[ARM] locomo: allow cascaded IRQ base to be specified by platforms

Signed-off-by: Eric Miao <eric.y.miao@gmail.com>
This commit is contained in:
Eric Miao 2010-02-04 18:07:33 -08:00
parent 00dd8027b9
commit ac609d266e
6 changed files with 48 additions and 39 deletions

View File

@ -32,6 +32,12 @@
#include <asm/hardware/locomo.h>
/* LoCoMo Interrupts */
#define IRQ_LOCOMO_KEY (0)
#define IRQ_LOCOMO_GPIO (1)
#define IRQ_LOCOMO_LT (2)
#define IRQ_LOCOMO_SPI (3)
/* M62332 output channel selection */
#define M62332_EVR_CH 1 /* M62332 volume channel number */
/* 0 : CH.1 , 1 : CH. 2 */
@ -58,6 +64,7 @@ struct locomo {
struct device *dev;
unsigned long phys;
unsigned int irq;
int irq_base;
spinlock_t lock;
void __iomem *base;
#ifdef CONFIG_PM
@ -81,9 +88,7 @@ struct locomo_dev_info {
static struct locomo_dev_info locomo_devices[] = {
{
.devid = LOCOMO_DEVID_KEYBOARD,
.irq = {
IRQ_LOCOMO_KEY,
},
.irq = { IRQ_LOCOMO_KEY },
.name = "locomo-keyboard",
.offset = LOCOMO_KEYBOARD,
.length = 16,
@ -135,18 +140,18 @@ static struct locomo_dev_info locomo_devices[] = {
static void locomo_handler(unsigned int irq, struct irq_desc *desc)
{
struct locomo *lchip = get_irq_chip_data(irq);
int req, i;
void __iomem *mapbase = get_irq_chip_data(irq);
/* Acknowledge the parent IRQ */
desc->chip->ack(irq);
/* check why this interrupt was generated */
req = locomo_readl(mapbase + LOCOMO_ICR) & 0x0f00;
req = locomo_readl(lchip->base + LOCOMO_ICR) & 0x0f00;
if (req) {
/* generate the next interrupt(s) */
irq = IRQ_LOCOMO_KEY;
irq = lchip->irq_base;
for (i = 0; i <= 3; i++, irq++) {
if (req & (0x0100 << i)) {
generic_handle_irq(irq);
@ -162,20 +167,20 @@ static void locomo_ack_irq(unsigned int irq)
static void locomo_mask_irq(unsigned int irq)
{
void __iomem *mapbase = get_irq_chip_data(irq);
struct locomo *lchip = get_irq_chip_data(irq);
unsigned int r;
r = locomo_readl(mapbase + LOCOMO_ICR);
r &= ~(0x0010 << (irq - IRQ_LOCOMO_KEY));
locomo_writel(r, mapbase + LOCOMO_ICR);
r = locomo_readl(lchip->base + LOCOMO_ICR);
r &= ~(0x0010 << (irq - lchip->irq_base));
locomo_writel(r, lchip->base + LOCOMO_ICR);
}
static void locomo_unmask_irq(unsigned int irq)
{
void __iomem *mapbase = get_irq_chip_data(irq);
struct locomo *lchip = get_irq_chip_data(irq);
unsigned int r;
r = locomo_readl(mapbase + LOCOMO_ICR);
r |= (0x0010 << (irq - IRQ_LOCOMO_KEY));
locomo_writel(r, mapbase + LOCOMO_ICR);
r = locomo_readl(lchip->base + LOCOMO_ICR);
r |= (0x0010 << (irq - lchip->irq_base));
locomo_writel(r, lchip->base + LOCOMO_ICR);
}
static struct irq_chip locomo_chip = {
@ -187,21 +192,20 @@ static struct irq_chip locomo_chip = {
static void locomo_setup_irq(struct locomo *lchip)
{
int irq;
void __iomem *irqbase = lchip->base;
int irq = lchip->irq_base;
/*
* Install handler for IRQ_LOCOMO_HW.
*/
set_irq_type(lchip->irq, IRQ_TYPE_EDGE_FALLING);
set_irq_chip_data(lchip->irq, irqbase);
set_irq_chip_data(lchip->irq, lchip);
set_irq_chained_handler(lchip->irq, locomo_handler);
/* install handlers for IRQ_LOCOMO_* */
for (irq = IRQ_LOCOMO_KEY; irq < IRQ_LOCOMO_KEY + 4; irq++) {
/* Install handlers for IRQ_LOCOMO_* */
for ( ; irq <= lchip->irq_base + 3; irq++) {
set_irq_chip(irq, &locomo_chip);
set_irq_chip_data(irq, irqbase);
set_irq_handler(irq, handle_edge_irq);
set_irq_chip_data(irq, lchip);
set_irq_handler(irq, handle_level_irq);
set_irq_flags(irq, IRQF_VALID | IRQF_PROBE);
}
}
@ -248,7 +252,8 @@ locomo_init_one_child(struct locomo *lchip, struct locomo_dev_info *info)
dev->mapbase = 0;
dev->length = info->length;
memmove(dev->irq, info->irq, sizeof(dev->irq));
dev->irq[0] = (lchip->irq_base == NO_IRQ) ?
NO_IRQ : lchip->irq_base + info->irq[0];
ret = device_register(&dev->dev);
if (ret) {
@ -365,6 +370,7 @@ static int locomo_resume(struct platform_device *dev)
static int
__locomo_probe(struct device *me, struct resource *mem, int irq)
{
struct locomo_platform_data *pdata = me->platform_data;
struct locomo *lchip;
unsigned long r;
int i, ret = -ENODEV;
@ -380,6 +386,7 @@ __locomo_probe(struct device *me, struct resource *mem, int irq)
lchip->phys = mem->start;
lchip->irq = irq;
lchip->irq_base = (pdata) ? pdata->irq_base : NO_IRQ;
/*
* Map the whole region. This also maps the
@ -446,7 +453,7 @@ __locomo_probe(struct device *me, struct resource *mem, int irq)
* The interrupt controller must be initialised before any
* other device to ensure that the interrupts are available.
*/
if (lchip->irq != NO_IRQ)
if (lchip->irq != NO_IRQ && lchip->irq_base != NO_IRQ)
locomo_setup_irq(lchip);
for (i = 0; i < ARRAY_SIZE(locomo_devices); i++)

