lk/linux-kernel-test
1
0
Fork 0
Code Issues Pull Requests Releases Wiki Activity

staging: comedi: amplc_dio200: reformat driver comment

Browse Source 
Reformat the driver description comment to use the preferred block
comment style so that future changes are acceptable to the checkpatch.pl
script.

Signed-off-by: Ian Abbott <abbotti@mev.co.uk>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
This commit is contained in:
Ian Abbott
2012-10-24 16:47:45 +01:00
committed by Greg Kroah-Hartman
parent 5d380bebe7
commit 41b25f8714
1 changed files with 179 additions and 179 deletions
Download Patch File Download Diff File Expand all files Collapse all files

358
drivers/staging/comedi/drivers/amplc_dio200.c
View File

@@ -25,185 +25,185 @@
*/
/*
Driver: amplc_dio200
Description: Amplicon 200 Series Digital I/O
Author: Ian Abbott <abbotti@mev.co.uk>
Devices: [Amplicon] PC212E (pc212e), PC214E (pc214e), PC215E (pc215e),
PCI215 (pci215 or amplc_dio200), PC218E (pc218e), PC272E (pc272e),
PCI272 (pci272 or amplc_dio200)
Updated: Wed, 22 Oct 2008 13:36:02 +0100
Status: works
Configuration options - PC212E, PC214E, PC215E, PC218E, PC272E:
[0] - I/O port base address
[1] - IRQ (optional, but commands won't work without it)
Configuration options - PCI215, PCI272:
[0] - PCI bus of device (optional)
[1] - PCI slot of device (optional)
If bus/slot is not specified, the first available PCI device will
be used.
Passing a zero for an option is the same as leaving it unspecified.
SUBDEVICES
PC218E PC212E PC215E/PCI215
------------- ------------- -------------
Subdevices 7 6 5
0 CTR-X1 PPI-X PPI-X
1 CTR-X2 CTR-Y1 PPI-Y
2 CTR-Y1 CTR-Y2 CTR-Z1
3 CTR-Y2 CTR-Z1 CTR-Z2
4 CTR-Z1 CTR-Z2 INTERRUPT
5 CTR-Z2 INTERRUPT
6 INTERRUPT
PC214E PC272E/PCI272
------------- -------------
Subdevices 4 4
0 PPI-X PPI-X
1 PPI-Y PPI-Y
2 CTR-Z1* PPI-Z
3 INTERRUPT* INTERRUPT
Each PPI is a 8255 chip providing 24 DIO channels. The DIO channels
are configurable as inputs or outputs in four groups:
Port A - channels 0 to 7
Port B - channels 8 to 15
Port CL - channels 16 to 19
Port CH - channels 20 to 23
Only mode 0 of the 8255 chips is supported.
Each CTR is a 8254 chip providing 3 16-bit counter channels. Each
channel is configured individually with INSN_CONFIG instructions. The
specific type of configuration instruction is specified in data[0].
Some configuration instructions expect an additional parameter in
data[1]; others return a value in data[1]. The following configuration
instructions are supported:
INSN_CONFIG_SET_COUNTER_MODE. Sets the counter channel's mode and
BCD/binary setting specified in data[1].
INSN_CONFIG_8254_READ_STATUS. Reads the status register value for the
counter channel into data[1].
INSN_CONFIG_SET_CLOCK_SRC. Sets the counter channel's clock source as
specified in data[1] (this is a hardware-specific value). Not
supported on PC214E. For the other boards, valid clock sources are
0 to 7 as follows:
0. CLK n, the counter channel's dedicated CLK input from the SK1
connector. (N.B. for other values, the counter channel's CLKn
pin on the SK1 connector is an output!)
1. Internal 10 MHz clock.
2. Internal 1 MHz clock.
3. Internal 100 kHz clock.
4. Internal 10 kHz clock.
5. Internal 1 kHz clock.
6. OUT n-1, the output of counter channel n-1 (see note 1 below).
7. Ext Clock, the counter chip's dedicated Ext Clock input from
the SK1 connector. This pin is shared by all three counter
channels on the chip.
