linux-kernel-test/arch/um/drivers/line.c
Paolo 'Blaisorblade' Giarrusso dbce706e25 [PATCH] uml: add and use generic hw_controller_type->release
With Chris Wedgwood <cw@f00f.org>

Currently UML must explicitly call the UML-specific
free_irq_by_irq_and_dev() for each free_irq call it's done.

This is needed because ->shutdown and/or ->disable are only called when the
last "action" for that irq is removed.

Instead, for UML shared IRQs (UML IRQs are very often, if not always,
shared), for each dev_id some setup is done, which must be cleared on the
release of that fd.  For instance, for each open console a new instance
(i.e.  new dev_id) of the same IRQ is requested().

Exactly, a fd is stored in an array (pollfds), which is after read by a
host thread and passed to poll().  Each event registered by poll() triggers
an interrupt.  So, for each free_irq() we must remove the corresponding
host fd from the table, which we do via this -release() method.

In this patch we add an appropriate hook for this, and remove all uses of
it by pointing the hook to the said procedure; this is safe to do since the
said procedure.

Also some cosmetic improvements are included.

This is heavily based on some work by Chris Wedgwood, which however didn't
get the patch merged for something I'd call a "misunderstanding" (the need
for this patch wasn't cleanly explained, thus adding the generic hook was
felt as undesirable).

Signed-off-by: Paolo 'Blaisorblade' Giarrusso <blaisorblade@yahoo.it>
CC: Ingo Molnar <mingo@redhat.com>
Signed-off-by: Andrew Morton <akpm@osdl.org>
Signed-off-by: Linus Torvalds <torvalds@osdl.org>
2005-06-21 19:07:32 -07:00

