Split off Orion GPIO handling code into plat-orion/, and add
support for multiple sets of (32) GPIO pins.
Signed-off-by: Lennert Buytenhek <buytenh@marvell.com>
Signed-off-by: Nicolas Pitre <nico@marvell.com>
When CONFIG_PM is selected, the VFP code does not have any handler
installed to deal with either saving the VFP state of the current
task, nor does it do anything to try and restore the VFP after a
resume.
On resume, the VFP will have been reset and the co-processor access
control registers are in an indeterminate state (very probably the
CP10 and CP11 the VFP uses will have been disabled by the ARM core
reset). When this happens, resume will break as soon as it tries to
unfreeze the tasks and restart scheduling.
Add a sys device to allow us to hook the suspend call to save the
current thread state if the thread is using VFP and a resume hook
which restores the CP10/CP11 access and ensures the VFP is disabled
so that the lazy swapping will take place on next access.
Signed-off-by: Ben Dooks <ben-linux@fluff.org>
Signed-off-by: Russell King <rmk+kernel@arm.linux.org.uk>
As per Russell King's last review comment, find and remove
all unnecessary includes of <linux/delay.h> in the files
that do not need them.
Signed-off-by: Ben Dooks <ben-linux@fluff.org>
The commit 39263db7986bf15c753f6847699107bdf5a2e318 added
a default <mach/io.h> implementation which is shared if
needed between all the s3c implementations. Remove the
s3c24a0 version which is the same as this.
Signed-off-by: Ben Dooks <ben-linux@fluff.org>
As noted by Russell King, do not print any warnings if the
uinfo or tty fields are not set when a CPU frequency change
is sent.
Signed-off-by: Ben Dooks <ben-linux@fluff.org>
The changes for ARM highmem support have removed the need
for the __virt_to_bus and __bus_to_virt macros, so remove them
from this build.
Signed-off-by: Ben Dooks <ben-linux@fluff.org>
Add the fourth UART definition for the S3C2443, and at the
same time fixup the problems caused by the enlarging of the
UART array in the previous commits.
Signed-off-by: Ben Dooks <ben-linux@fluff.org>
Fix the usage of CONFIG_SERIAL_SAMSUNG_UARTS in several places
in the kernel where it had been missed. This finishes fixing a
long standing issue where S3C2443 and S3C64XX could not use the
4th UART
Signed-off-by: Ben Dooks <ben-linux@fluff.org>
This patch removes the inclusion of mach/hardware.h from mach/irqs.h and
switches to more meaningful names for the irq related macros.
Signed-off-by: Sascha Hauer <s.hauer@pengutronix.de>
This patch adds a missing call to local_irq_restore() and fixes some
compiler warnings about unused variables for MX1.
Signed-off-by: Sascha Hauer <s.hauer@pengutronix.de>
Add GPIO support to the SM501 on the Simtec Anubis,
and then add the necessary updates for allowing the
two gpio I2C busses to be used.
Signed-off-by: Ben Dooks <ben-linux@fluff.org>
Fix the name of the driver, as well as the fact we are not
passing the number of chipselects to the driver.
Signed-off-by: Ben Dooks <ben-linux@fluff.org>
A common core driver for the S3C24XX ADC block so that
the touchscreen, hwmon and any other drivers can share
the resource.
Signed-off-by: Ben Dooks <ben-linux@fluff.org>
With TFTs we can do 5/6/5 instead of 4/4/4. Add a bitfield for this
and use it with TFTs.
Acked-by: Krzysztof Helt <krzysztof.h1@poczta.fm>
Signed-off-by: Sascha Hauer <s.hauer@pengutronix.de>
The upper/lower and left/right margins are mixed up in the driver.
Fix it
Acked-by: Krzysztof Helt <krzysztof.h1@poczta.fm>
Signed-off-by: Sascha Hauer <s.hauer@pengutronix.de>
This patch prepares the current i.MX1 framebuffer driver for usage in the
whole i.MX family. It switches to readl/writel for register accesses.
Also it moves the register definitions to the driver where they belong.
Acked-by: Krzysztof Helt <krzysztof.h1@poczta.fm>
Signed-off-by: Juergen Beisert <j.beisert@pengutronix.de>
Signed-off-by: Sascha Hauer <s.hauer@pengutronix.de>
Remove the gpio mux setup function from i.MX framebuffer driver.
This function is platform specific and thus should be done by
the board setup. As there are currently no in-kernel users
of this driver we do not break anything.
Acked-by: Krzysztof Helt <krzysztof.h1@poczta.fm>
Signed-off-by: Sascha Hauer <s.hauer@pengutronix.de>
Drivers which are going to use it will have to select it and use
mxc_set_irq_fiq() to set FIQ mode for this interrupt.
Signed-off-by: Paulius Zaleckas <paulius.zaleckas@teltonika.lt>
Signed-off-by: Sascha Hauer <s.hauer@pengutronix.de>
Adds support for MX1 architecture to UART driver.
Signed-off-by: Paulius Zaleckas <paulius.zaleckas@teltonika.lt>
Signed-off-by: Sascha Hauer <s.hauer@pengutronix.de>
Adds MX1 architecture to platform MXC. It will supersede mach-imx
and let it die.
Signed-off-by: Paulius Zaleckas <paulius.zaleckas@teltonika.lt>
Signed-off-by: Darius Augulis <augulis.darius@gmail.com>
Signed-off-by: Sascha Hauer <s.hauer@pengutronix.de>
Fix GIUS register setup in the mxc_gpio_mode().
Signed-off-by: Darius Augulis <augulis.darius@gmail.com>
Signed-off-by: Sascha Hauer <s.hauer@pengutronix.de>
Initial support for mx31moboard platfor with 3 serial ports
and NOR Flash
Signed-off-by: Valentin Longchamp <valentin.longchamp@epfl.ch>
Signed-off-by: Sascha Hauer <s.hauer@pengutronix.de>
pins definition for UART5 when used in alternate mode 2
Signed-off-by: Valentin Longchamp <valentin.longchamp@epfl.ch>
Signed-off-by: Sascha Hauer <s.hauer@pengutronix.de>
