lk/linux-kernel-test
1
0
Fork 0
Code Issues Pull Requests Releases Wiki Activity
8df97495c1
linux-kernel-test/arch/arm/mach-s3c64xx/pm.c
Mark Brown 51ccd81d9b ARM: S3C64XX: Power gate unused domains 
The S3C64xx CPUs have power gating support with a series of software
controllable power domains in the SoC. To take full advantage of these
we should implement runtime PM support but since several of the IP blocks
have no in tree drivers (and at this point aren't likely to acquire such
drivers) we can get some benefit from the hardware much more easily if
we just turn those blocks off unconditionally. This will cut down on the
leakage these domains generate without interfering with active usage.

Do this for:
 - Domain G: 3D acceleration
 - Domain V: MFC
 - Domain I: JPEG and camera interface
 - Domain P: 2D acceleration, TV encoder and scaler

This is easy to reverse if any of these devices do acquire drivers in the
future or as part of out of tree patches for them.

Signed-off-by: Mark Brown <broonie@opensource.wolfsonmicro.com>
Signed-off-by: Kukjin Kim <kgene.kim@samsung.com>
2011-12-03 19:49:26 +09:00

218 lines
5.5 KiB
C
Raw Blame History

/* linux/arch/arm/plat-s3c64xx/pm.c
*
* Copyright 2008 Openmoko, Inc.
* Copyright 2008 Simtec Electronics
* Ben Dooks <ben@simtec.co.uk>
* http://armlinux.simtec.co.uk/
*
* S3C64XX CPU PM support.
*
* This program is free software; you can redistribute it and/or modify
* it under the terms of the GNU General Public License version 2 as
* published by the Free Software Foundation.
*/
#include <linux/init.h>
#include <linux/suspend.h>
#include <linux/serial_core.h>
#include <linux/io.h>
#include <linux/gpio.h>
#include <mach/map.h>
#include <mach/irqs.h>
#include <plat/pm.h>
#include <plat/wakeup-mask.h>
#include <mach/regs-sys.h>
#include <mach/regs-gpio.h>
#include <mach/regs-clock.h>
#include <mach/regs-syscon-power.h>
#include <mach/regs-gpio-memport.h>
#include <mach/regs-modem.h>
#ifdef CONFIG_S3C_PM_DEBUG_LED_SMDK
void s3c_pm_debug_smdkled(u32 set, u32 clear)
{
unsigned long flags;
int i;
local_irq_save(flags);
for (i = 0; i < 4; i++) {
if (clear & (1 << i))
gpio_set_value(S3C64XX_GPN(12 + i), 0);
if (set & (1 << i))
gpio_set_value(S3C64XX_GPN(12 + i), 1);
}
local_irq_restore(flags);
}
#endif
static struct sleep_save core_save[] = {
SAVE_ITEM(S3C_APLL_LOCK),
SAVE_ITEM(S3C_MPLL_LOCK),
SAVE_ITEM(S3C_EPLL_LOCK),
SAVE_ITEM(S3C_CLK_SRC),
SAVE_ITEM(S3C_CLK_DIV0),
SAVE_ITEM(S3C_CLK_DIV1),
SAVE_ITEM(S3C_CLK_DIV2),
SAVE_ITEM(S3C_CLK_OUT),
SAVE_ITEM(S3C_HCLK_GATE),
SAVE_ITEM(S3C_PCLK_GATE),
SAVE_ITEM(S3C_SCLK_GATE),
SAVE_ITEM(S3C_MEM0_GATE),
SAVE_ITEM(S3C_EPLL_CON1),
SAVE_ITEM(S3C_EPLL_CON0),
SAVE_ITEM(S3C64XX_MEM0DRVCON),
SAVE_ITEM(S3C64XX_MEM1DRVCON),
#ifndef CONFIG_CPU_FREQ
SAVE_ITEM(S3C_APLL_CON),
SAVE_ITEM(S3C_MPLL_CON),
#endif
};
static struct sleep_save misc_save[] = {
SAVE_ITEM(S3C64XX_AHB_CON0),
SAVE_ITEM(S3C64XX_AHB_CON1),
SAVE_ITEM(S3C64XX_AHB_CON2),
SAVE_ITEM(S3C64XX_SPCON),
SAVE_ITEM(S3C64XX_MEM0CONSTOP),
SAVE_ITEM(S3C64XX_MEM1CONSTOP),
SAVE_ITEM(S3C64XX_MEM0CONSLP0),
SAVE_ITEM(S3C64XX_MEM0CONSLP1),
SAVE_ITEM(S3C64XX_MEM1CONSLP),
SAVE_ITEM(S3C64XX_SDMA_SEL),
SAVE_ITEM(S3C64XX_MODEM_MIFPCON),
SAVE_ITEM(S3C64XX_NORMAL_CFG),
};
void s3c_pm_configure_extint(void)
{
__raw_writel(s3c_irqwake_eintmask, S3C64XX_EINT_MASK);
}
