lk/linux-kernel-test
1
0
Fork 0
Code Issues Pull Requests Releases Wiki Activity
a4d68279b4
linux-kernel-test/drivers/scsi/qla4xxx/ql4_isr.c
Karen Higgins 94bced3c1b [SCSI] qla4xxx: Correct Extended Sense Data Errors 
Fixed sense data errors occurring above the first 32 bytes,
as required by some third party applications.  Sense data
in the first 32 bytes has always been correct.

Patch updated to use srb data variables instead of scsi command
scratchpad data area, as scratchpad area is already used.

Also, corrected debug print alignment bug in dump_buffer routine.
Changed KERN_DEBUG to KERN_INFO in printk statements in this routine.

Changed version number to 5.01.00-k9

Signed-off-by: Karen Higgins <karen.higgins@qlogic.com>
[michaelc: fixed checkpath.pl errors]
Signed-off-by: Mike Christie <michaelc@cs.wisc.edu>
Signed-off-by: James Bottomley <James.Bottomley@HansenPartnership.com>
2009-07-30 08:50:00 -05:00

843 lines
23 KiB
C
Raw Blame History

/*
* QLogic iSCSI HBA Driver
* Copyright (c) 2003-2006 QLogic Corporation
*
* See LICENSE.qla4xxx for copyright and licensing details.
*/
#include "ql4_def.h"
#include "ql4_glbl.h"
#include "ql4_dbg.h"
#include "ql4_inline.h"
/**
* qla4xxx_copy_sense - copy sense data into cmd sense buffer
* @ha: Pointer to host adapter structure.
* @sts_entry: Pointer to status entry structure.
* @srb: Pointer to srb structure.
**/
static void qla4xxx_copy_sense(struct scsi_qla_host *ha,
struct status_entry *sts_entry,
struct srb *srb)
{
struct scsi_cmnd *cmd = srb->cmd;
uint16_t sense_len;
memset(cmd->sense_buffer, 0, SCSI_SENSE_BUFFERSIZE);
sense_len = le16_to_cpu(sts_entry->senseDataByteCnt);
if (sense_len == 0)
return;
/* Save total available sense length,
* not to exceed cmd's sense buffer size */
sense_len = min_t(uint16_t, sense_len, SCSI_SENSE_BUFFERSIZE);
srb->req_sense_ptr = cmd->sense_buffer;
srb->req_sense_len = sense_len;
/* Copy sense from sts_entry pkt */
sense_len = min_t(uint16_t, sense_len, IOCB_MAX_SENSEDATA_LEN);
memcpy(cmd->sense_buffer, sts_entry->senseData, sense_len);
DEBUG2(printk(KERN_INFO "scsi%ld:%d:%d:%d: %s: sense key = %x, "
"ASL= %02x, ASC/ASCQ = %02x/%02x\n", ha->host_no,
cmd->device->channel, cmd->device->id,
cmd->device->lun, __func__,
sts_entry->senseData[2] & 0x0f,
sts_entry->senseData[7],
sts_entry->senseData[12],
sts_entry->senseData[13]));
DEBUG5(qla4xxx_dump_buffer(cmd->sense_buffer, sense_len));
srb->flags |= SRB_GOT_SENSE;
/* Update srb, in case a sts_cont pkt follows */
srb->req_sense_ptr += sense_len;
srb->req_sense_len -= sense_len;
if (srb->req_sense_len != 0)
ha->status_srb = srb;
else
ha->status_srb = NULL;
}
/**
* qla4xxx_status_cont_entry - Process a Status Continuations entry.
* @ha: SCSI driver HA context
* @sts_cont: Entry pointer
*
* Extended sense data.
