linux-kernel-test/drivers/usb
Hema Kalliguddi 92d2711f5d usb: musb: unmap dma buffer when switching to PIO
Buffer is mapped to dma when dma channel is
allocated. If, for some reason, dma channel
programming fails, musb code will fallback
to PIO mode to transfer that request. In
that case, we need to unmap the buffer
back to CPU.

MUSB RTL1.8 and above cannot handle buffers
which are not 32bit aligned. That happens to
every request sent by g_ether gadget
driver. Since the buffer sent was unaligned,
we need to fallback to PIO.

Because of that, g_ether was failing due
to missing buffer unmapping.

With this patch and [1] g_ether works fine
with all MUSB revisions.

Verified with OMAP3630 board, which has
MUSB RTL1.8 using g_ether and g_zero.

[1] http://www.spinics.net/lists/linux-usb/msg38400.html

Signed-off-by: Hema HK <hemahk@ti.com>
Signed-off-by: Felipe Balbi <balbi@ti.com>
2010-11-22 12:36:48 +02:00
..
atm Merge git://git.kernel.org/pub/scm/linux/kernel/git/davem/net-next-2.6 2010-10-23 11:47:02 -07:00
c67x00 usb: makefile cleanup 2010-10-22 10:22:07 -07:00
class Merge git://git.kernel.org/pub/scm/linux/kernel/git/gregkh/usb-2.6 2010-10-22 20:30:48 -07:00
core BKL: remove extraneous #include <smp_lock.h> 2010-11-17 08:59:32 -08:00
early usb: makefile cleanup 2010-10-22 10:22:07 -07:00
gadget BKL: remove extraneous #include <smp_lock.h> 2010-11-17 08:59:32 -08:00
host BKL: remove extraneous #include <smp_lock.h> 2010-11-17 08:59:32 -08:00
image SCSI host lock push-down 2010-11-16 13:33:23 -08:00
misc usb: misc: iowarrior: fix information leak to userland 2010-11-11 07:14:07 -08:00
mon BKL: remove extraneous #include <smp_lock.h> 2010-11-17 08:59:32 -08:00
musb usb: musb: unmap dma buffer when switching to PIO 2010-11-22 12:36:48 +02:00
otg usb: otg: twl4030-usb: switch over to defines in twl.h 2010-10-29 00:28:51 +02:00
serial BKL: remove extraneous #include <smp_lock.h> 2010-11-17 08:59:32 -08:00
storage SCSI host lock push-down 2010-11-16 13:33:23 -08:00
wusbcore usb: makefile cleanup 2010-10-22 10:22:07 -07:00
Kconfig USB: add USB EHCI support for MPC5121 SoC 2010-10-22 10:21:58 -07:00
Makefile USB: drivers/usb/Makefile: conditionally descend to 'early' 2010-08-10 14:35:38 -07:00
README
usb-skeleton.c llseek: automatically add .llseek fop 2010-10-15 15:53:27 +02:00

To understand all the Linux-USB framework, you'll use these resources:

    * This source code.  This is necessarily an evolving work, and
      includes kerneldoc that should help you get a current overview.
      ("make pdfdocs", and then look at "usb.pdf" for host side and
      "gadget.pdf" for peripheral side.)  Also, Documentation/usb has
      more information.

    * The USB 2.0 specification (from www.usb.org), with supplements
      such as those for USB OTG and the various device classes.
      The USB specification has a good overview chapter, and USB
      peripherals conform to the widely known "Chapter 9".

    * Chip specifications for USB controllers.  Examples include
      host controllers (on PCs, servers, and more); peripheral
      controllers (in devices with Linux firmware, like printers or
      cell phones); and hard-wired peripherals like Ethernet adapters.

    * Specifications for other protocols implemented by USB peripheral
      functions.  Some are vendor-specific; others are vendor-neutral
      but just standardized outside of the www.usb.org team.

Here is a list of what each subdirectory here is, and what is contained in
them.

core/		- This is for the core USB host code, including the
		  usbfs files and the hub class driver ("khubd").

host/		- This is for USB host controller drivers.  This
		  includes UHCI, OHCI, EHCI, and others that might
		  be used with more specialized "embedded" systems.

gadget/		- This is for USB peripheral controller drivers and
		  the various gadget drivers which talk to them.


Individual USB driver directories.  A new driver should be added to the
first subdirectory in the list below that it fits into.

image/		- This is for still image drivers, like scanners or
		  digital cameras.
../input/	- This is for any driver that uses the input subsystem,
		  like keyboard, mice, touchscreens, tablets, etc.
../media/	- This is for multimedia drivers, like video cameras,
		  radios, and any other drivers that talk to the v4l
		  subsystem.
../net/		- This is for network drivers.
serial/		- This is for USB to serial drivers.
storage/	- This is for USB mass-storage drivers.
class/		- This is for all USB device drivers that do not fit
		  into any of the above categories, and work for a range
		  of USB Class specified devices. 
misc/		- This is for all USB device drivers that do not fit
		  into any of the above categories.