MIPS: PNX833x: Remove checks for CONFIG_I2C_PNX0105

Checks for CONFIG_I2C_PNX0105 were added in v2.6.28. But the related
Kconfig symbol has not been added to the tree. Remove these checks.

Signed-off-by: Paul Bolle <pebolle@tiscali.nl>
Cc: linux-mips@linux-mips.org
Cc: linux-kernel@vger.kernel.org
Patchwork: https://patchwork.linux-mips.org/patch/6958/
Signed-off-by: Ralf Baechle <ralf@linux-mips.org>
This commit is contained in:
Paul Bolle 2014-05-20 13:42:03 +02:00 committed by Ralf Baechle
parent 261cbc97ab
commit 23634fd3ae

View File

@ -33,11 +33,6 @@
#include <linux/mtd/nand.h>
#include <linux/mtd/partitions.h>
#ifdef CONFIG_I2C_PNX0105
/* Until i2c driver available in kernel.*/
#include <linux/i2c-pnx0105.h>
#endif
#include <irq.h>
#include <irq-mapping.h>
#include <pnx833x.h>
@ -134,70 +129,6 @@ static struct platform_device pnx833x_usb_ehci_device = {
.resource = pnx833x_usb_ehci_resources,
};
#ifdef CONFIG_I2C_PNX0105
static struct resource pnx833x_i2c0_resources[] = {
{
.start = PNX833X_I2C0_PORTS_START,
.end = PNX833X_I2C0_PORTS_END,
.flags = IORESOURCE_MEM,
},
{
.start = PNX833X_PIC_I2C0_INT,
.end = PNX833X_PIC_I2C0_INT,
.flags = IORESOURCE_IRQ,
},
};
static struct resource pnx833x_i2c1_resources[] = {
{
.start = PNX833X_I2C1_PORTS_START,
.end = PNX833X_I2C1_PORTS_END,
.flags = IORESOURCE_MEM,
},
{
.start = PNX833X_PIC_I2C1_INT,
.end = PNX833X_PIC_I2C1_INT,
.flags = IORESOURCE_IRQ,
},
};
static struct i2c_pnx0105_dev pnx833x_i2c_dev[] = {
{
.base = PNX833X_I2C0_PORTS_START,
.irq = -1, /* should be PNX833X_PIC_I2C0_INT but polling is faster */
.clock = 6, /* 0 == 400 kHz, 4 == 100 kHz(Maximum HDMI), 6 = 50kHz(Preferred HDCP) */
.bus_addr = 0, /* no slave support */
},
{
.base = PNX833X_I2C1_PORTS_START,
.irq = -1, /* on high freq, polling is faster */
/*.irq = PNX833X_PIC_I2C1_INT,*/
.clock = 4, /* 0 == 400 kHz, 4 == 100 kHz. 100 kHz seems a safe default for now */
.bus_addr = 0, /* no slave support */
},
};
static struct platform_device pnx833x_i2c0_device = {
.name = "i2c-pnx0105",
.id = 0,
.dev = {
.platform_data = &pnx833x_i2c_dev[0],
},
.num_resources = ARRAY_SIZE(pnx833x_i2c0_resources),
.resource = pnx833x_i2c0_resources,
};
static struct platform_device pnx833x_i2c1_device = {
.name = "i2c-pnx0105",
.id = 1,
.dev = {
.platform_data = &pnx833x_i2c_dev[1],
},
.num_resources = ARRAY_SIZE(pnx833x_i2c1_resources),
.resource = pnx833x_i2c1_resources,
};
#endif
static u64 ethernet_dmamask = DMA_BIT_MASK(32);
static struct resource pnx833x_ethernet_resources[] = {
@ -294,10 +225,6 @@ static struct platform_device pnx833x_flash_nand = {
static struct platform_device *pnx833x_platform_devices[] __initdata = {
&pnx833x_uart_device,
&pnx833x_usb_ehci_device,
#ifdef CONFIG_I2C_PNX0105
&pnx833x_i2c0_device,
&pnx833x_i2c1_device,
#endif
&pnx833x_ethernet_device,
&pnx833x_sata_device,
&pnx833x_flash_nand,