1000>;
|
|
cache-line-size = <20>; // 32 bytes
|
|
cache-size = <80000>; // L2, 512K
|
|
interrupt-parent = <&mpic>;
|
|
interrupts = <10 2>;
|
|
};
|
|
|
|
i2c@3000 {
|
|
device_type = "i2c";
|
|
compatible = "fsl-i2c";
|
|
reg = <3000 100>;
|
|
interrupts = <2b 2>;
|
|
interrupt-parent = <&mpic>;
|
|
dfsrr;
|
|
};
|
|
|
|
i2c@3100 {
|
|
device_type = "i2c";
|
|
compatible = "fsl-i2c";
|
|
reg = <3100 100>;
|
|
interrupts = <2b 2>;
|
|
interrupt-parent = <&mpic>;
|
|
dfsrr;
|
|
};
|
|
|
|
mdio@24520 {
|
|
#address-cells = <1>;
|
|
#size-cells = <0>;
|
|
device_type = "mdio";
|
|
compatible = "gianfar";
|
|
reg = <24520 20>;
|
|
phy0: ethernet-phy@0 {
|
|
interrupt-parent = <&mpic>;
|
|
interrupts = <1 1>;
|
|
reg = <0>;
|
|
device_type = "ethernet-phy";
|
|
};
|
|
phy1: ethernet-phy@1 {
|
|
interrupt-parent = <&mpic>;
|
|
interrupts = <2 1>;
|
|
reg = <1>;
|
|
device_type = "ethernet-phy";
|
|
};
|
|
phy2: ethernet-phy@2 {
|
|
interrupt-parent = <&mpic>;
|
|
interrupts = <1 1>;
|
|
reg = <2>;
|
|
device_type = "ethernet-phy";
|
|
};
|
|
phy3: ethernet-phy@3 {
|
|
interrupt-parent = <&mpic>;
|
|
interrupts = <2 1>;
|
|
reg = <3>;
|
|
device_type = "ethernet-phy";
|
|
};
|
|
};
|
|
|
|
ethernet@24000 {
|
|
#address-cells = <1>;
|
|
#size-cells = <0>;
|
|
device_type = "network";
|
|
model = "eTSEC";
|
|
compatible = "gianfar";
|
|
reg = <24000 1000>;
|
|
/*
|
|
* mac-address is deprecated and will be removed
|
|
* in 2.6.25. Only recent versions of
|
|
* U-Boot support local-mac-address, however.
|
|
*/
|
|
mac-address = [ 00 00 00 00 00 00 ];
|
|
local-mac-address = [ 00 00 00 00 00 00 ];
|
|
interrupts = <1d 2 1e 2 22 2>;
|
|
interrupt-parent = <&mpic>;
|
|
phy-handle = <&phy2>;
|
|
};
|
|
|
|
ethernet@25000 {
|
|
#address-cells = <1>;
|
|
#size-cells = <0>;
|
|
device_type = "network";
|
|
model = "eTSEC";
|
|
compatible = "gianfar";
|
|
reg = <25000 1000>;
|
|
/*
|
|
* mac-address is deprecated and will be removed
|
|
* in 2.6.25. Only recent versions of
|
|
* U-Boot support local-mac-address, however.