*/
static void
qla4xxx_status_cont_entry(struct scsi_qla_host *ha,
struct status_cont_entry *sts_cont)
{
struct srb *srb = ha->status_srb;
struct scsi_cmnd *cmd;
uint8_t sense_len;
if (srb == NULL)
return;
cmd = srb->cmd;
if (cmd == NULL) {
DEBUG2(printk(KERN_INFO "scsi%ld: %s: Cmd already returned "
"back to OS srb=%p srb->state:%d\n", ha->host_no,
__func__, srb, srb->state));
ha->status_srb = NULL;
return;
}
/* Copy sense data. */
sense_len = min_t(uint16_t, srb->req_sense_len,
IOCB_MAX_EXT_SENSEDATA_LEN);
memcpy(srb->req_sense_ptr, sts_cont->ext_sense_data, sense_len);
DEBUG5(qla4xxx_dump_buffer(srb->req_sense_ptr, sense_len));
srb->req_sense_ptr += sense_len;
srb->req_sense_len -= sense_len;
/* Place command on done queue. */
if (srb->req_sense_len == 0) {
qla4xxx_srb_compl(ha, srb);
ha->status_srb = NULL;
}
}
/**
* qla4xxx_status_entry - processes status IOCBs
* @ha: Pointer to host adapter structure.
* @sts_entry: Pointer to status entry structure.
**/
static void qla4xxx_status_entry(struct scsi_qla_host *ha,
struct status_entry *sts_entry)
{
uint8_t scsi_status;
struct scsi_cmnd *cmd;
struct srb *srb;
struct ddb_entry *ddb_entry;
uint32_t residual;
srb = qla4xxx_del_from_active_array(ha, le32_to_cpu(sts_entry->handle));
if (!srb) {
/* FIXMEdg: Don't we need to reset ISP in this case??? */
DEBUG2(printk(KERN_WARNING "scsi%ld: %s: Status Entry invalid "
"handle 0x%x, sp=%p. This cmd may have already "
"been completed.\n", ha->host_no, __func__,
le32_to_cpu(sts_entry->handle), srb));
dev_warn(&ha->pdev->dev, "%s invalid status entry:"
" handle=0x%0x\n", __func__, sts_entry->handle);
set_bit(DPC_RESET_HA, &ha->dpc_flags);
return;
}
cmd = srb->cmd;
if (cmd == NULL) {
DEBUG2(printk("scsi%ld: %s: Command already returned back to "
"OS pkt->handle=%d srb=%p srb->state:%d\n",
ha->host_no, __func__, sts_entry->handle,
srb, srb->state));
dev_warn(&ha->pdev->dev, "Command is NULL:"
" already returned to OS (srb=%p)\n", srb);
return;
}
ddb_entry = srb->ddb;
if (ddb_entry == NULL) {
cmd->result = DID_NO_CONNECT << 16;
goto status_entry_exit;
}
residual = le32_to_cpu(sts_entry->residualByteCnt);
/* Translate ISP error to a Linux SCSI error. */
scsi_status = sts_entry->scsiStatus;
switch (sts_entry->completionStatus) {
case SCS_COMPLETE:
if (sts_entry->iscsiFlags & ISCSI_FLAG_RESIDUAL_OVER) {
cmd->result = DID_ERROR << 16;
break;
}
if (sts_entry->iscsiFlags &ISCSI_FLAG_RESIDUAL_UNDER) {
scsi_set_resid(cmd, residual);
if (!scsi_status && ((scsi_bufflen(cmd) - residual) <
cmd->underflow)) {
cmd->result = DID_ERROR << 16;
DEBUG2(printk("scsi%ld:%d:%d:%d: %s: "
"Mid-layer Data underrun0, "
"xferlen = 0x%x, "
"residual = 0x%x\n", ha->host_no,
cmd->device->channel,
cmd->device->id,
cmd->device->lun, __func__,
scsi_bufflen(cmd), residual));
break;
}
}
cmd->result = DID_OK << 16 | scsi_status;
if (scsi_status != SCSI_CHECK_CONDITION)
break;
/* Copy Sense Data into sense buffer. */
