PCI: Fix typos and whitespace errors

Fix typos in drivers/pci.  Comment and whitespace changes only.

Signed-off-by: Bjorn Helgaas <bhelgaas@google.com>
Reviewed-by: Rafael J. Wysocki <rafael.j.wysocki@intel.com>
Reviewed-by: Randy Dunlap <rdunlap@infradead.org>
This commit is contained in:
Bjorn Helgaas 2019-05-30 08:05:58 -05:00
parent a188339ca5
commit f6b6aefee7
16 changed files with 41 additions and 40 deletions

View File

@ -432,7 +432,7 @@ EXPORT_SYMBOL_GPL(pci_prg_resp_pasid_required);
* @pdev: PCI device structure
*
* Returns negative value when PASID capability is not present.
* Otherwise it returns the numer of supported PASIDs.
* Otherwise it returns the number of supported PASIDs.
*/
int pci_max_pasids(struct pci_dev *pdev)
{

View File

@ -55,7 +55,7 @@ struct armada8k_pcie {
#define PCIE_ARUSER_REG (PCIE_VENDOR_REGS_OFFSET + 0x5C)
#define PCIE_AWUSER_REG (PCIE_VENDOR_REGS_OFFSET + 0x60)
/*
* AR/AW Cache defauls: Normal memory, Write-Back, Read / Write
* AR/AW Cache defaults: Normal memory, Write-Back, Read / Write
* allocate
*/
#define ARCACHE_DEFAULT_VALUE 0x3511

View File

@ -2,7 +2,7 @@
/*
* PCIe host controller driver for Kirin Phone SoCs
*
* Copyright (C) 2017 Hilisicon Electronics Co., Ltd.
* Copyright (C) 2017 HiSilicon Electronics Co., Ltd.
* http://www.huawei.com
*
* Author: Xiaowei Song <songxiaowei@huawei.com>

View File

@ -308,7 +308,7 @@ static void advk_pcie_setup_hw(struct advk_pcie *pcie)
advk_writel(pcie, PCIE_ISR1_ALL_MASK, PCIE_ISR1_MASK_REG);
/* Unmask all MSI's */
/* Unmask all MSIs */
advk_writel(pcie, 0, PCIE_MSI_MASK_REG);
/* Enable summary interrupt for GIC SPI source */

View File

@ -87,7 +87,7 @@ static int iproc_pcie_pltfm_probe(struct platform_device *pdev)
/*
* DT nodes are not used by all platforms that use the iProc PCIe
* core driver. For platforms that require explict inbound mapping
* core driver. For platforms that require explicit inbound mapping
* configuration, "dma-ranges" would have been present in DT
*/
pcie->need_ib_cfg = of_property_read_bool(np, "dma-ranges");

View File

@ -163,7 +163,7 @@ enum iproc_pcie_ib_map_type {
* @size_unit: inbound mapping region size unit, could be SZ_1K, SZ_1M, or
* SZ_1G
* @region_sizes: list of supported inbound mapping region sizes in KB, MB, or
* GB, depedning on the size unit
* GB, depending on the size unit
* @nr_sizes: number of supported inbound mapping region sizes
* @nr_windows: number of supported inbound mapping windows for the region
* @imap_addr_offset: register offset between the upper and lower 32-bit

View File

@ -627,7 +627,7 @@ static int vmd_enable_domain(struct vmd_dev *vmd, unsigned long features)
* 32-bit resources. __pci_assign_resource() enforces that
* artificial restriction to make sure everything will fit.
*
* The only way we could use a 64-bit non-prefechable MEMBAR is
* The only way we could use a 64-bit non-prefetchable MEMBAR is
* if its address is <4GB so that we can convert it to a 32-bit
* resource. To be visible to the host OS, all VMD endpoints must
* be initially configured by platform BIOS, which includes setting

View File

@ -73,7 +73,7 @@ int pci_mmap_resource_range(struct pci_dev *pdev, int bar,
#elif defined(HAVE_PCI_MMAP) /* && !ARCH_GENERIC_PCI_MMAP_RESOURCE */
/*
* Legacy setup: Impement pci_mmap_resource_range() as a wrapper around
* Legacy setup: Implement pci_mmap_resource_range() as a wrapper around
* the architecture's pci_mmap_page_range(), converting to "user visible"
* addresses as necessary.
*/