|
|
*/
|
|
mac-address = [ 00 00 00 00 00 00 ];
|
|
local-mac-address = [ 00 00 00 00 00 00 ];
|
|
interrupts = <23 2 24 2 28 2>;
|
|
interrupt-parent = <&mpic>;
|
|
phy-handle = <&phy3>;
|
|
};
|
|
|
|
serial@4500 {
|
|
device_type = "serial";
|
|
compatible = "ns16550";
|
|
reg = <4500 100>;
|
|
clock-frequency = <0>;
|
|
interrupts = <2a 2>;
|
|
interrupt-parent = <&mpic>;
|
|
};
|
|
|
|
serial@4600 {
|
|
device_type = "serial";
|
|
compatible = "ns16550";
|
|
reg = <4600 100>;
|
|
clock-frequency = <0>;
|
|
interrupts = <2a 2>;
|
|
interrupt-parent = <&mpic>;
|
|
};
|
|
|
|
crypto@30000 {
|
|
device_type = "crypto";
|
|
model = "SEC2";
|
|
compatible = "talitos";
|
|
reg = <30000 f000>;
|
|
interrupts = <2d 2>;
|
|
interrupt-parent = <&mpic>;
|
|
num-channels = <4>;
|
|
channel-fifo-len = <18>;
|
|
exec-units-mask = <000000fe>;
|
|
descriptor-types-mask = <012b0ebf>;
|
|
};
|
|
|
|
mpic: pic@40000 {
|
|
clock-frequency = <0>;
|
|
interrupt-controller;
|
|
#address-cells = <0>;
|
|
#interrupt-cells = <2>;
|
|
reg = <40000 40000>;
|
|
built-in;
|
|
compatible = "chrp,open-pic";
|
|
device_type = "open-pic";
|
|
big-endian;
|
|
};
|
|
par_io@e0100 {
|
|
reg = <e0100 100>;
|
|
device_type = "par_io";
|
|
num-ports = <7>;
|
|
|
|
pio1: ucc_pin@01 {
|
|
pio-map = <
|
|
/* port pin dir open_drain assignment has_irq */
|
|
4 0a 1 0 2 0 /* TxD0 */
|
|
4 09 1 0 2 0 /* TxD1 */
|
|
4 08 1 0 2 0 /* TxD2 */
|
|
4 07 1 0 2 0 /* TxD3 */
|
|
4 17 1 0 2 0 /* TxD4 */
|
|
4 16 1 0 2 0 /* TxD5 */
|
|
4 15 1 0 2 0 /* TxD6 */
|
|
4 14 1 0 2 0 /* TxD7 */
|
|
4 0f 2 0 2 0 /* RxD0 */
|
|
4 0e 2 0 2 0 /* RxD1 */
|
|
4 0d 2 0 2 0 /* RxD2 */
|
|
4 0c 2 0 2 0 /* RxD3 */
|
|
4 1d 2 0 2 0 /* RxD4 */
|
|
4 1c 2 0 2 0 /* RxD5 */
|
|
4 1b 2 0 2 0 /* RxD6 */
|
|
4 1a 2 0 2 0 /* RxD7 */
|
|
4 0b 1 0 2 0 /* TX_EN */
|
|
4 18 1 0 2 0 /* TX_ER */
|
|
4 0f 2 0 2 0 /* RX_DV */
|
|
4 1e 2 0 2 0 /* RX_ER */
|
|
4 11 2 0 2 0 /* RX_CLK */
|
|
4 13 1 0 2 0 /* GTX_CLK */
|
|
1 1f 2 0 3 0>; /* GTX125 */
|
|
};
|
|
pio2: ucc_pin@02 {
|
|
pio-map = <
|
|
/* port pin dir open_drain assignment has_irq */
|
|
5 0a 1 0 2 0 /* TxD0 */
|
|
5 09 1 0 2 0 /* TxD1 */
|
|
5 08 1 0 2 0 /* TxD2 */
|
|
5 07 1 0 2 0 /* TxD3 */
|
|
5 17 1 0 2 0 /* TxD4 */
|
|
5 16 1 0 2 0 /* TxD5 */
|
|
5 15 1 0 2 0 /* TxD6 */
|
|
5 14 1 0 2 0 /* TxD7 */
|
|
5 0f 2 0 2 0 /* RxD0 */
|
|
5 0e 2 0 2 0 /* RxD1 */
|
|
5 0d 2 0 2 0 /* RxD2 */
|
|
5 0c 2 0 2 0 /* RxD3 */
|
|
5 1d 2 0 2 0 /* RxD4 */
|
|
5 1c 2 0 2 0 /* RxD5 */
|
|
5 1b 2 0 2 0 /* RxD6 */
|
|
5 1a 2 0 2 0 /* RxD7 */
|
|
5 0b 1 0 2 0 /* TX_EN */
|
|
5 18 1 0 2 0 /* TX_ER */
|
|
5 10 2 0 2 0 /* RX_DV */
|
|
5 1e 2 0 2 0 /* RX_ER */
|
|
5 11 2 0 2 0 /* RX_CLK */
|
|
5 13 1 0 2 0 /* GTX_CLK */
|
|
1 1f 2 0 3 0 /* GTX125 */
|
|
4 06 3 0 2 0 /* MDIO */
|
|
4 05 1 0 2 0>; /* MDC */
|
|
};
|
|
};
|
|
};
|
|
|
|
qe@e0080000 {
|
|
#address-cells = <1>;
|
|
