[PATCH] skge: remove XM phy (untested code)

Remove support for the non-Broadcom genesis based boards. The code
is untested, and probably won't work as is. The newer boards are all
Yukon based, and only old Genesis board I can find uses Broadcom.

Signed-off-by: Stephen Hemminger <shemminger@osdl.org>
This commit is contained in:
Stephen Hemminger 2005-06-27 11:33:10 -07:00 committed by Jeff Garzik
parent c506a50902
commit 89bf5f231f

View File

@ -621,16 +621,8 @@ static void skge_led_on(struct skge_hw *hw, int port)
skge_write32(hw, SK_REG(port, RX_LED_VAL), 100);
skge_write8(hw, SK_REG(port, RX_LED_CTRL), LED_START);
switch (hw->phy_type) {
case SK_PHY_BCOM:
xm_phy_write(hw, port, PHY_BCOM_P_EXT_CTRL,
PHY_B_PEC_LED_ON);
break;
default:
skge_write8(hw, SK_REG(port, TX_LED_TST), LED_T_ON);
skge_write32(hw, SK_REG(port, TX_LED_VAL), 100);
skge_write8(hw, SK_REG(port, TX_LED_CTRL), LED_START);
}
/* For Broadcom Phy only */
xm_phy_write(hw, port, PHY_BCOM_P_EXT_CTRL, PHY_B_PEC_LED_ON);
} else {
gm_phy_write(hw, port, PHY_MARV_LED_CTRL, 0);
gm_phy_write(hw, port, PHY_MARV_LED_OVER,
@ -651,15 +643,8 @@ static void skge_led_off(struct skge_hw *hw, int port)
skge_write32(hw, SK_REG(port, RX_LED_VAL), 0);
skge_write8(hw, SK_REG(port, RX_LED_CTRL), LED_T_OFF);
switch (hw->phy_type) {
case SK_PHY_BCOM:
xm_phy_write(hw, port, PHY_BCOM_P_EXT_CTRL,
PHY_B_PEC_LED_OFF);
break;
default:
skge_write32(hw, SK_REG(port, TX_LED_VAL), 0);
skge_write8(hw, SK_REG(port, TX_LED_CTRL), LED_T_OFF);
}
/* Broadcom only */
xm_phy_write(hw, port, PHY_BCOM_P_EXT_CTRL, PHY_B_PEC_LED_OFF);
} else {
gm_phy_write(hw, port, PHY_MARV_LED_CTRL, 0);
gm_phy_write(hw, port, PHY_MARV_LED_OVER,
@ -887,7 +872,8 @@ static u16 xm_phy_read(struct skge_hw *hw, int port, u16 reg)
xm_write16(hw, port, XM_PHY_ADDR, reg | hw->phy_addr);
v = xm_read16(hw, port, XM_PHY_DATA);
if (hw->phy_type != SK_PHY_XMAC) {
/* Need to wait for external PHY */
for (i = 0; i < PHY_RETRIES; i++) {
udelay(1);
if (xm_read16(hw, port, XM_MMU_CMD)
@ -900,7 +886,6 @@ static u16 xm_phy_read(struct skge_hw *hw, int port, u16 reg)
return 0;
ready:
v = xm_read16(hw, port, XM_PHY_DATA);
}
return v;
}
@ -913,7 +898,7 @@ static void xm_phy_write(struct skge_hw *hw, int port, u16 reg, u16 val)
for (i = 0; i < PHY_RETRIES; i++) {
if (!(xm_read16(hw, port, XM_MMU_CMD) & XM_MMU_PHY_BUSY))
goto ready;
cpu_relax();
udelay(1);
}
printk(KERN_WARNING PFX "%s: phy write failed to come ready\n",
hw->dev[port]->name);
@ -970,8 +955,7 @@ static void genesis_reset(struct skge_hw *hw, int port)
xm_write16(hw, port, XM_TX_CMD, 0); /* reset TX CMD Reg */
xm_write16(hw, port, XM_RX_CMD, 0); /* reset RX CMD Reg */
/* disable all PHY IRQs */
if (hw->phy_type == SK_PHY_BCOM)
/* disable Broadcom PHY IRQ */
xm_write16(hw, port, PHY_BCOM_INT_MASK, 0xffff);
xm_outhash(hw, port, XM_HSM, (u8 *) &zero);
@ -1020,7 +1004,8 @@ static void genesis_mac_init(struct skge_hw *hw, int port)
* GMII mode.