View File

@ -237,7 +237,7 @@ static void msi_set_mask_bit(struct irq_data *data, u32 flag)
}
/**
* pci_msi_mask_irq - Generic irq chip callback to mask PCI/MSI interrupts
* pci_msi_mask_irq - Generic IRQ chip callback to mask PCI/MSI interrupts
* @data: pointer to irqdata associated to that interrupt
*/
void pci_msi_mask_irq(struct irq_data *data)
@ -247,7 +247,7 @@ void pci_msi_mask_irq(struct irq_data *data)
EXPORT_SYMBOL_GPL(pci_msi_mask_irq);
/**
* pci_msi_unmask_irq - Generic irq chip callback to unmask PCI/MSI interrupts
* pci_msi_unmask_irq - Generic IRQ chip callback to unmask PCI/MSI interrupts
* @data: pointer to irqdata associated to that interrupt
*/
void pci_msi_unmask_irq(struct irq_data *data)
@ -588,11 +588,11 @@ static int msi_verify_entries(struct pci_dev *dev)
* msi_capability_init - configure device's MSI capability structure
* @dev: pointer to the pci_dev data structure of MSI device function
* @nvec: number of interrupts to allocate
* @affd: description of automatic irq affinity assignments (may be %NULL)
* @affd: description of automatic IRQ affinity assignments (may be %NULL)
*
* Setup the MSI capability structure of the device with the requested
* number of interrupts. A return value of zero indicates the successful
* setup of an entry with the new MSI irq. A negative return value indicates
* setup of an entry with the new MSI IRQ. A negative return value indicates
* an error, and a positive return value indicates the number of interrupts
* which could have been allocated.
*/
@ -609,7 +609,7 @@ static int msi_capability_init(struct pci_dev *dev, int nvec,
if (!entry)
return -ENOMEM;
/* All MSIs are unmasked by default, Mask them all */
/* All MSIs are unmasked by default; mask them all */
mask = msi_mask(entry->msi_attrib.multi_cap);
msi_mask_irq(entry, mask, mask);
@ -637,7 +637,7 @@ static int msi_capability_init(struct pci_dev *dev, int nvec,
return ret;
}
/* Set MSI enabled bits */
/* Set MSI enabled bits */
pci_intx_for_msi(dev, 0);
pci_msi_set_enable(dev, 1);
dev->msi_enabled = 1;
@ -729,11 +729,11 @@ static void msix_program_entries(struct pci_dev *dev,
* @dev: pointer to the pci_dev data structure of MSI-X device function
* @entries: pointer to an array of struct msix_entry entries
* @nvec: number of @entries
* @affd: Optional pointer to enable automatic affinity assignement
* @affd: Optional pointer to enable automatic affinity assignment
*
* Setup the MSI-X capability structure of device function with a
* single MSI-X irq. A return of zero indicates the successful setup of
* requested MSI-X entries with allocated irqs or non-zero for otherwise.
* single MSI-X IRQ. A return of zero indicates the successful setup of
* requested MSI-X entries with allocated IRQs or non-zero for otherwise.
**/
static int msix_capability_init(struct pci_dev *dev, struct msix_entry *entries,
int nvec, struct irq_affinity *affd)
@ -789,7 +789,7 @@ static int msix_capability_init(struct pci_dev *dev, struct msix_entry *entries,
out_avail:
if (ret < 0) {
/*
* If we had some success, report the number of irqs
* If we had some success, report the number of IRQs
* we succeeded in setting up.
*/
struct msi_desc *entry;
@ -812,7 +812,7 @@ static int msix_capability_init(struct pci_dev *dev, struct msix_entry *entries,
/**
* pci_msi_supported - check whether MSI may be enabled on a device
* @dev: pointer to the pci_dev data structure of MSI device function
* @nvec: how many MSIs have been requested ?