qla4xxx_copy_sense(ha, sts_entry, srb);
break;
case SCS_INCOMPLETE:
/* Always set the status to DID_ERROR, since
* all conditions result in that status anyway */
cmd->result = DID_ERROR << 16;
break;
case SCS_RESET_OCCURRED:
DEBUG2(printk("scsi%ld:%d:%d:%d: %s: Device RESET occurred\n",
ha->host_no, cmd->device->channel,
cmd->device->id, cmd->device->lun, __func__));
cmd->result = DID_RESET << 16;
break;
case SCS_ABORTED:
DEBUG2(printk("scsi%ld:%d:%d:%d: %s: Abort occurred\n",
ha->host_no, cmd->device->channel,
cmd->device->id, cmd->device->lun, __func__));
cmd->result = DID_RESET << 16;
break;
case SCS_TIMEOUT:
DEBUG2(printk(KERN_INFO "scsi%ld:%d:%d:%d: Timeout\n",
ha->host_no, cmd->device->channel,
cmd->device->id, cmd->device->lun));
cmd->result = DID_TRANSPORT_DISRUPTED << 16;
/*
* Mark device missing so that we won't continue to send
* I/O to this device. We should get a ddb state change
* AEN soon.
*/
if (atomic_read(&ddb_entry->state) == DDB_STATE_ONLINE)
qla4xxx_mark_device_missing(ha, ddb_entry);
break;
case SCS_DATA_UNDERRUN:
case SCS_DATA_OVERRUN:
if ((sts_entry->iscsiFlags & ISCSI_FLAG_RESIDUAL_OVER) ||
(sts_entry->completionStatus == SCS_DATA_OVERRUN)) {
DEBUG2(printk("scsi%ld:%d:%d:%d: %s: " "Data overrun, "
"residual = 0x%x\n", ha->host_no,
cmd->device->channel, cmd->device->id,
cmd->device->lun, __func__, residual));
cmd->result = DID_ERROR << 16;
break;
}
scsi_set_resid(cmd, residual);
/*
* If there is scsi_status, it takes precedense over
* underflow condition.
*/
if (scsi_status != 0) {
cmd->result = DID_OK << 16 | scsi_status;
if (scsi_status != SCSI_CHECK_CONDITION)
break;
/* Copy Sense Data into sense buffer. */
qla4xxx_copy_sense(ha, sts_entry, srb);
} else {
/*
* If RISC reports underrun and target does not
* report it then we must have a lost frame, so
* tell upper layer to retry it by reporting a
* bus busy.
*/
if ((sts_entry->iscsiFlags &
ISCSI_FLAG_RESIDUAL_UNDER) == 0) {
cmd->result = DID_BUS_BUSY << 16;
} else if ((scsi_bufflen(cmd) - residual) <
cmd->underflow) {
/*
* Handle mid-layer underflow???
*
* For kernels less than 2.4, the driver must
* return an error if an underflow is detected.
* For kernels equal-to and above 2.4, the
* mid-layer will appearantly handle the
* underflow by detecting the residual count --
* unfortunately, we do not see where this is
* actually being done. In the interim, we
* will return DID_ERROR.
*/
DEBUG2(printk("scsi%ld:%d:%d:%d: %s: "
"Mid-layer Data underrun1, "
"xferlen = 0x%x, "
"residual = 0x%x\n", ha->host_no,
cmd->device->channel,
cmd->device->id,
cmd->device->lun, __func__,
scsi_bufflen(cmd), residual));
cmd->result = DID_ERROR << 16;
} else {
cmd->result = DID_OK << 16;
}
}
break;
case SCS_DEVICE_LOGGED_OUT:
case SCS_DEVICE_UNAVAILABLE:
/*
* Mark device missing so that we won't continue to
* send I/O to this device. We should get a ddb
* state change AEN soon.