INSN_CONFIG_GET_CLOCK_SRC. Returns the counter channel's current
clock source in data[1]. For internal clock sources, data[2] is set
to the period in ns.
INSN_CONFIG_SET_GATE_SRC. Sets the counter channel's gate source as
specified in data[2] (this is a hardware-specific value). Not
supported on PC214E. For the other boards, valid gate sources are 0
to 7 as follows:
0. VCC (internal +5V d.c.), i.e. gate permanently enabled.
1. GND (internal 0V d.c.), i.e. gate permanently disabled.
2. GAT n, the counter channel's dedicated GAT input from the SK1
connector. (N.B. for other values, the counter channel's GATn
pin on the SK1 connector is an output!)
3. /OUT n-2, the inverted output of counter channel n-2 (see note
2 below).
4. Reserved.
5. Reserved.
6. Reserved.
7. Reserved.
INSN_CONFIG_GET_GATE_SRC. Returns the counter channel's current gate
source in data[2].
Clock and gate interconnection notes:
1. Clock source OUT n-1 is the output of the preceding channel on the
same counter subdevice if n > 0, or the output of channel 2 on the
preceding counter subdevice (see note 3) if n = 0.
2. Gate source /OUT n-2 is the inverted output of channel 0 on the
same counter subdevice if n = 2, or the inverted output of channel n+1
on the preceding counter subdevice (see note 3) if n < 2.
3. The counter subdevices are connected in a ring, so the highest
counter subdevice precedes the lowest.
The 'INTERRUPT' subdevice pretends to be a digital input subdevice. The
digital inputs come from the interrupt status register. The number of
channels matches the number of interrupt sources. The PC214E does not
have an interrupt status register; see notes on 'INTERRUPT SOURCES'
below.
INTERRUPT SOURCES
PC218E PC212E PC215E/PCI215
------------- ------------- -------------
Sources 6 6 6
0 CTR-X1-OUT PPI-X-C0 PPI-X-C0
1 CTR-X2-OUT PPI-X-C3 PPI-X-C3
2 CTR-Y1-OUT CTR-Y1-OUT PPI-Y-C0
3 CTR-Y2-OUT CTR-Y2-OUT PPI-Y-C3
4 CTR-Z1-OUT CTR-Z1-OUT CTR-Z1-OUT
5 CTR-Z2-OUT CTR-Z2-OUT CTR-Z2-OUT
PC214E PC272E/PCI272
------------- -------------
Sources 1 6
0 JUMPER-J5 PPI-X-C0
1 PPI-X-C3
2 PPI-Y-C0
3 PPI-Y-C3
4 PPI-Z-C0
5 PPI-Z-C3
When an interrupt source is enabled in the interrupt source enable
register, a rising edge on the source signal latches the corresponding
bit to 1 in the interrupt status register.
When the interrupt status register value as a whole (actually, just the
6 least significant bits) goes from zero to non-zero, the board will
generate an interrupt. For level-triggered hardware interrupts (PCI
card), the interrupt will remain asserted until the interrupt status
register is cleared to zero. For edge-triggered hardware interrupts
(ISA card), no further interrupts will occur until the interrupt status
register is cleared to zero. To clear a bit to zero in the interrupt
status register, the corresponding interrupt source must be disabled
in the interrupt source enable register (there is no separate interrupt
clear register).
The PC214E does not have an interrupt source enable register or an
interrupt status register; its 'INTERRUPT' subdevice has a single
channel and its interrupt source is selected by the position of jumper
J5.
COMMANDS
The driver supports a read streaming acquisition command on the
'INTERRUPT' subdevice. The channel list selects the interrupt sources
to be enabled. All channels will be sampled together (convert_src ==
TRIG_NOW). The scan begins a short time after the hardware interrupt
occurs, subject to interrupt latencies (scan_begin_src == TRIG_EXT,
scan_begin_arg == 0). The value read from the interrupt status register
is packed into a short value, one bit per requested channel, in the
order they appear in the channel list.