void s3c_pm_restore_core(void)
{
__raw_writel(0, S3C64XX_EINT_MASK);
s3c_pm_debug_smdkled(1 << 2, 0);
s3c_pm_do_restore_core(core_save, ARRAY_SIZE(core_save));
s3c_pm_do_restore(misc_save, ARRAY_SIZE(misc_save));
}
void s3c_pm_save_core(void)
{
s3c_pm_do_save(misc_save, ARRAY_SIZE(misc_save));
s3c_pm_do_save(core_save, ARRAY_SIZE(core_save));
}
/* since both s3c6400 and s3c6410 share the same sleep pm calls, we
* put the per-cpu code in here until any new cpu comes along and changes
* this.
*/
static int s3c64xx_cpu_suspend(unsigned long arg)
{
unsigned long tmp;
/* set our standby method to sleep */
tmp = __raw_readl(S3C64XX_PWR_CFG);
tmp &= ~S3C64XX_PWRCFG_CFG_WFI_MASK;
tmp |= S3C64XX_PWRCFG_CFG_WFI_SLEEP;
__raw_writel(tmp, S3C64XX_PWR_CFG);
/* clear any old wakeup */
__raw_writel(__raw_readl(S3C64XX_WAKEUP_STAT),
S3C64XX_WAKEUP_STAT);
/* set the LED state to 0110 over sleep */
s3c_pm_debug_smdkled(3 << 1, 0xf);
/* issue the standby signal into the pm unit. Note, we
* issue a write-buffer drain just in case */
tmp = 0;
asm("b 1f\n\t"
".align 5\n\t"
"1:\n\t"
"mcr p15, 0, %0, c7, c10, 5\n\t"
"mcr p15, 0, %0, c7, c10, 4\n\t"
"mcr p15, 0, %0, c7, c0, 4" :: "r" (tmp));
/* we should never get past here */
panic("sleep resumed to originator?");
}
/* mapping of interrupts to parts of the wakeup mask */
static struct samsung_wakeup_mask wake_irqs[] = {
{ .irq = IRQ_RTC_ALARM, .bit = S3C64XX_PWRCFG_RTC_ALARM_DISABLE, },
{ .irq = IRQ_RTC_TIC, .bit = S3C64XX_PWRCFG_RTC_TICK_DISABLE, },
{ .irq = IRQ_PENDN, .bit = S3C64XX_PWRCFG_TS_DISABLE, },
{ .irq = IRQ_HSMMC0, .bit = S3C64XX_PWRCFG_MMC0_DISABLE, },
{ .irq = IRQ_HSMMC1, .bit = S3C64XX_PWRCFG_MMC1_DISABLE, },
{ .irq = IRQ_HSMMC2, .bit = S3C64XX_PWRCFG_MMC2_DISABLE, },
{ .irq = NO_WAKEUP_IRQ, .bit = S3C64XX_PWRCFG_BATF_DISABLE},
{ .irq = NO_WAKEUP_IRQ, .bit = S3C64XX_PWRCFG_MSM_DISABLE },
{ .irq = NO_WAKEUP_IRQ, .bit = S3C64XX_PWRCFG_HSI_DISABLE },
{ .irq = NO_WAKEUP_IRQ, .bit = S3C64XX_PWRCFG_MSM_DISABLE },
};
static void s3c64xx_pm_prepare(void)
{
samsung_sync_wakemask(S3C64XX_PWR_CFG,
wake_irqs, ARRAY_SIZE(wake_irqs));
/* store address of resume. */
__raw_writel(virt_to_phys(s3c_cpu_resume), S3C64XX_INFORM0);
/* ensure previous wakeup state is cleared before sleeping */
__raw_writel(__raw_readl(S3C64XX_WAKEUP_STAT), S3C64XX_WAKEUP_STAT);
}
static int s3c64xx_pm_init(void)
{
u32 val;
pm_cpu_prep = s3c64xx_pm_prepare;
pm_cpu_sleep = s3c64xx_cpu_suspend;
pm_uart_udivslot = 1;
/*
* Unconditionally disable power domains that contain only
* blocks which have no mainline driver support.
*/
val = __raw_readl(S3C64XX_NORMAL_CFG);
val &= ~(S3C64XX_NORMALCFG_DOMAIN_G_ON |
S3C64XX_NORMALCFG_DOMAIN_V_ON |
S3C64XX_NORMALCFG_DOMAIN_I_ON |
S3C64XX_NORMALCFG_DOMAIN_P_ON);
__raw_writel(val, S3C64XX_NORMAL_CFG);
#ifdef CONFIG_S3C_PM_DEBUG_LED_SMDK
gpio_request(S3C64XX_GPN(12), "DEBUG_LED0");
gpio_request(S3C64XX_GPN(13), "DEBUG_LED1");
gpio_request(S3C64XX_GPN(14), "DEBUG_LED2");
gpio_request(S3C64XX_GPN(15), "DEBUG_LED3");
gpio_direction_output(S3C64XX_GPN(12), 0);
gpio_direction_output(S3C64XX_GPN(13), 0);
gpio_direction_output(S3C64XX_GPN(14), 0);
gpio_direction_output(S3C64XX_GPN(15), 0);
#endif
return 0;
}
arch_initcall(s3c64xx_pm_init);
Reference in New Issue View Git Blame Copy Permalink