803 lines
18 KiB
C

/*
* Copyright (C) 2001, 2002 Jeff Dike (jdike@karaya.com)
* Licensed under the GPL
*/
#include "linux/sched.h"
#include "linux/slab.h"
#include "linux/list.h"
#include "linux/kd.h"
#include "linux/interrupt.h"
#include "linux/devfs_fs_kernel.h"
#include "asm/uaccess.h"
#include "chan_kern.h"
#include "irq_user.h"
#include "line.h"
#include "kern.h"
#include "user_util.h"
#include "kern_util.h"
#include "os.h"
#include "irq_kern.h"
#define LINE_BUFSIZE 4096
static irqreturn_t line_interrupt(int irq, void *data, struct pt_regs *unused)
{
struct tty_struct *tty = data;
struct line *line = tty->driver_data;
if (line)
chan_interrupt(&line->chan_list, &line->task, tty, irq);
return IRQ_HANDLED;
}
static void line_timer_cb(void *arg)
{
struct tty_struct *tty = arg;
struct line *line = tty->driver_data;
line_interrupt(line->driver->read_irq, arg, NULL);
}
/* Returns the free space inside the ring buffer of this line.
*
* Should be called while holding line->lock (this does not modify datas).
*/
static int write_room(struct line *line)
{
int n;
if (line->buffer == NULL)
return LINE_BUFSIZE - 1;
/* This is for the case where the buffer is wrapped! */
n = line->head - line->tail;
if (n <= 0)
n = LINE_BUFSIZE + n; /* The other case */
return n - 1;
}
int line_write_room(struct tty_struct *tty)
{
struct line *line = tty->driver_data;
unsigned long flags;
int room;
if (tty->stopped)
return 0;
spin_lock_irqsave(&line->lock, flags);
room = write_room(line);
spin_unlock_irqrestore(&line->lock, flags);
/*XXX: Warning to remove */
if (0 == room)
printk(KERN_DEBUG "%s: %s: no room left in buffer\n",
__FUNCTION__,tty->name);
return room;
}
int line_chars_in_buffer(struct tty_struct *tty)
{
struct line *line = tty->driver_data;
unsigned long flags;
int ret;
spin_lock_irqsave(&line->lock, flags);
/*write_room subtracts 1 for the needed NULL, so we readd it.*/
ret = LINE_BUFSIZE - (write_room(line) + 1);
spin_unlock_irqrestore(&line->lock, flags);
return ret;
}
/*
* This copies the content of buf into the circular buffer associated with
* this line.
* The return value is the number of characters actually copied, i.e. the ones
* for which there was space: this function is not supposed to ever flush out
* the circular buffer.
*
* Must be called while holding line->lock!
*/
static int buffer_data(struct line *line, const char *buf, int len)
{
int end, room;
if(line->buffer == NULL){
line->buffer = kmalloc(LINE_BUFSIZE, GFP_ATOMIC);
if (line->buffer == NULL) {
printk("buffer_data - atomic allocation failed\n");
return(0);
}
line->head = line->buffer;
line->tail = line->buffer;
}
room = write_room(line);
len = (len > room) ? room : len;
end = line->buffer + LINE_BUFSIZE - line->tail;
if (len < end){
memcpy(line->tail, buf, len);
line->tail += len;
} else {
/* The circular buffer is wrapping */
memcpy(line->tail, buf, end);
buf += end;
memcpy(line->buffer, buf, len - end);
line->tail = line->buffer + len - end;
}
return len;
}
/*
* Flushes the ring buffer to the output channels. That is, write_chan is
* called, passing it line->head as buffer, and an appropriate count.
*
* On exit, returns 1 when the buffer is empty,
* 0 when the buffer is not empty on exit,
* and -errno when an error occurred.
*
* Must be called while holding line->lock!*/
static int flush_buffer(struct line *line)
{
int n, count;
if ((line->buffer == NULL) || (line->head == line->tail))
return 1;
if (line->tail < line->head) {
/* line->buffer + LINE_BUFSIZE is the end of the buffer! */
count = line->buffer + LINE_BUFSIZE - line->head;
n = write_chan(&line->chan_list, line->head, count,
line->driver->write_irq);
if (n < 0)
return n;
if (n == count) {
/* We have flushed from ->head to buffer end, now we
* must flush only from the beginning to ->tail.*/
line->head = line->buffer;
} else {
line->head += n;
return 0;
}
}
count = line->tail - line->head;
n = write_chan(&line->chan_list, line->head, count,
line->driver->write_irq);
if(n < 0)
return n;
line->head += n;
return line->head == line->tail;
}
void line_flush_buffer(struct tty_struct *tty)
{
struct line *line = tty->driver_data;
unsigned long flags;
int err;
/*XXX: copied from line_write, verify if it is correct!*/
if(tty->stopped)
return;