*/
* Driver: amplc_dio200
* Description: Amplicon 200 Series Digital I/O
* Author: Ian Abbott <abbotti@mev.co.uk>
* Devices: [Amplicon] PC212E (pc212e), PC214E (pc214e), PC215E (pc215e),
* PCI215 (pci215 or amplc_dio200), PC218E (pc218e), PC272E (pc272e),
* PCI272 (pci272 or amplc_dio200)
* Updated: Wed, 22 Oct 2008 13:36:02 +0100
* Status: works
*
* Configuration options - PC212E, PC214E, PC215E, PC218E, PC272E:
* [0] - I/O port base address
* [1] - IRQ (optional, but commands won't work without it)
*
* Configuration options - PCI215, PCI272:
* [0] - PCI bus of device (optional)
* [1] - PCI slot of device (optional)
* If bus/slot is not specified, the first available PCI device will
* be used.
*
* Passing a zero for an option is the same as leaving it unspecified.
*
* SUBDEVICES
*
* PC218E PC212E PC215E/PCI215
* ------------- ------------- -------------
* Subdevices 7 6 5
* 0 CTR-X1 PPI-X PPI-X
* 1 CTR-X2 CTR-Y1 PPI-Y
* 2 CTR-Y1 CTR-Y2 CTR-Z1
* 3 CTR-Y2 CTR-Z1 CTR-Z2
* 4 CTR-Z1 CTR-Z2 INTERRUPT
* 5 CTR-Z2 INTERRUPT
* 6 INTERRUPT
*
* PC214E PC272E/PCI272
* ------------- -------------
* Subdevices 4 4
* 0 PPI-X PPI-X
* 1 PPI-Y PPI-Y
* 2 CTR-Z1* PPI-Z
* 3 INTERRUPT* INTERRUPT
*
* Each PPI is a 8255 chip providing 24 DIO channels. The DIO channels
* are configurable as inputs or outputs in four groups:
*
* Port A - channels 0 to 7
* Port B - channels 8 to 15
* Port CL - channels 16 to 19
* Port CH - channels 20 to 23
*
* Only mode 0 of the 8255 chips is supported.
*
* Each CTR is a 8254 chip providing 3 16-bit counter channels. Each
* channel is configured individually with INSN_CONFIG instructions. The
* specific type of configuration instruction is specified in data[0].
* Some configuration instructions expect an additional parameter in
* data[1]; others return a value in data[1]. The following configuration
* instructions are supported:
*
* INSN_CONFIG_SET_COUNTER_MODE. Sets the counter channel's mode and
* BCD/binary setting specified in data[1].
*
* INSN_CONFIG_8254_READ_STATUS. Reads the status register value for the
* counter channel into data[1].
*
* INSN_CONFIG_SET_CLOCK_SRC. Sets the counter channel's clock source as
* specified in data[1] (this is a hardware-specific value). Not
* supported on PC214E. For the other boards, valid clock sources are
* 0 to 7 as follows:
*
* 0. CLK n, the counter channel's dedicated CLK input from the SK1
* connector. (N.B. for other values, the counter channel's CLKn
* pin on the SK1 connector is an output!)
* 1. Internal 10 MHz clock.
* 2. Internal 1 MHz clock.
* 3. Internal 100 kHz clock.
* 4. Internal 10 kHz clock.
* 5. Internal 1 kHz clock.
* 6. OUT n-1, the output of counter channel n-1 (see note 1 below).
* 7. Ext Clock, the counter chip's dedicated Ext Clock input from
* the SK1 connector. This pin is shared by all three counter
* channels on the chip.
*
* INSN_CONFIG_GET_CLOCK_SRC. Returns the counter channel's current
* clock source in data[1]. For internal clock sources, data[2] is set
* to the period in ns.
*
* INSN_CONFIG_SET_GATE_SRC. Sets the counter channel's gate source as
* specified in data[2] (this is a hardware-specific value). Not
* supported on PC214E. For the other boards, valid gate sources are 0
* to 7 as follows:
*
* 0. VCC (internal +5V d.c.), i.e. gate permanently enabled.