*/
if (atomic_read(&ddb_entry->state) == DDB_STATE_ONLINE)
qla4xxx_mark_device_missing(ha, ddb_entry);
cmd->result = DID_TRANSPORT_DISRUPTED << 16;
break;
case SCS_QUEUE_FULL:
/*
* SCSI Mid-Layer handles device queue full
*/
cmd->result = DID_OK << 16 | sts_entry->scsiStatus;
DEBUG2(printk("scsi%ld:%d:%d: %s: QUEUE FULL detected "
"compl=%02x, scsi=%02x, state=%02x, iFlags=%02x,"
" iResp=%02x\n", ha->host_no, cmd->device->id,
cmd->device->lun, __func__,
sts_entry->completionStatus,
sts_entry->scsiStatus, sts_entry->state_flags,
sts_entry->iscsiFlags,
sts_entry->iscsiResponse));
break;
default:
cmd->result = DID_ERROR << 16;
break;
}
status_entry_exit:
/* complete the request, if not waiting for status_continuation pkt */
srb->cc_stat = sts_entry->completionStatus;
if (ha->status_srb == NULL)
qla4xxx_srb_compl(ha, srb);
}
/**
* qla4xxx_process_response_queue - process response queue completions
* @ha: Pointer to host adapter structure.
*
* This routine process response queue completions in interrupt context.
* Hardware_lock locked upon entry
**/
static void qla4xxx_process_response_queue(struct scsi_qla_host * ha)
{
uint32_t count = 0;
struct srb *srb = NULL;
struct status_entry *sts_entry;
/* Process all responses from response queue */
while ((ha->response_in =
(uint16_t)le32_to_cpu(ha->shadow_regs->rsp_q_in)) !=
ha->response_out) {
sts_entry = (struct status_entry *) ha->response_ptr;
count++;
/* Advance pointers for next entry */
if (ha->response_out == (RESPONSE_QUEUE_DEPTH - 1)) {
ha->response_out = 0;
ha->response_ptr = ha->response_ring;
} else {
ha->response_out++;
ha->response_ptr++;
}
/* process entry */
switch (sts_entry->hdr.entryType) {
case ET_STATUS:
/* Common status */
qla4xxx_status_entry(ha, sts_entry);
break;
case ET_PASSTHRU_STATUS:
break;
case ET_STATUS_CONTINUATION:
qla4xxx_status_cont_entry(ha,
(struct status_cont_entry *) sts_entry);
break;
case ET_COMMAND:
/* ISP device queue is full. Command not
* accepted by ISP. Queue command for
* later */
srb = qla4xxx_del_from_active_array(ha,
le32_to_cpu(sts_entry->
handle));
if (srb == NULL)
goto exit_prq_invalid_handle;
DEBUG2(printk("scsi%ld: %s: FW device queue full, "
"srb %p\n", ha->host_no, __func__, srb));
/* ETRY normally by sending it back with
* DID_BUS_BUSY */
srb->cmd->result = DID_BUS_BUSY << 16;
qla4xxx_srb_compl(ha, srb);
break;
case ET_CONTINUE:
/* Just throw away the continuation entries */
DEBUG2(printk("scsi%ld: %s: Continuation entry - "
"ignoring\n", ha->host_no, __func__));
break;
default:
/*
* Invalid entry in response queue, reset RISC
* firmware.
*/
DEBUG2(printk("scsi%ld: %s: Invalid entry %x in "
"response queue \n", ha->host_no,
__func__,
sts_entry->hdr.entryType));
goto exit_prq_error;
}
}
/*
* Done with responses, update the ISP For QLA4010, this also clears
* the interrupt.
*/
writel(ha->response_out, &ha->reg->rsp_q_out);
readl(&ha->reg->rsp_q_out);
return;
exit_prq_invalid_handle:
DEBUG2(printk("scsi%ld: %s: Invalid handle(srb)=%p type=%x IOCS=%x\n",
ha->host_no, __func__, srb, sts_entry->hdr.entryType,
sts_entry->completionStatus));
exit_prq_error:
writel(ha->response_out, &ha->reg->rsp_q_out);
readl(&ha->reg->rsp_q_out);
set_bit(DPC_RESET_HA, &ha->dpc_flags);
}
/**
* qla4xxx_isr_decode_mailbox - decodes mailbox status
* @ha: Pointer to host adapter structure.
