[ARM] 3963/1: AT91: Update configuration files

A number of configuration file changes.

These are mainly to replace references to ARCH_AT91RM9200 and
ARCH_AT91SAM9261 with the common/generic ARCH_AT91.  That way we don't
need to mention every specific AT91 processor explicitly.

Also adds the configuration option for AT91SAM9260-EK and AT91SAM9261-EK
boards.

Signed-off-by: Andrew Victor <andrew@sanpeople.com>
Signed-off-by: Russell King <rmk+kernel@arm.linux.org.uk>
This commit is contained in:
Andrew Victor 2006-12-01 14:51:13 +01:00 committed by Russell King
parent 022cbd7376
commit 58a0cd7887
9 changed files with 42 additions and 13 deletions

View File

@ -583,7 +583,7 @@ config LEDS
ARCH_LUBBOCK || MACH_MAINSTONE || ARCH_NETWINDER || \
ARCH_OMAP || ARCH_P720T || ARCH_PXA_IDP || \
ARCH_SA1100 || ARCH_SHARK || ARCH_VERSATILE || \
ARCH_AT91RM9200 || MACH_TRIZEPS4
ARCH_AT91 || MACH_TRIZEPS4
help
If you say Y here, the LEDs on your machine will be used
to provide useful information about your current system status.

View File

@ -623,7 +623,7 @@ CONFIG_AT91RM9200_WATCHDOG=y
# CONFIG_USBPCWATCHDOG is not set
# CONFIG_NVRAM is not set
CONFIG_RTC=y
# CONFIG_AT91_RTC is not set
# CONFIG_AT91RM9200_RTC is not set
# CONFIG_DTLK is not set
# CONFIG_R3964 is not set

View File

@ -437,7 +437,7 @@ CONFIG_LEGACY_PTY_COUNT=256
# CONFIG_WATCHDOG is not set
# CONFIG_NVRAM is not set
# CONFIG_RTC is not set
# CONFIG_AT91_RTC is not set
# CONFIG_AT91RM9200_RTC is not set
# CONFIG_DTLK is not set
# CONFIG_R3964 is not set

View File

@ -92,6 +92,13 @@ if ARCH_AT91SAM9260
comment "AT91SAM9260 Board Type"
config MACH_AT91SAM9260EK
bool "Atmel AT91SAM9260-EK Evaluation Kit"
depends on ARCH_AT91SAM9260
help
Select this if you are using Atmel's AT91SAM9260-EK Evaluation Kit.
<http://www.atmel.com/dyn/products/tools_card.asp?tool_id=3933>
endif
# ----------------------------------------------------------
@ -100,8 +107,31 @@ if ARCH_AT91SAM9261
comment "AT91SAM9261 Board Type"
config MACH_AT91SAM9261EK
bool "Atmel AT91SAM9261-EK Evaluation Kit"
depends on ARCH_AT91SAM9261
help
Select this if you are using Atmel's AT91SAM9261-EK Evaluation Kit.
<http://www.atmel.com/dyn/products/tools_card.asp?tool_id=3820>
endif
# ----------------------------------------------------------
comment "AT91 Board Options"
config MTD_AT91_DATAFLASH_CARD
bool "Enable DataFlash Card support"
depends on (ARCH_AT91RM9200DK || MACH_AT91RM9200EK || MACH_AT91SAM9260EK || MACH_AT91SAM9261EK)
help
Enable support for the DataFlash card.
config MTD_NAND_AT91_BUSWIDTH_16
bool "Enable 16-bit data bus interface to NAND flash"
depends on (MACH_AT91SAM9261EK || MACH_AT91SAM9260EK)
help
On AT91SAM926x boards both types of NAND flash can be present
(8 and 16 bit data bus width).
# ----------------------------------------------------------

View File

@ -91,11 +91,11 @@ config MMC_AU1X
If unsure, say N.
config MMC_AT91RM9200
tristate "AT91RM9200 SD/MMC Card Interface support"
depends on ARCH_AT91RM9200 && MMC
config MMC_AT91
tristate "AT91 SD/MMC Card Interface support"
depends on ARCH_AT91 && MMC
help
This selects the AT91RM9200 MCI controller.
This selects the AT91 MCI controller.
If unsure, say N.

View File

@ -22,7 +22,7 @@ obj-$(CONFIG_MMC_SDHCI) += sdhci.o
obj-$(CONFIG_MMC_WBSD) += wbsd.o
obj-$(CONFIG_MMC_AU1X) += au1xmmc.o
obj-$(CONFIG_MMC_OMAP) += omap.o
obj-$(CONFIG_MMC_AT91RM9200) += at91_mci.o
obj-$(CONFIG_MMC_AT91) += at91_mci.o
obj-$(CONFIG_MMC_TIFM_SD) += tifm_sd.o
mmc_core-y := mmc.o mmc_sysfs.o

View File

@ -24,7 +24,7 @@ config USB_ARCH_HAS_OHCI
default y if ARCH_S3C2410
default y if PXA27x
default y if ARCH_EP93XX
default y if (ARCH_AT91RM9200 || ARCH_AT91SAM9261)
default y if ARCH_AT91
default y if ARCH_PNX4008
# PPC:
default y if STB03xxx

View File

@ -189,7 +189,7 @@ config USB_OTG
config USB_GADGET_AT91
boolean "AT91 USB Device Port"
depends on ARCH_AT91RM9200
depends on ARCH_AT91
select USB_GADGET_SELECTED
help
Many Atmel AT91 processors (such as the AT91RM2000) have a

View File

@ -935,7 +935,7 @@ MODULE_LICENSE ("GPL");
#include "ohci-ppc-soc.c"
#endif
#if defined(CONFIG_ARCH_AT91RM9200) || defined(CONFIG_ARCH_AT91SAM9261)
#ifdef CONFIG_ARCH_AT91
#include "ohci-at91.c"
#endif
@ -952,8 +952,7 @@ MODULE_LICENSE ("GPL");
|| defined (CONFIG_ARCH_EP93XX) \
|| defined (CONFIG_SOC_AU1X00) \
|| defined (CONFIG_USB_OHCI_HCD_PPC_SOC) \
|| defined (CONFIG_ARCH_AT91RM9200) \
|| defined (CONFIG_ARCH_AT91SAM9261) \
|| defined (CONFIG_ARCH_AT91) \
|| defined (CONFIG_ARCH_PNX4008) \
)
#error "missing bus glue for ohci-hcd"