#size-cells = <1>;
|
|
device_type = "qe";
|
|
model = "QE";
|
|
ranges = <0 e0080000 00040000>;
|
|
reg = <e0080000 480>;
|
|
brg-frequency = <0>;
|
|
bus-frequency = <179A7B00>;
|
|
|
|
muram@10000 {
|
|
device_type = "muram";
|
|
ranges = <0 00010000 0000c000>;
|
|
|
|
data-only@0{
|
|
reg = <0 c000>;
|
|
};
|
|
};
|
|
|
|
spi@4c0 {
|
|
device_type = "spi";
|
|
compatible = "fsl_spi";
|
|
reg = <4c0 40>;
|
|
interrupts = <2>;
|
|
interrupt-parent = <&qeic>;
|
|
mode = "cpu";
|
|
};
|
|
|
|
spi@500 {
|
|
device_type = "spi";
|
|
compatible = "fsl_spi";
|
|
reg = <500 40>;
|
|
interrupts = <1>;
|
|
interrupt-parent = <&qeic>;
|
|
mode = "cpu";
|
|
};
|
|
|
|
ucc@2000 {
|
|
device_type = "network";
|
|
compatible = "ucc_geth";
|
|
model = "UCC";
|
|
device-id = <1>;
|
|
reg = <2000 200>;
|
|
interrupts = <20>;
|
|
interrupt-parent = <&qeic>;
|
|
/*
|
|
* mac-address is deprecated and will be removed
|
|
* in 2.6.25. Only recent versions of
|
|
* U-Boot support local-mac-address, however.
|
|
*/
|
|
mac-address = [ 00 00 00 00 00 00 ];
|
|
local-mac-address = [ 00 00 00 00 00 00 ];
|
|
rx-clock = <0>;
|
|
tx-clock = <19>;
|
|
phy-handle = <&qe_phy0>;
|
|
phy-connection-type = "gmii";
|
|
pio-handle = <&pio1>;
|
|
};
|
|
|
|
ucc@3000 {
|
|
device_type = "network";
|
|
compatible = "ucc_geth";
|
|
model = "UCC";
|
|
device-id = <2>;
|
|
reg = <3000 200>;
|
|
interrupts = <21>;
|
|
interrupt-parent = <&qeic>;
|
|
/*
|
|
* mac-address is deprecated and will be removed
|
|
* in 2.6.25. Only recent versions of
|
|
* U-Boot support local-mac-address, however.
|
|
*/
|
|
mac-address = [ 00 00 00 00 00 00 ];
|
|
local-mac-address = [ 00 00 00 00 00 00 ];
|
|
rx-clock = <0>;
|
|
tx-clock = <14>;
|
|
phy-handle = <&qe_phy1>;
|
|
phy-connection-type = "gmii";
|
|
pio-handle = <&pio2>;
|
|
};
|
|
|
|
mdio@2120 {
|
|
#address-cells = <1>;
|
|
#size-cells = <0>;
|
|
reg = <2120 18>;
|
|
device_type = "mdio";
|
|
compatible = "ucc_geth_phy";
|
|
|
|
/* These are the same PHYs as on
|
|
* gianfar's MDIO bus */
|
|
qe_phy0: ethernet-phy@00 {
|
|
interrupt-parent = <&mpic>;
|
|
interrupts = <1 1>;
|
|
reg = <0>;
|
|
device_type = "ethernet-phy";
|
|
};
|
|
qe_phy1: ethernet-phy@01 {
|
|
interrupt-parent = <&mpic>;
|
|
interrupts = <2 1>;
|
|
reg = <1>;
|
|
device_type = "ethernet-phy";
|
|
};
|
|
qe_phy2: ethernet-phy@02 {
|
|
interrupt-parent = <&mpic>;
|
|
interrupts = <1 1>;
|
|
reg = <2>;
|
|
device_type = "ethernet-phy";
|
|
};
|
|
qe_phy3: ethernet-phy@03 {
|
|
interrupt-parent = <&mpic>;
|
|
interrupts = <2 1>;
|
|
reg = <3>;
|
|
device_type = "ethernet-phy";
|
|
};
|
|
};
|
|
|
|
qeic: qeic@80 {
|
|
interrupt-controller;
|
|
device_type = "qeic";
|
|
#address-cells = <0>;
|
|
#interrupt-cells = <1>;
|
|
reg = <80 80>;
|
|
built-in;
|
|
big-endian;
|
|
interrupts = <2e 2 2e 2>; //high:30 low:30
|
|
interrupt-parent = <&mpic>;
|
|
};
|
|
|
|
};
|
|
};
|