//return 0;
spin_lock_irqsave(&line->lock, flags);
err = flush_buffer(line);
/*if (err == 1)
err = 0;*/
spin_unlock_irqrestore(&line->lock, flags);
//return err;
}
/* We map both ->flush_chars and ->put_char (which go in pair) onto ->flush_buffer
* and ->write. Hope it's not that bad.*/
void line_flush_chars(struct tty_struct *tty)
{
line_flush_buffer(tty);
}
void line_put_char(struct tty_struct *tty, unsigned char ch)
{
line_write(tty, &ch, sizeof(ch));
}
int line_write(struct tty_struct *tty, const unsigned char *buf, int len)
{
struct line *line = tty->driver_data;
unsigned long flags;
int n, err, ret = 0;
if(tty->stopped)
return 0;
spin_lock_irqsave(&line->lock, flags);
if (line->head != line->tail) {
ret = buffer_data(line, buf, len);
err = flush_buffer(line);
if (err <= 0 && (err != -EAGAIN || !ret))
ret = err;
} else {
n = write_chan(&line->chan_list, buf, len,
line->driver->write_irq);
if (n < 0) {
ret = n;
goto out_up;
}
len -= n;
ret += n;
if (len > 0)
ret += buffer_data(line, buf + n, len);
}
out_up:
spin_unlock_irqrestore(&line->lock, flags);
return ret;
}
void line_set_termios(struct tty_struct *tty, struct termios * old)
{
/* nothing */
}
static struct {
int cmd;
char *level;
char *name;
} tty_ioctls[] = {
/* don't print these, they flood the log ... */
{ TCGETS, NULL, "TCGETS" },
{ TCSETS, NULL, "TCSETS" },
{ TCSETSW, NULL, "TCSETSW" },
{ TCFLSH, NULL, "TCFLSH" },
{ TCSBRK, NULL, "TCSBRK" },
/* general tty stuff */
{ TCSETSF, KERN_DEBUG, "TCSETSF" },
{ TCGETA, KERN_DEBUG, "TCGETA" },
{ TIOCMGET, KERN_DEBUG, "TIOCMGET" },
{ TCSBRKP, KERN_DEBUG, "TCSBRKP" },
{ TIOCMSET, KERN_DEBUG, "TIOCMSET" },
/* linux-specific ones */
{ TIOCLINUX, KERN_INFO, "TIOCLINUX" },
{ KDGKBMODE, KERN_INFO, "KDGKBMODE" },
{ KDGKBTYPE, KERN_INFO, "KDGKBTYPE" },
{ KDSIGACCEPT, KERN_INFO, "KDSIGACCEPT" },
};
int line_ioctl(struct tty_struct *tty, struct file * file,
unsigned int cmd, unsigned long arg)
{
int ret;
int i;
ret = 0;
switch(cmd) {
#ifdef TIOCGETP
case TIOCGETP:
case TIOCSETP:
case TIOCSETN:
#endif
#ifdef TIOCGETC
case TIOCGETC:
case TIOCSETC:
#endif
#ifdef TIOCGLTC
case TIOCGLTC:
case TIOCSLTC:
#endif
case TCGETS:
case TCSETSF:
case TCSETSW:
case TCSETS:
case TCGETA:
case TCSETAF:
case TCSETAW:
case TCSETA:
case TCXONC:
case TCFLSH:
case TIOCOUTQ:
case TIOCINQ:
case TIOCGLCKTRMIOS:
case TIOCSLCKTRMIOS:
case TIOCPKT:
case TIOCGSOFTCAR:
case TIOCSSOFTCAR:
return -ENOIOCTLCMD;
#if 0
case TCwhatever:
/* do something */
break;
#endif
default:
for (i = 0; i < ARRAY_SIZE(tty_ioctls); i++)
if (cmd == tty_ioctls[i].cmd)
break;
if (i < ARRAY_SIZE(tty_ioctls)) {
if (NULL != tty_ioctls[i].level)
printk("%s%s: %s: ioctl %s called\n",
tty_ioctls[i].level, __FUNCTION__,
tty->name, tty_ioctls[i].name);
} else {
printk(KERN_ERR "%s: %s: unknown ioctl: 0x%x\n",
__FUNCTION__, tty->name, cmd);
}
ret = -ENOIOCTLCMD;
break;
}
return ret;
}
static irqreturn_t line_write_interrupt(int irq, void *data,
struct pt_regs *unused)
{
struct tty_struct *tty = data;
struct line *line = tty->driver_data;
int err;
/* Interrupts are enabled here because we registered the interrupt with
* SA_INTERRUPT (see line_setup_irq).*/
spin_lock_irq(&line->lock);
err = flush_buffer(line);
if (err == 0) {
return IRQ_NONE;
} else if(err < 0) {
line->head = line->buffer;
line->tail = line->buffer;
}
spin_unlock_irq(&line->lock);
if(tty == NULL)
return IRQ_NONE;
if (test_bit(TTY_DO_WRITE_WAKEUP, &tty->flags) &&
(tty->ldisc.write_wakeup != NULL))
(tty->ldisc.write_wakeup)(tty);
/* BLOCKING mode
* In blocking mode, everything sleeps on tty->write_wait.
* Sleeping in the console driver would break non-blocking
* writes.
*/
if (waitqueue_active(&tty->write_wait))
wake_up_interruptible(&tty->write_wait);
return IRQ_HANDLED;
}
int line_setup_irq(int fd, int input, int output, struct tty_struct *tty)
{
struct line *line = tty->driver_data;
struct line_driver *driver = line->driver;
int err = 0, flags = SA_INTERRUPT | SA_SHIRQ | SA_SAMPLE_RANDOM;
if (input)
err = um_request_irq(driver->read_irq, fd, IRQ_READ,
line_interrupt, flags,
driver->read_irq_name, tty);
if (err)
return err;
if (output)
err = um_request_irq(driver->write_irq, fd, IRQ_WRITE,
line_write_interrupt, flags,
driver->write_irq_name, tty);
line->have_irq = 1;
