ARM: kirkwood: fix to retain gbe MAC addresses for DT kernels

The ethernet controller used on kirkwood looses its MAC address
register contents when the corresponding clock is gated. As soon as
mv643xx_eth is built as module, the clock gets gated and when loading
the module, the MAC address is gone.

Proper DT support for the mv643xx_eth driver is expected soon, so we add
a workaround to always enable ge0/ge1 clocks on kirkwood. This workaround
is also already used on non-DT kirkwood kernels.

Reported-by: Simon Baatz <gmbnomis@gmail.com>
Signed-off-by: Sebastian Hesselbarth <sebastian.hesselbarth@gmail.com>
Tested-by: Simon Baatz <gmbnomis@gmail.com>
Cc: <stable@vger.kernel.org>
Signed-off-by: Jason Cooper <jason@lakedaemon.net>
This commit is contained in:
Sebastian Hesselbarth 2013-01-30 21:29:58 +01:00 committed by Jason Cooper
parent 93fff4ce19
commit 7bf5b408b4

View File

@ -41,16 +41,12 @@ static void __init kirkwood_legacy_clk_init(void)
struct device_node *np = of_find_compatible_node(
NULL, NULL, "marvell,kirkwood-gating-clock");
struct of_phandle_args clkspec;
struct clk *clk;
clkspec.np = np;
clkspec.args_count = 1;
clkspec.args[0] = CGC_BIT_GE0;
orion_clkdev_add(NULL, "mv643xx_eth_port.0",
of_clk_get_from_provider(&clkspec));
clkspec.args[0] = CGC_BIT_PEX0;
orion_clkdev_add("0", "pcie",
of_clk_get_from_provider(&clkspec));
@ -59,9 +55,24 @@ static void __init kirkwood_legacy_clk_init(void)
orion_clkdev_add("1", "pcie",
of_clk_get_from_provider(&clkspec));
clkspec.args[0] = CGC_BIT_GE1;
orion_clkdev_add(NULL, "mv643xx_eth_port.1",
clkspec.args[0] = CGC_BIT_SDIO;
orion_clkdev_add(NULL, "mvsdio",
of_clk_get_from_provider(&clkspec));
/*
* The ethernet interfaces forget the MAC address assigned by
* u-boot if the clocks are turned off. Until proper DT support
* is available we always enable them for now.
*/
clkspec.args[0] = CGC_BIT_GE0;
clk = of_clk_get_from_provider(&clkspec);
orion_clkdev_add(NULL, "mv643xx_eth_port.0", clk);
clk_prepare_enable(clk);
clkspec.args[0] = CGC_BIT_GE1;
clk = of_clk_get_from_provider(&clkspec);
orion_clkdev_add(NULL, "mv643xx_eth_port.1", clk);
clk_prepare_enable(clk);
}
static void __init kirkwood_of_clk_init(void)