* @mailbox_status: Mailbox status.
*
* This routine decodes the mailbox status during the ISR.
* Hardware_lock locked upon entry. runs in interrupt context.
**/
static void qla4xxx_isr_decode_mailbox(struct scsi_qla_host * ha,
uint32_t mbox_status)
{
int i;
uint32_t mbox_stat2, mbox_stat3;
if ((mbox_status == MBOX_STS_BUSY) ||
(mbox_status == MBOX_STS_INTERMEDIATE_COMPLETION) ||
(mbox_status >> 12 == MBOX_COMPLETION_STATUS)) {
ha->mbox_status[0] = mbox_status;
if (test_bit(AF_MBOX_COMMAND, &ha->flags)) {
/*
* Copy all mailbox registers to a temporary
* location and set mailbox command done flag
*/
for (i = 1; i < ha->mbox_status_count; i++)
ha->mbox_status[i] =
readl(&ha->reg->mailbox[i]);
set_bit(AF_MBOX_COMMAND_DONE, &ha->flags);
}
} else if (mbox_status >> 12 == MBOX_ASYNC_EVENT_STATUS) {
/* Immediately process the AENs that don't require much work.
* Only queue the database_changed AENs */
if (ha->aen_log.count < MAX_AEN_ENTRIES) {
for (i = 0; i < MBOX_AEN_REG_COUNT; i++)
ha->aen_log.entry[ha->aen_log.count].mbox_sts[i] =
readl(&ha->reg->mailbox[i]);
ha->aen_log.count++;
}
switch (mbox_status) {
case MBOX_ASTS_SYSTEM_ERROR:
/* Log Mailbox registers */
if (ql4xdontresethba) {
DEBUG2(printk("%s:Dont Reset HBA\n",
__func__));
} else {
set_bit(AF_GET_CRASH_RECORD, &ha->flags);
set_bit(DPC_RESET_HA, &ha->dpc_flags);
}
break;
case MBOX_ASTS_REQUEST_TRANSFER_ERROR:
case MBOX_ASTS_RESPONSE_TRANSFER_ERROR:
case MBOX_ASTS_NVRAM_INVALID:
case MBOX_ASTS_IP_ADDRESS_CHANGED:
case MBOX_ASTS_DHCP_LEASE_EXPIRED:
DEBUG2(printk("scsi%ld: AEN %04x, ERROR Status, "
"Reset HA\n", ha->host_no, mbox_status));
set_bit(DPC_RESET_HA, &ha->dpc_flags);
break;
case MBOX_ASTS_LINK_UP:
DEBUG2(printk("scsi%ld: AEN %04x Adapter LINK UP\n",
ha->host_no, mbox_status));
set_bit(AF_LINK_UP, &ha->flags);
break;
case MBOX_ASTS_LINK_DOWN:
DEBUG2(printk("scsi%ld: AEN %04x Adapter LINK DOWN\n",
ha->host_no, mbox_status));
clear_bit(AF_LINK_UP, &ha->flags);
break;
case MBOX_ASTS_HEARTBEAT:
ha->seconds_since_last_heartbeat = 0;
break;
case MBOX_ASTS_DHCP_LEASE_ACQUIRED:
DEBUG2(printk("scsi%ld: AEN %04x DHCP LEASE "
"ACQUIRED\n", ha->host_no, mbox_status));
set_bit(DPC_GET_DHCP_IP_ADDR, &ha->dpc_flags);
break;
case MBOX_ASTS_PROTOCOL_STATISTIC_ALARM:
case MBOX_ASTS_SCSI_COMMAND_PDU_REJECTED: /* Target
* mode
* only */
case MBOX_ASTS_UNSOLICITED_PDU_RECEIVED: /* Connection mode */
case MBOX_ASTS_IPSEC_SYSTEM_FATAL_ERROR:
case MBOX_ASTS_SUBNET_STATE_CHANGE:
/* No action */
DEBUG2(printk("scsi%ld: AEN %04x\n", ha->host_no,
mbox_status));
break;
case MBOX_ASTS_IP_ADDR_STATE_CHANGED:
mbox_stat2 = readl(&ha->reg->mailbox[2]);
mbox_stat3 = readl(&ha->reg->mailbox[3]);
if ((mbox_stat3 == 5) && (mbox_stat2 == 3))
set_bit(DPC_GET_DHCP_IP_ADDR, &ha->dpc_flags);
else if ((mbox_stat3 == 2) && (mbox_stat2 == 5))
set_bit(DPC_RESET_HA, &ha->dpc_flags);
break;
case MBOX_ASTS_MAC_ADDRESS_CHANGED:
case MBOX_ASTS_DNS:
/* No action */
DEBUG2(printk(KERN_INFO "scsi%ld: AEN %04x, "
"mbox_sts[1]=%04x, mbox_sts[2]=%04x\n",
ha->host_no, mbox_status,
readl(&ha->reg->mailbox[1]),
readl(&ha->reg->mailbox[2])));
break;
case MBOX_ASTS_SELF_TEST_FAILED:
case MBOX_ASTS_LOGIN_FAILED:
/* No action */
DEBUG2(printk("scsi%ld: AEN %04x, mbox_sts[1]=%04x, "
"mbox_sts[2]=%04x, mbox_sts[3]=%04x\n",
ha->host_no, mbox_status,
readl(&ha->reg->mailbox[1]),
readl(&ha->reg->mailbox[2]),
readl(&ha->reg->mailbox[3])));
break;
case MBOX_ASTS_DATABASE_CHANGED:
/* Queue AEN information and process it in the DPC
* routine */
if (ha->aen_q_count > 0) {
/* decrement available counter */
ha->aen_q_count--;
for (i = 1; i < MBOX_AEN_REG_COUNT; i++)
ha->aen_q[ha->aen_in].mbox_sts[i] =
readl(&ha->reg->mailbox[i]);
ha->aen_q[ha->aen_in].mbox_sts[0] = mbox_status;
/* print debug message */
DEBUG2(printk("scsi%ld: AEN[%d] %04x queued"
" mb1:0x%x mb2:0x%x mb3:0x%x mb4:0x%x\n",
ha->host_no, ha->aen_in,
mbox_status,
ha->aen_q[ha->aen_in].mbox_sts[1],
ha->aen_q[ha->aen_in].mbox_sts[2],
ha->aen_q[ha->aen_in].mbox_sts[3],
ha->aen_q[ha->aen_in]. mbox_sts[4]));
/* advance pointer */
ha->aen_in++;
if (ha->aen_in == MAX_AEN_ENTRIES)
ha->aen_in = 0;
/* The DPC routine will process the aen */
set_bit(DPC_AEN, &ha->dpc_flags);
} else {
DEBUG2(printk("scsi%ld: %s: aen %04x, queue "
"overflowed! AEN LOST!!\n",
ha->host_no, __func__,
mbox_status));
DEBUG2(printk("scsi%ld: DUMP AEN QUEUE\n",
ha->host_no));
for (i = 0; i < MAX_AEN_ENTRIES; i++) {
DEBUG2(printk("AEN[%d] %04x %04x %04x "
"%04x\n", i,
ha->aen_q[i].mbox_sts[0],
ha->aen_q[i].mbox_sts[1],
ha->aen_q[i].mbox_sts[2],
ha->aen_q[i].mbox_sts[3]));
}
}
break;
default:
DEBUG2(printk(KERN_WARNING
"scsi%ld: AEN %04x UNKNOWN\n",
ha->host_no, mbox_status));
break;
}
} else {
DEBUG2(printk("scsi%ld: Unknown mailbox status %08X\n",
ha->host_no, mbox_status));
ha->mbox_status[0] = mbox_status;
}
}
/**
* qla4xxx_interrupt_service_routine - isr
* @ha: pointer to host adapter structure.