return err;
}
void line_disable(struct tty_struct *tty, int current_irq)
{
struct line *line = tty->driver_data;
if(!line->have_irq)
return;
if(line->driver->read_irq == current_irq)
free_irq_later(line->driver->read_irq, tty);
else {
free_irq(line->driver->read_irq, tty);
}
if(line->driver->write_irq == current_irq)
free_irq_later(line->driver->write_irq, tty);
else {
free_irq(line->driver->write_irq, tty);
}
line->have_irq = 0;
}
int line_open(struct line *lines, struct tty_struct *tty,
struct chan_opts *opts)
{
struct line *line;
int err = 0;
line = &lines[tty->index];
tty->driver_data = line;
/* The IRQ which takes this lock is not yet enabled and won't be run
* before the end, so we don't need to use spin_lock_irq.*/
spin_lock(&line->lock);
if (tty->count == 1) {
if (!line->valid) {
err = -ENODEV;
goto out;
}
if (list_empty(&line->chan_list)) {
err = parse_chan_pair(line->init_str, &line->chan_list,
line->init_pri, tty->index, opts);
if(err) goto out;
err = open_chan(&line->chan_list);
if(err) goto out;
}
/* Here the interrupt is registered.*/
enable_chan(&line->chan_list, tty);
INIT_WORK(&line->task, line_timer_cb, tty);
}
if(!line->sigio){
chan_enable_winch(&line->chan_list, tty);
line->sigio = 1;
}
chan_window_size(&line->chan_list, &tty->winsize.ws_row,
&tty->winsize.ws_col);
line->count++;
out:
spin_unlock(&line->lock);
return err;
}
static void unregister_winch(struct tty_struct *tty);
void line_close(struct tty_struct *tty, struct file * filp)
{
struct line *line = tty->driver_data;
/* XXX: I assume this should be called in process context, not with
* interrupts disabled!
*/
spin_lock_irq(&line->lock);
/* We ignore the error anyway! */
flush_buffer(line);
line->count--;
if (tty->count == 1) {
line_disable(tty, -1);
tty->driver_data = NULL;
}
if((line->count == 0) && line->sigio){
unregister_winch(tty);
line->sigio = 0;
}
spin_unlock_irq(&line->lock);
}
void close_lines(struct line *lines, int nlines)
{
int i;
for(i = 0; i < nlines; i++)
close_chan(&lines[i].chan_list);
}
/* Common setup code for both startup command line and mconsole initialization.
* @lines contains the the array (of size @num) to modify;
* @init is the setup string;
* @all_allowed is a boolean saying if we can setup the whole @lines
* at once. For instance, it will be usually true for startup init. (where we
* can use con=xterm) and false for mconsole.*/
int line_setup(struct line *lines, unsigned int num, char *init, int all_allowed)
{
int i, n;
char *end;
if(*init == '=') {
/* We said con=/ssl= instead of con#=, so we are configuring all
* consoles at once.*/
n = -1;
} else {
n = simple_strtoul(init, &end, 0);
if(*end != '='){
printk(KERN_ERR "line_setup failed to parse \"%s\"\n",
init);
return 0;
}
init = end;
}
init++;
if (n >= (signed int) num) {
printk("line_setup - %d out of range ((0 ... %d) allowed)\n",
n, num - 1);
return 0;
} else if (n >= 0){
if (lines[n].count > 0) {
printk("line_setup - device %d is open\n", n);
return 0;
}
if (lines[n].init_pri <= INIT_ONE){
lines[n].init_pri = INIT_ONE;
if (!strcmp(init, "none"))
lines[n].valid = 0;
else {
lines[n].init_str = init;
lines[n].valid = 1;
}
}
} else if(!all_allowed){
printk("line_setup - can't configure all devices from "
"mconsole\n");
return 0;
} else {
for(i = 0; i < num; i++){
if(lines[i].init_pri <= INIT_ALL){
lines[i].init_pri = INIT_ALL;
if(!strcmp(init, "none")) lines[i].valid = 0;
else {
lines[i].init_str = init;
lines[i].valid = 1;
}
}
}
}
return 1;
}
int line_config(struct line *lines, unsigned int num, char *str)
{
char *new = uml_strdup(str);
if(new == NULL){
printk("line_config - uml_strdup failed\n");
return -ENOMEM;
}
return !line_setup(lines, num, new, 0);
}
int line_get_config(char *name, struct line *lines, unsigned int num, char *str,
int size, char **error_out)
{
struct line *line;
char *end;
int dev, n = 0;
dev = simple_strtoul(name, &end, 0);
if((*end != '\0') || (end == name)){
*error_out = "line_get_config failed to parse device number";
return 0;
}
if((dev < 0) || (dev >= num)){
*error_out = "device number out of range";
return 0;
}
line = &lines[dev];
spin_lock(&line->lock);
if(!line->valid)
CONFIG_CHUNK(str, size, n, "none", 1);
else if(line->count == 0)