* 1. GND (internal 0V d.c.), i.e. gate permanently disabled.
* 2. GAT n, the counter channel's dedicated GAT input from the SK1
* connector. (N.B. for other values, the counter channel's GATn
* pin on the SK1 connector is an output!)
* 3. /OUT n-2, the inverted output of counter channel n-2 (see note
* 2 below).
* 4. Reserved.
* 5. Reserved.
* 6. Reserved.
* 7. Reserved.
*
* INSN_CONFIG_GET_GATE_SRC. Returns the counter channel's current gate
* source in data[2].
*
* Clock and gate interconnection notes:
*
* 1. Clock source OUT n-1 is the output of the preceding channel on the
* same counter subdevice if n > 0, or the output of channel 2 on the
* preceding counter subdevice (see note 3) if n = 0.
*
* 2. Gate source /OUT n-2 is the inverted output of channel 0 on the
* same counter subdevice if n = 2, or the inverted output of channel n+1
* on the preceding counter subdevice (see note 3) if n < 2.
*
* 3. The counter subdevices are connected in a ring, so the highest
* counter subdevice precedes the lowest.
*
* The 'INTERRUPT' subdevice pretends to be a digital input subdevice. The
* digital inputs come from the interrupt status register. The number of
* channels matches the number of interrupt sources. The PC214E does not
* have an interrupt status register; see notes on 'INTERRUPT SOURCES'
* below.
*
* INTERRUPT SOURCES
*
* PC218E PC212E PC215E/PCI215
* ------------- ------------- -------------
* Sources 6 6 6
* 0 CTR-X1-OUT PPI-X-C0 PPI-X-C0
* 1 CTR-X2-OUT PPI-X-C3 PPI-X-C3
* 2 CTR-Y1-OUT CTR-Y1-OUT PPI-Y-C0
* 3 CTR-Y2-OUT CTR-Y2-OUT PPI-Y-C3
* 4 CTR-Z1-OUT CTR-Z1-OUT CTR-Z1-OUT
* 5 CTR-Z2-OUT CTR-Z2-OUT CTR-Z2-OUT
*
* PC214E PC272E/PCI272
* ------------- -------------
* Sources 1 6
* 0 JUMPER-J5 PPI-X-C0
* 1 PPI-X-C3
* 2 PPI-Y-C0
* 3 PPI-Y-C3
* 4 PPI-Z-C0
* 5 PPI-Z-C3
*
* When an interrupt source is enabled in the interrupt source enable
* register, a rising edge on the source signal latches the corresponding
* bit to 1 in the interrupt status register.
*
* When the interrupt status register value as a whole (actually, just the
* 6 least significant bits) goes from zero to non-zero, the board will
* generate an interrupt. For level-triggered hardware interrupts (PCI
* card), the interrupt will remain asserted until the interrupt status
* register is cleared to zero. For edge-triggered hardware interrupts
* (ISA card), no further interrupts will occur until the interrupt status
* register is cleared to zero. To clear a bit to zero in the interrupt
* status register, the corresponding interrupt source must be disabled
* in the interrupt source enable register (there is no separate interrupt
* clear register).
*
* The PC214E does not have an interrupt source enable register or an
* interrupt status register; its 'INTERRUPT' subdevice has a single
* channel and its interrupt source is selected by the position of jumper
* J5.
*
* COMMANDS
*
* The driver supports a read streaming acquisition command on the
* 'INTERRUPT' subdevice. The channel list selects the interrupt sources
* to be enabled. All channels will be sampled together (convert_src ==
* TRIG_NOW). The scan begins a short time after the hardware interrupt
* occurs, subject to interrupt latencies (scan_begin_src == TRIG_EXT,
* scan_begin_arg == 0). The value read from the interrupt status register
* is packed into a short value, one bit per requested channel, in the
* order they appear in the channel list.
*/
#include <linux/interrupt.h>
#include <linux/slab.h>