*
* This is the main interrupt service routine.
* hardware_lock locked upon entry. runs in interrupt context.
**/
void qla4xxx_interrupt_service_routine(struct scsi_qla_host * ha,
uint32_t intr_status)
{
/* Process response queue interrupt. */
if (intr_status & CSR_SCSI_COMPLETION_INTR)
qla4xxx_process_response_queue(ha);
/* Process mailbox/asynch event interrupt.*/
if (intr_status & CSR_SCSI_PROCESSOR_INTR) {
qla4xxx_isr_decode_mailbox(ha,
readl(&ha->reg->mailbox[0]));
/* Clear Mailbox Interrupt */
writel(set_rmask(CSR_SCSI_PROCESSOR_INTR),
&ha->reg->ctrl_status);
readl(&ha->reg->ctrl_status);
}
}
/**
* qla4xxx_intr_handler - hardware interrupt handler.
* @irq: Unused
* @dev_id: Pointer to host adapter structure
**/
irqreturn_t qla4xxx_intr_handler(int irq, void *dev_id)
{
struct scsi_qla_host *ha;
uint32_t intr_status;
unsigned long flags = 0;
uint8_t reqs_count = 0;
ha = (struct scsi_qla_host *) dev_id;
if (!ha) {
DEBUG2(printk(KERN_INFO
"qla4xxx: Interrupt with NULL host ptr\n"));
return IRQ_NONE;
}
spin_lock_irqsave(&ha->hardware_lock, flags);
ha->isr_count++;
/*
* Repeatedly service interrupts up to a maximum of
* MAX_REQS_SERVICED_PER_INTR
*/
while (1) {
/*
* Read interrupt status
*/
if (le32_to_cpu(ha->shadow_regs->rsp_q_in) !=
ha->response_out)
intr_status = CSR_SCSI_COMPLETION_INTR;
else
intr_status = readl(&ha->reg->ctrl_status);
if ((intr_status &
(CSR_SCSI_RESET_INTR|CSR_FATAL_ERROR|INTR_PENDING)) ==
0) {
if (reqs_count == 0)
ha->spurious_int_count++;
break;
}
if (intr_status & CSR_FATAL_ERROR) {
DEBUG2(printk(KERN_INFO "scsi%ld: Fatal Error, "
"Status 0x%04x\n", ha->host_no,
readl(isp_port_error_status (ha))));
/* Issue Soft Reset to clear this error condition.
* This will prevent the RISC from repeatedly
* interrupting the driver; thus, allowing the DPC to
* get scheduled to continue error recovery.
* NOTE: Disabling RISC interrupts does not work in
* this case, as CSR_FATAL_ERROR overrides
* CSR_SCSI_INTR_ENABLE */
if ((readl(&ha->reg->ctrl_status) &
CSR_SCSI_RESET_INTR) == 0) {
writel(set_rmask(CSR_SOFT_RESET),
&ha->reg->ctrl_status);
readl(&ha->reg->ctrl_status);
}
writel(set_rmask(CSR_FATAL_ERROR),
&ha->reg->ctrl_status);
readl(&ha->reg->ctrl_status);
__qla4xxx_disable_intrs(ha);
set_bit(DPC_RESET_HA, &ha->dpc_flags);
break;
} else if (intr_status & CSR_SCSI_RESET_INTR) {
clear_bit(AF_ONLINE, &ha->flags);
__qla4xxx_disable_intrs(ha);
writel(set_rmask(CSR_SCSI_RESET_INTR),
&ha->reg->ctrl_status);
readl(&ha->reg->ctrl_status);
if (!ql4_mod_unload)
set_bit(DPC_RESET_HA_INTR, &ha->dpc_flags);
break;
} else if (intr_status & INTR_PENDING) {
qla4xxx_interrupt_service_routine(ha, intr_status);
ha->total_io_count++;
if (++reqs_count == MAX_REQS_SERVICED_PER_INTR)
break;
intr_status = 0;
}
}
spin_unlock_irqrestore(&ha->hardware_lock, flags);
return IRQ_HANDLED;
}
/**
* qla4xxx_process_aen - processes AENs generated by firmware
* @ha: pointer to host adapter structure.