*/
spin_lock_bh(&hw->phy_lock);
if (hw->phy_type != SK_PHY_XMAC) {
/* External Phy Handling */
/* Take PHY out of reset. */
r = skge_read32(hw, B2_GP_IO);
if (port == 0)
@ -1066,7 +1051,7 @@ static void genesis_mac_init(struct skge_hw *hw, int port)
*/
r = xm_phy_read(hw, port, PHY_BCOM_AUX_CTRL);
xm_phy_write(hw, port, PHY_BCOM_AUX_CTRL, r | PHY_B_AC_DIS_PM);
}
/* Dummy read */
xm_read16(hw, port, XM_ISRC);
@ -1150,38 +1135,7 @@ static void genesis_mac_init(struct skge_hw *hw, int port)
else
xm_write16(hw, port, XM_RX_CMD, r & ~(XM_RX_BIG_PK_OK));
switch (hw->phy_type) {
case SK_PHY_XMAC:
if (skge->autoneg == AUTONEG_ENABLE) {
ctrl1 = PHY_X_AN_FD | PHY_X_AN_HD;
switch (skge->flow_control) {
case FLOW_MODE_NONE:
ctrl1 |= PHY_X_P_NO_PAUSE;
break;
case FLOW_MODE_LOC_SEND:
ctrl1 |= PHY_X_P_ASYM_MD;
break;
case FLOW_MODE_SYMMETRIC:
ctrl1 |= PHY_X_P_SYM_MD;
break;
case FLOW_MODE_REM_SEND:
ctrl1 |= PHY_X_P_BOTH_MD;
break;
}
xm_phy_write(hw, port, PHY_XMAC_AUNE_ADV, ctrl1);
ctrl2 = PHY_CT_ANE | PHY_CT_RE_CFG;
} else {
ctrl2 = 0;
if (skge->duplex == DUPLEX_FULL)
ctrl2 |= PHY_CT_DUP_MD;
}
xm_phy_write(hw, port, PHY_XMAC_CTRL, ctrl2);
break;
case SK_PHY_BCOM:
/* Broadcom phy initialization */
ctrl1 = PHY_CT_SP1000;
ctrl2 = 0;
ctrl3 = PHY_AN_CSMA;
@ -1237,8 +1191,6 @@ static void genesis_mac_init(struct skge_hw *hw, int port)
xm_phy_write(hw, port, PHY_BCOM_P_EXT_CTRL, ctrl4);
xm_phy_write(hw, port, PHY_BCOM_CTRL, ctrl1);
break;
}
spin_unlock_bh(&hw->phy_lock);
/* Clear MIB counters */
@ -1256,6 +1208,7 @@ static void genesis_stop(struct skge_port *skge)
{
struct skge_hw *hw = skge->hw;
int port = skge->port;
u32 reg;
/* Clear Tx packet arbiter timeout IRQ */
skge_write16(hw, B3_PA_CTRL,
@ -1273,9 +1226,7 @@ static void genesis_stop(struct skge_port *skge)
skge_write16(hw, SK_REG(port, TX_MFF_CTRL1), MFF_SET_MAC_RST);
/* For external PHYs there must be special handling */
if (hw->phy_type != SK_PHY_XMAC) {
u32 reg = skge_read32(hw, B2_GP_IO);
reg = skge_read32(hw, B2_GP_IO);
if (port == 0) {
reg |= GP_DIR_0;
reg &= ~GP_IO_0;
@ -1285,7 +1236,6 @@ static void genesis_stop(struct skge_port *skge)
}
skge_write32(hw, B2_GP_IO, reg);
skge_read32(hw, B2_GP_IO);
}
xm_write16(hw, port, XM_MMU_CMD,
xm_read16(hw, port, XM_MMU_CMD)
@ -1329,16 +1279,6 @@ static void genesis_mac_intr(struct skge_hw *hw, int port)
u16 status = xm_read16(hw, port, XM_ISRC);
pr_debug("genesis_intr status %x\n", status);