View File

@ -214,4 +214,8 @@ void locomo_m62332_senddata(struct locomo_dev *ldev, unsigned int dac_data, int
/* Frontlight control */
void locomo_frontlight_set(struct locomo_dev *dev, int duty, int vr, int bpwf);
struct locomo_platform_data {
int irq_base; /* IRQ base for cascaded on-chip IRQs */
};
#endif

View File

@ -247,12 +247,6 @@
#define BALLOON3_CODEC_IRQ IRQ_GPIO(BALLOON3_GPIO_CODEC_IRQ)
#define BALLOON3_S0_CD_IRQ IRQ_GPIO(BALLOON3_GPIO_S0_CD)
/* LoCoMo Interrupts (CONFIG_SHARP_LOCOMO) */
#define IRQ_LOCOMO_KEY (IRQ_BOARD_START + 0)
#define IRQ_LOCOMO_GPIO (IRQ_BOARD_START + 1)
#define IRQ_LOCOMO_LT (IRQ_BOARD_START + 2)
#define IRQ_LOCOMO_SPI (IRQ_BOARD_START + 3)
/* phyCORE-PXA270 (PCM027) Interrupts */
#define PCM027_IRQ(x) (IRQ_BOARD_START + (x))
#define PCM027_BTDET_IRQ PCM027_IRQ(0)

View File

@ -174,11 +174,18 @@ static struct resource locomo_resources[] = {
},
};
static struct locomo_platform_data locomo_info = {
.irq_base = IRQ_BOARD_START,
};
struct platform_device poodle_locomo_device = {
.name = "locomo",
.id = 0,
.num_resources = ARRAY_SIZE(locomo_resources),
.resource = locomo_resources,
.dev = {
.platform_data = &locomo_info,
},
};
EXPORT_SYMBOL(poodle_locomo_device);

View File

@ -234,6 +234,10 @@ static struct resource locomo_resources[] = {
},
};
static struct locomo_platform_data locomo_info = {
.irq_base = IRQ_BOARD_START,
};
struct platform_device collie_locomo_device = {
.name = "locomo",
.id = 0,

View File

@ -124,13 +124,13 @@
* Figure out the MAX IRQ number.
*
* If we have an SA1111, the max IRQ is S1_BVD1_STSCHG+1.
* If we have an LoCoMo, the max IRQ is IRQ_LOCOMO_SPI_TEND+1
* If we have an LoCoMo, the max IRQ is IRQ_BOARD_START + 4
* Otherwise, we have the standard IRQs only.
*/
#ifdef CONFIG_SA1111
#define NR_IRQS (IRQ_S1_BVD1_STSCHG + 1)
#elif defined(CONFIG_SHARP_LOCOMO)
#define NR_IRQS (IRQ_LOCOMO_SPI + 1)
#elif defined(CONFIG_SHARPSL_LOCOMO)
#define NR_IRQS (IRQ_BOARD_START + 4)
#else
#define NR_IRQS (IRQ_BOARD_START)
#endif
@ -142,10 +142,3 @@
#define IRQ_NEPONSET_SMC9196 (IRQ_BOARD_START + 0)
#define IRQ_NEPONSET_USAR (IRQ_BOARD_START + 1)
#define IRQ_NEPONSET_SA1111 (IRQ_BOARD_START + 2)
/* LoCoMo Interrupts (CONFIG_SHARP_LOCOMO) */
#define IRQ_LOCOMO_KEY (IRQ_BOARD_START + 0)
#define IRQ_LOCOMO_GPIO_BASE (IRQ_BOARD_START + 1)
#define IRQ_LOCOMO_LT_BASE (IRQ_BOARD_START + 2)
#define IRQ_LOCOMO_SPI_BASE (IRQ_BOARD_START + 3)