CONFIG_CHUNK(str, size, n, line->init_str, 1);
else n = chan_config_string(&line->chan_list, str, size, error_out);
spin_unlock(&line->lock);
return n;
}
int line_remove(struct line *lines, unsigned int num, char *str)
{
char config[sizeof("conxxxx=none\0")];
sprintf(config, "%s=none", str);
return !line_setup(lines, num, config, 0);
}
struct tty_driver *line_register_devfs(struct lines *set,
struct line_driver *line_driver,
struct tty_operations *ops, struct line *lines,
int nlines)
{
int i;
struct tty_driver *driver = alloc_tty_driver(nlines);
if (!driver)
return NULL;
driver->driver_name = line_driver->name;
driver->name = line_driver->device_name;
driver->devfs_name = line_driver->devfs_name;
driver->major = line_driver->major;
driver->minor_start = line_driver->minor_start;
driver->type = line_driver->type;
driver->subtype = line_driver->subtype;
driver->flags = TTY_DRIVER_REAL_RAW;
driver->init_termios = tty_std_termios;
tty_set_operations(driver, ops);
if (tty_register_driver(driver)) {
printk("%s: can't register %s driver\n",
__FUNCTION__,line_driver->name);
put_tty_driver(driver);
return NULL;
}
for(i = 0; i < nlines; i++){
if(!lines[i].valid)
tty_unregister_device(driver, i);
}
mconsole_register_dev(&line_driver->mc);
return driver;
}
void lines_init(struct line *lines, int nlines)
{
struct line *line;
int i;
for(i = 0; i < nlines; i++){
line = &lines[i];
INIT_LIST_HEAD(&line->chan_list);
spin_lock_init(&line->lock);
if(line->init_str != NULL){
line->init_str = uml_strdup(line->init_str);
if(line->init_str == NULL)
printk("lines_init - uml_strdup returned "
"NULL\n");
}
}
}
struct winch {
struct list_head list;
int fd;
int tty_fd;
int pid;
struct tty_struct *tty;
};
irqreturn_t winch_interrupt(int irq, void *data, struct pt_regs *unused)
{
struct winch *winch = data;
struct tty_struct *tty;
struct line *line;
int err;
char c;
if(winch->fd != -1){
err = generic_read(winch->fd, &c, NULL);
if(err < 0){
if(err != -EAGAIN){
printk("winch_interrupt : read failed, "
"errno = %d\n", -err);
printk("fd %d is losing SIGWINCH support\n",
winch->tty_fd);
return IRQ_HANDLED;
}
goto out;
}
}
tty = winch->tty;
if (tty != NULL) {
line = tty->driver_data;
chan_window_size(&line->chan_list,
&tty->winsize.ws_row,
&tty->winsize.ws_col);
kill_pg(tty->pgrp, SIGWINCH, 1);
}
out:
if(winch->fd != -1)
reactivate_fd(winch->fd, WINCH_IRQ);
return IRQ_HANDLED;
}
DECLARE_MUTEX(winch_handler_sem);
LIST_HEAD(winch_handlers);
void register_winch_irq(int fd, int tty_fd, int pid, struct tty_struct *tty)
{
struct winch *winch;
down(&winch_handler_sem);
winch = kmalloc(sizeof(*winch), GFP_KERNEL);
if (winch == NULL) {
printk("register_winch_irq - kmalloc failed\n");
goto out;
}
*winch = ((struct winch) { .list = LIST_HEAD_INIT(winch->list),
.fd = fd,
.tty_fd = tty_fd,
.pid = pid,
.tty = tty });
list_add(&winch->list, &winch_handlers);
if(um_request_irq(WINCH_IRQ, fd, IRQ_READ, winch_interrupt,
SA_INTERRUPT | SA_SHIRQ | SA_SAMPLE_RANDOM,
"winch", winch) < 0)
printk("register_winch_irq - failed to register IRQ\n");
out:
up(&winch_handler_sem);
}
static void unregister_winch(struct tty_struct *tty)
{
struct list_head *ele;
struct winch *winch, *found = NULL;
down(&winch_handler_sem);
list_for_each(ele, &winch_handlers){
winch = list_entry(ele, struct winch, list);
if(winch->tty == tty){
found = winch;
break;
}
}
if(found == NULL)
goto out;
if(winch->pid != -1)
os_kill_process(winch->pid, 1);
free_irq_by_irq_and_dev(WINCH_IRQ, winch);
free_irq(WINCH_IRQ, winch);
list_del(&winch->list);
kfree(winch);
out:
up(&winch_handler_sem);
}
static void winch_cleanup(void)
{
struct list_head *ele;
struct winch *winch;
list_for_each(ele, &winch_handlers){
winch = list_entry(ele, struct winch, list);
if(winch->fd != -1){
deactivate_fd(winch->fd, WINCH_IRQ);
os_close_file(winch->fd);
}
if(winch->pid != -1)
os_kill_process(winch->pid, 1);
}
}
__uml_exitcall(winch_cleanup);
char *add_xterm_umid(char *base)
{
char *umid, *title;
int len;
umid = get_umid(1);
if(umid == NULL)
return base;
len = strlen(base) + strlen(" ()") + strlen(umid) + 1;
title = kmalloc(len, GFP_KERNEL);
if(title == NULL){
printk("Failed to allocate buffer for xterm title\n");
return base;
}
snprintf(title, len, "%s (%s)", base, umid);
return title;
}