* @nvec: how many MSIs have been requested?
*
* Look at global flags, the device itself, and its parent buses
* to determine if MSI/-X are supported for the device. If MSI/-X is
@ -896,7 +896,7 @@ static void pci_msi_shutdown(struct pci_dev *dev)
/* Keep cached state to be restored */
__pci_msi_desc_mask_irq(desc, mask, ~mask);
/* Restore dev->irq to its default pin-assertion irq */
/* Restore dev->irq to its default pin-assertion IRQ */
dev->irq = desc->msi_attrib.default_irq;
pcibios_alloc_irq(dev);
}
@ -958,7 +958,7 @@ static int __pci_enable_msix(struct pci_dev *dev, struct msix_entry *entries,
}
}
/* Check whether driver already requested for MSI irq */
/* Check whether driver already requested for MSI IRQ */
if (dev->msi_enabled) {
pci_info(dev, "can't enable MSI-X (MSI IRQ already assigned)\n");
return -EINVAL;
@ -1026,7 +1026,7 @@ static int __pci_enable_msi_range(struct pci_dev *dev, int minvec, int maxvec,
if (!pci_msi_supported(dev, minvec))
return -EINVAL;
/* Check whether driver already requested MSI-X irqs */
/* Check whether driver already requested MSI-X IRQs */
if (dev->msix_enabled) {
pci_info(dev, "can't enable MSI (MSI-X already enabled)\n");
return -EINVAL;
@ -1113,8 +1113,8 @@ static int __pci_enable_msix_range(struct pci_dev *dev,
* pci_enable_msix_range - configure device's MSI-X capability structure
* @dev: pointer to the pci_dev data structure of MSI-X device function
* @entries: pointer to an array of MSI-X entries
* @minvec: minimum number of MSI-X irqs requested
* @maxvec: maximum number of MSI-X irqs requested
* @minvec: minimum number of MSI-X IRQs requested
* @maxvec: maximum number of MSI-X IRQs requested
*
* Setup the MSI-X capability structure of device function with a maximum
* possible number of interrupts in the range between @minvec and @maxvec
@ -1179,7 +1179,7 @@ int pci_alloc_irq_vectors_affinity(struct pci_dev *dev, unsigned int min_vecs,
return msi_vecs;
}
/* use legacy irq if allowed */
/* use legacy IRQ if allowed */
if (flags & PCI_IRQ_LEGACY) {
if (min_vecs == 1 && dev->irq) {
/*
@ -1248,7 +1248,7 @@ int pci_irq_vector(struct pci_dev *dev, unsigned int nr)
EXPORT_SYMBOL(pci_irq_vector);
/**
* pci_irq_get_affinity - return the affinity of a particular msi vector
* pci_irq_get_affinity - return the affinity of a particular MSI vector
* @dev: PCI device to operate on
* @nr: device-relative interrupt vector index (0-based).
*/
@ -1280,7 +1280,7 @@ const struct cpumask *pci_irq_get_affinity(struct pci_dev *dev, int nr)
EXPORT_SYMBOL(pci_irq_get_affinity);
/**
* pci_irq_get_node - return the numa node of a particular msi vector
* pci_irq_get_node - return the NUMA node of a particular MSI vector
* @pdev: PCI device to operate on
* @vec: device-relative interrupt vector index (0-based).
*/
@ -1330,7 +1330,7 @@ void pci_msi_domain_write_msg(struct irq_data *irq_data, struct msi_msg *msg)
/**
* pci_msi_domain_calc_hwirq - Generate a unique ID for an MSI source
* @dev: Pointer to the PCI device
* @desc: Pointer to the msi descriptor
* @desc: Pointer to the MSI descriptor
*
* The ID number is only used within the irqdomain.
*/
@ -1348,7 +1348,8 @@ static inline bool pci_msi_desc_is_multi_msi(struct msi_desc *desc)
}
/**
* pci_msi_domain_check_cap - Verify that @domain supports the capabilities for @dev
* pci_msi_domain_check_cap - Verify that @domain supports the capabilities
* for @dev
* @domain: The interrupt domain to check
* @info: The domain info for verification
* @dev: The device to check

