cd1678f963
Changes since V1: Apply Jonathan's review feedback: Revise device status attribute names, and split documentation into two sections. Add additional comments, and fix indention issues. Remove pointless zero initializations. Revise return value handling. Simplify some code sections. Split store_eeprom and sync handling into separate functions. Use strtobool where applicable. Document platform data structures using kernel-doc style. Use dev_to_iio_dev write_raw IIO_CHAN_INFO_FREQUENCY: Reject values <= 0 Make patch target drivers/iio Changes since V2: Use for_each_clear_bit() and __set_bit() where applicable. Add descriptive comment. Avoid temporary for struct regulator. spi_device_id name use ad9523-1, ad9523 will be added later. Signed-off-by: Michael Hennerich <michael.hennerich@analog.com> Acked-by: Jonathan Cameron <jic23@kernel.org> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
38 lines
1.4 KiB
Plaintext
38 lines
1.4 KiB
Plaintext
What: /sys/bus/iio/devices/iio:deviceX/pll2_feedback_clk_present
|
|
What: /sys/bus/iio/devices/iio:deviceX/pll2_reference_clk_present
|
|
What: /sys/bus/iio/devices/iio:deviceX/pll1_reference_clk_a_present
|
|
What: /sys/bus/iio/devices/iio:deviceX/pll1_reference_clk_b_present
|
|
What: /sys/bus/iio/devices/iio:deviceX/pll1_reference_clk_test_present
|
|
What: /sys/bus/iio/devices/iio:deviceX/vcxo_clk_present
|
|
KernelVersion: 3.4.0
|
|
Contact: linux-iio@vger.kernel.org
|
|
Description:
|
|
Reading returns either '1' or '0'.
|
|
'1' means that the clock in question is present.
|
|
'0' means that the clock is missing.
|
|
|
|
What: /sys/bus/iio/devices/iio:deviceX/pllY_locked
|
|
KernelVersion: 3.4.0
|
|
Contact: linux-iio@vger.kernel.org
|
|
Description:
|
|
Reading returns either '1' or '0'. '1' means that the
|
|
pllY is locked.
|
|
|
|
What: /sys/bus/iio/devices/iio:deviceX/store_eeprom
|
|
KernelVersion: 3.4.0
|
|
Contact: linux-iio@vger.kernel.org
|
|
Description:
|
|
Writing '1' stores the current device configuration into
|
|
on-chip EEPROM. After power-up or chip reset the device will
|
|
automatically load the saved configuration.
|
|
|
|
What: /sys/bus/iio/devices/iio:deviceX/sync_dividers
|
|
KernelVersion: 3.4.0
|
|
Contact: linux-iio@vger.kernel.org
|
|
Description:
|
|
Writing '1' triggers the clock distribution synchronization
|
|
functionality. All dividers are reset and the channels start
|
|
with their predefined phase offsets (out_altvoltageY_phase).
|
|
Writing this file has the effect as driving the external
|
|
/SYNC pin low.
|