if (hw->phy_type == SK_PHY_XMAC) {
/* LInk down, start polling for state change */
if (status & XM_IS_INP_ASS) {
xm_write16(hw, port, XM_IMSK,
xm_read16(hw, port, XM_IMSK) | XM_IS_INP_ASS);
mod_timer(&skge->link_check, jiffies + LINK_POLL_HZ);
}
else if (status & XM_IS_AND)
mod_timer(&skge->link_check, jiffies + LINK_POLL_HZ);
}
if (status & XM_IS_TXF_UR) {
xm_write32(hw, port, XM_MODE, XM_MD_FTF);
@ -1458,18 +1398,17 @@ static void genesis_link_up(struct skge_port *skge)
xm_write32(hw, port, XM_MODE, mode);
msk = XM_DEF_MSK;
if (hw->phy_type != SK_PHY_XMAC)
msk |= XM_IS_INP_ASS; /* disable GP0 interrupt bit */
/* disable GP0 interrupt bit for external Phy */
msk |= XM_IS_INP_ASS;
xm_write16(hw, port, XM_IMSK, msk);
xm_read16(hw, port, XM_ISRC);
/* get MMU Command Reg. */
cmd = xm_read16(hw, port, XM_MMU_CMD);
if (hw->phy_type != SK_PHY_XMAC && skge->duplex == DUPLEX_FULL)
if (skge->duplex == DUPLEX_FULL)
cmd |= XM_MMU_GMII_FD;
if (hw->phy_type == SK_PHY_BCOM) {
/*
* Workaround BCOM Errata (#10523) for all BCom Phys
* Enable Power Management after link up
@ -1477,9 +1416,7 @@ static void genesis_link_up(struct skge_port *skge)
xm_phy_write(hw, port, PHY_BCOM_AUX_CTRL,
xm_phy_read(hw, port, PHY_BCOM_AUX_CTRL)
& ~PHY_B_AC_DIS_PM);
xm_phy_write(hw, port, PHY_BCOM_INT_MASK,
PHY_B_DEF_MSK);
}
xm_phy_write(hw, port, PHY_BCOM_INT_MASK, PHY_B_DEF_MSK);
/* enable Rx/Tx */
xm_write16(hw, port, XM_MMU_CMD,
@ -1551,25 +1488,12 @@ static void skge_link_timer(unsigned long __arg)
{
struct skge_port *skge = (struct skge_port *) __arg;
struct skge_hw *hw = skge->hw;
int port = skge->port;
if (hw->chip_id != CHIP_ID_GENESIS || !netif_running(skge->netdev))
return;
spin_lock_bh(&hw->phy_lock);
if (hw->phy_type == SK_PHY_BCOM)
genesis_bcom_intr(skge);
else {
int i;
for (i = 0; i < 3; i++)
if (xm_read16(hw, port, XM_ISRC) & XM_IS_INP_ASS)
break;
if (i == 3)
mod_timer(&skge->link_check, jiffies + LINK_POLL_HZ);
else
genesis_link_up(skge);
}
spin_unlock_bh(&hw->phy_lock);
}
@ -2737,7 +2661,7 @@ static void skge_extirq(unsigned long data)
if (hw->chip_id != CHIP_ID_GENESIS)
yukon_phy_intr(skge);
else if (hw->phy_type == SK_PHY_BCOM)
else
genesis_bcom_intr(skge);
}
}
@ -2886,9 +2810,6 @@ static int skge_reset(struct skge_hw *hw)
switch (hw->chip_id) {
case CHIP_ID_GENESIS:
switch (hw->phy_type) {
case SK_PHY_XMAC:
hw->phy_addr = PHY_ADDR_XMAC;
break;
case SK_PHY_BCOM:
hw->phy_addr = PHY_ADDR_BCOM;
break;