* @process_aen: type of AENs to process
*
* Processes specific types of Asynchronous Events generated by firmware.
* The type of AENs to process is specified by process_aen and can be
* PROCESS_ALL_AENS 0
* FLUSH_DDB_CHANGED_AENS 1
* RELOGIN_DDB_CHANGED_AENS 2
**/
void qla4xxx_process_aen(struct scsi_qla_host * ha, uint8_t process_aen)
{
uint32_t mbox_sts[MBOX_AEN_REG_COUNT];
struct aen *aen;
int i;
unsigned long flags;
spin_lock_irqsave(&ha->hardware_lock, flags);
while (ha->aen_out != ha->aen_in) {
aen = &ha->aen_q[ha->aen_out];
/* copy aen information to local structure */
for (i = 0; i < MBOX_AEN_REG_COUNT; i++)
mbox_sts[i] = aen->mbox_sts[i];
ha->aen_q_count++;
ha->aen_out++;
if (ha->aen_out == MAX_AEN_ENTRIES)
ha->aen_out = 0;
spin_unlock_irqrestore(&ha->hardware_lock, flags);
DEBUG2(printk("qla4xxx(%ld): AEN[%d]=0x%08x, mbx1=0x%08x mbx2=0x%08x"
" mbx3=0x%08x mbx4=0x%08x\n", ha->host_no,
(ha->aen_out ? (ha->aen_out-1): (MAX_AEN_ENTRIES-1)),
mbox_sts[0], mbox_sts[1], mbox_sts[2],
mbox_sts[3], mbox_sts[4]));
switch (mbox_sts[0]) {
case MBOX_ASTS_DATABASE_CHANGED:
if (process_aen == FLUSH_DDB_CHANGED_AENS) {
DEBUG2(printk("scsi%ld: AEN[%d] %04x, index "
"[%d] state=%04x FLUSHED!\n",
ha->host_no, ha->aen_out,
mbox_sts[0], mbox_sts[2],
mbox_sts[3]));
break;
} else if (process_aen == RELOGIN_DDB_CHANGED_AENS) {
/* for use during init time, we only want to
* relogin non-active ddbs */
struct ddb_entry *ddb_entry;
ddb_entry =
/* FIXME: name length? */
qla4xxx_lookup_ddb_by_fw_index(ha,
mbox_sts[2]);
if (!ddb_entry)
break;
ddb_entry->dev_scan_wait_to_complete_relogin =
0;
ddb_entry->dev_scan_wait_to_start_relogin =
jiffies +
((ddb_entry->default_time2wait +
4) * HZ);
DEBUG2(printk("scsi%ld: ddb index [%d] initate"
" RELOGIN after %d seconds\n",
ha->host_no,
ddb_entry->fw_ddb_index,
ddb_entry->default_time2wait +
4));
break;
}
if (mbox_sts[1] == 0) { /* Global DB change. */
qla4xxx_reinitialize_ddb_list(ha);
} else if (mbox_sts[1] == 1) { /* Specific device. */
qla4xxx_process_ddb_changed(ha, mbox_sts[2],
mbox_sts[3]);
}
break;
}
spin_lock_irqsave(&ha->hardware_lock, flags);
}
spin_unlock_irqrestore(&ha->hardware_lock, flags);
}
Reference in New Issue View Git Blame Copy Permalink