linux-kernel-test/drivers/usb
Sarah Sharp e04748e3a8 USB: Push scatter gather lists down to host controller drivers.
This is the original patch I created before David Vrabel posted a better
patch (http://marc.info/?l=linux-usb&m=123377477209109&w=2) that does
basically the same thing.  This patch will get replaced with his
(modified) patch later.

Allow USB device drivers that use usb_sg_init() and usb_sg_wait() to push
bulk endpoint scatter gather lists down to the host controller drivers.
This allows host controller drivers to more efficiently enqueue these
transfers, and allows the xHCI host controller to better take advantage of
USB 3.0 "bursts" for bulk endpoints.

This patch currently only enables scatter gather lists for bulk endpoints.
Other endpoint types that use the usb_sg_* functions will not have their
scatter gather lists pushed down to the host controller.  For periodic
endpoints, we want each scatterlist entry to be a separate transfer.
Eventually, HCDs could parse these scatter-gather lists for periodic
endpoints also.  For now, we use the old code and call usb_submit_urb()
for each scatterlist entry.

The caller of usb_sg_init() can request that all bytes in the scatter
gather list be transferred by passing in a length of zero.  Handle that
request for a bulk endpoint under xHCI by walking the scatter gather list
and calculating the length.  We could let the HCD handle a zero length in
this case, but I'm not sure if the core layers in between will get
confused by this.

Signed-off-by: Sarah Sharp <sarah.a.sharp@linux.intel.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
2009-06-15 21:44:49 -07:00
..
atm USB: cxacru: Fix negative dB output 2009-05-08 19:34:56 -07:00
c67x00 usb/c67x00 endianness annotations 2008-06-04 08:06:01 -07:00
class USB: usbtmc: fix switch statment 2009-06-15 21:44:48 -07:00
core USB: Push scatter gather lists down to host controller drivers. 2009-06-15 21:44:49 -07:00
gadget USB: atmel_usba_udc: change way of specifying bias function 2009-06-15 21:44:47 -07:00
host USB: xhci: Bulk transfer support 2009-06-15 21:44:49 -07:00
image USB: replace uses of __constant_{endian} 2009-03-24 16:20:33 -07:00
misc USB: usbtest fix endless loop in unlink tests. 2009-06-15 21:44:48 -07:00
mon USB: usbmon: use the new usb debugfs directory 2009-06-15 21:44:43 -07:00
musb usb: musb: disable OTG AUTOIDLE only with omap3430 2009-06-15 21:44:46 -07:00
otg USB: Add Intel Langwell USB OTG Transceiver Drive 2009-06-15 21:44:47 -07:00
serial USB: usb-serial: replace shutdown with disconnect, release 2009-06-15 21:44:47 -07:00
storage USB: usb-storage: add filter to "option_ms" to leave unrecognized devices alone 2009-06-15 21:44:46 -07:00
wusbcore WUSB: correct format of wusb_chid sysfs file 2009-04-17 10:50:29 -07:00
Kconfig usb: return device strings in UTF-8 2009-06-15 21:44:43 -07:00
Makefile Revert "USB: Correct Makefile to make isp1760 buildable" 2009-05-28 13:54:43 -07:00
README
usb-skeleton.c USB: skeleton: Use dev_info instead of info 2009-03-24 16:20:30 -07:00

To understand all the Linux-USB framework, you'll use these resources:

    * This source code.  This is necessarily an evolving work, and
      includes kerneldoc that should help you get a current overview.
      ("make pdfdocs", and then look at "usb.pdf" for host side and
      "gadget.pdf" for peripheral side.)  Also, Documentation/usb has
      more information.

    * The USB 2.0 specification (from www.usb.org), with supplements
      such as those for USB OTG and the various device classes.
      The USB specification has a good overview chapter, and USB
      peripherals conform to the widely known "Chapter 9".

    * Chip specifications for USB controllers.  Examples include
      host controllers (on PCs, servers, and more); peripheral
      controllers (in devices with Linux firmware, like printers or
      cell phones); and hard-wired peripherals like Ethernet adapters.

    * Specifications for other protocols implemented by USB peripheral
      functions.  Some are vendor-specific; others are vendor-neutral
      but just standardized outside of the www.usb.org team.

Here is a list of what each subdirectory here is, and what is contained in
them.

core/		- This is for the core USB host code, including the
		  usbfs files and the hub class driver ("khubd").

host/		- This is for USB host controller drivers.  This
		  includes UHCI, OHCI, EHCI, and others that might
		  be used with more specialized "embedded" systems.

gadget/		- This is for USB peripheral controller drivers and
		  the various gadget drivers which talk to them.


Individual USB driver directories.  A new driver should be added to the
first subdirectory in the list below that it fits into.

image/		- This is for still image drivers, like scanners or
		  digital cameras.
../input/	- This is for any driver that uses the input subsystem,
		  like keyboard, mice, touchscreens, tablets, etc.
../media/	- This is for multimedia drivers, like video cameras,
		  radios, and any other drivers that talk to the v4l
		  subsystem.
../net/		- This is for network drivers.
serial/		- This is for USB to serial drivers.
storage/	- This is for USB mass-storage drivers.
class/		- This is for all USB device drivers that do not fit
		  into any of the above categories, and work for a range
		  of USB Class specified devices. 
misc/		- This is for all USB device drivers that do not fit
		  into any of the above categories.