View File

@ -223,7 +223,7 @@ EXPORT_SYMBOL_GPL(pci_p2pdma_add_resource);
/*
* Note this function returns the parent PCI device with a
* reference taken. It is the caller's responsibily to drop
* reference taken. It is the caller's responsibility to drop
* the reference.
*/
static struct pci_dev *find_parent_pci_dev(struct device *dev)
@ -380,7 +380,7 @@ static int upstream_bridge_distance(struct pci_dev *provider,
/*
* Allow the connection if both devices are on a whitelisted root
* complex, but add an arbitary large value to the distance.
* complex, but add an arbitrary large value to the distance.
*/
if (root_complex_whitelist(provider) &&
root_complex_whitelist(client))
@ -439,7 +439,7 @@ static int upstream_bridge_distance_warn(struct pci_dev *provider,
}
/**
* pci_p2pdma_distance_many - Determive the cumulative distance between
* pci_p2pdma_distance_many - Determine the cumulative distance between
* a p2pdma provider and the clients in use.
* @provider: p2pdma provider to check against the client list
* @clients: array of devices to check (NULL-terminated)

View File

@ -305,7 +305,7 @@ int pci_bridge_emul_init(struct pci_bridge_emul *bridge,
}
/*
* Cleanup a pci_bridge_emul structure that was previously initilized
* Cleanup a pci_bridge_emul structure that was previously initialized
* using pci_bridge_emul_init().
*/
void pci_bridge_emul_cleanup(struct pci_bridge_emul *bridge)

View File

@ -1,7 +1,7 @@
// SPDX-License-Identifier: GPL-2.0
/* pci-pf-stub - simple stub driver for PCI SR-IOV PF device
*
* This driver is meant to act as a "whitelist" for devices that provde
* This driver is meant to act as a "whitelist" for devices that provide
* SR-IOV functionality while at the same time not actually needing a
* driver of their own.
*/

View File

@ -4501,7 +4501,7 @@ static int pci_af_flr(struct pci_dev *dev, int probe)
/*
* Wait for Transaction Pending bit to clear. A word-aligned test
* is used, so we use the conrol offset rather than status and shift
* is used, so we use the control offset rather than status and shift
* the test bit to match.
*/
if (!pci_wait_for_pending(dev, pos + PCI_AF_CTRL,

View File

@ -2,7 +2,7 @@
/*
* PCIe AER software error injection support.
*
* Debuging PCIe AER code is quite difficult because it is hard to
* Debugging PCIe AER code is quite difficult because it is hard to
* trigger various real hardware errors. Software based error
* injection can fake almost all kinds of errors with the help of a
* user space helper tool aer-inject, which can be gotten from:

View File

@ -382,7 +382,7 @@ struct pci_dev {
unsigned int is_busmaster:1; /* Is busmaster */
unsigned int no_msi:1; /* May not use MSI */
unsigned int no_64bit_msi:1; /* May only use 32-bit MSIs */
unsigned int no_64bit_msi:1; /* May only use 32-bit MSIs */
unsigned int block_cfg_access:1; /* Config space access blocked */
unsigned int broken_parity_status:1; /* Generates false positive parity */
unsigned int irq_reroute_variant:2; /* Needs IRQ rerouting variant */

View File

@ -1112,7 +1112,7 @@
#define PCI_VENDOR_ID_AL 0x10b9
#define PCI_DEVICE_ID_AL_M1533 0x1533
#define PCI_DEVICE_ID_AL_M1535 0x1535
#define PCI_DEVICE_ID_AL_M1535 0x1535
#define PCI_DEVICE_ID_AL_M1541 0x1541
#define PCI_DEVICE_ID_AL_M1563 0x1563
#define PCI_DEVICE_ID_AL_M1621 0x1621
@ -1752,7 +1752,7 @@
#define PCI_VENDOR_ID_STALLION 0x124d
/* Allied Telesyn */
#define PCI_VENDOR_ID_AT 0x1259
#define PCI_VENDOR_ID_AT 0x1259
#define PCI_SUBDEVICE_ID_AT_2700FX 0x2701
#define PCI_SUBDEVICE_ID_AT_2701FX 0x2703
@ -2550,7 +2550,7 @@
#define PCI_DEVICE_ID_KORENIX_JETCARDF2 0x1700
#define PCI_DEVICE_ID_KORENIX_JETCARDF3 0x17ff
#define PCI_VENDOR_ID_HUAWEI 0x19e5
#define PCI_VENDOR_ID_HUAWEI 0x19e5
#define PCI_VENDOR_ID_NETRONOME 0x19ee
#define PCI_DEVICE_ID_NETRONOME_NFP4000 0x4000