A special sysfs entry to display the driver version is not
needed. We left the driver version and adjusted it to the
naming a lot of other drivers use. The information can be
retrieved by using modinfo genwqe_card.
modinfo genwqe_card will provide the same information.
Signed-off-by: Frank Haverkamp <haver@linux.vnet.ibm.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Currently the driver is using the pci_get_totalvfs() return code
directly in a loop. To avoid problems with potentially negative
returns in case of errors, we are adding some more sanity checking
code.
Signed-off-by: Frank Haverkamp <haver@linux.vnet.ibm.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Calling strncpy with a maximum size argument of 32 bytes on destination
array kim_gdata->dev_name of size 32 bytes might leave the destination
string unterminated.
Signed-off-by: Lee Jones <lee.jones@linaro.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Coverity reported:
This less-than-zero comparison of an unsigned value is never true.
In answer to that, we only ever decrement if protos_registered is
positive. We can subsequently remove the paranoid checking during
unregister.
Signed-off-by: Lee Jones <lee.jones@linaro.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
We definitely know that only x86 (32-bit) architecture is affected by the issue, so implement a stub instead of the actual check for other architectures.
We also know that motherboard LPT chipset is affected, so the port is either come from
parport_pc_init (when `io' module param is used) or
parport_pc_find_isa_ports (when default LPT ports are probbed: 0x378, 0x278, 0x3bc).
In both cases the port considered as 'legacy' and `dev' member of struct parport is NULL. See also comments for `struct parport' in parport.h
Signed-off-by: Matwey V. Kornilov <matwey@sai.msu.ru>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Put the code to check present of the Intel bug from parport_EPP_supported
into new intel_bug_present function. The later also return ECR register
to the state it has before function call.
Signed-off-by: Matwey V. Kornilov <matwey@sai.msu.ru>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
There was not any kind of protection against carrier driver removal.
In this way, device driver can 'get' the carrier driver when it is
using it.
Signed-off-by: Federico Vaga <federico.vaga@cern.ch>
Acked-by: Samuel Iglesias Gonsalvez <siglesias@igalia.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
There is no need to init .owner field.
Based on the patch from Peter Griffin <peter.griffin@linaro.org>
"mmc: remove .owner field for drivers using module_platform_driver"
This patch removes the superflous .owner field for drivers which
use the module_platform_driver API, as this is overriden in
platform_driver_register anyway."
Signed-off-by: Michal Simek <michal.simek@xilinx.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
The various devm_ functions allocate memory that is released when a
driver detaches. This patch uses these functions for data that is
allocated in the probe function of a platform device and is only freed
in the remove function. Also, the unnecessary labels are removed and
linux/device.h is added to make sure the devm_*() routine declarations
are unambiguously available.
The initial call to platform_get_resource is moved down to the
introduced call to devm_ioremap_resource that uses its result.
Signed-off-by: Himangi Saraogi <himangi774@gmail.com>
Acked-by: Julia Lawall <julia.lawall@lip6.fr>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
This patch introduces the use of devm_kzalloc and does away with the
kfrees in the probe and remove functions. Also, a label and the err
variable are removed. The header device.h is included to make the devm_
function explicitly available and slab.h is done away with as it is no
longer needed.
Signed-off-by: Himangi Saraogi <himangi774@gmail.com>
Acked-by: Julia Lawall <julia.lawall@lip6.fr>
Reviewed-by: Jean Delvare <jdelvare@suse.de>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
function 'strncpy' will fill whole buffer 'id.name' of fixed size (32)
with string value and will not leave place for NULL-terminator.
Possible buffer boundaries violation in following string operations.
Replace strncpy with strlcpy.
Cc: stable@vger.kernel.org # 3.10+
Signed-off-by: Alexander Usyskin <alexander.usyskin@intel.com>
Signed-off-by: Tomas Winkler <tomas.winkler@intel.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
There is no need for dynamic allocation for connect_data.
We can use variable on the stack and make code less
error prone and simple
Signed-off-by: Tomas Winkler <tomas.winkler@intel.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Handle ioctls in a switch statement so we can
add more commands easily
Signed-off-by: Tomas Winkler <tomas.winkler@intel.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
extract supported hbm features and commands from the hbm version
Signed-off-by: Tomas Winkler <tomas.winkler@intel.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
We cannot handle user interrupt in context of hbm start
so we only wait for time out which is reasonably short.
1. Add kdoc
2. Rename state to better reflect its function
3. Simplify wait condition and rename
wait_recvd_msg to wait_hbm_start
Signed-off-by: Alexander Usyskin <alexander.usyskin@intel.com>
Signed-off-by: Tomas Winkler <tomas.winkler@intel.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Both responses have same flow only the client status
update is different. We introduce handler mei_hbm_cl_res()
that handles both responses
Also we use per client wait queue (cl->wait) rather then
global dev->wait_recvd_msg
Signed-off-by: Tomas Winkler <tomas.winkler@intel.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Rename mei_cl_irq_close to mei_cl_irq_disconnect
and MEI_FOP_CLOSE to MEI_FOP_DISCONNECT
Remove unused MEI_FOP_OPEN
Signed-off-by: Tomas Winkler <tomas.winkler@intel.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
HBM uses global list of status values
from which the values of particular commands
are derived
Signed-off-by: Tomas Winkler <tomas.winkler@intel.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
When handling dynamic clients there might be a race
scenario in which two me clients with the same me
address would be linked in the me clients list,
therefore we need to search by both uuid and me address.
Signed-off-by: Tomas Winkler <tomas.winkler@intel.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
To support dynamic addition/remove we add wrappers
for removal of me clients
Signed-off-by: Tomas Winkler <tomas.winkler@intel.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
To support dynamic addition/remove of clients
it is more convenient to use list instead of
static array
Signed-off-by: Tomas Winkler <tomas.winkler@intel.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
For support of dynamic addition and removal of me clients
it is more convenient to use a list instead of static array
as is use now.
As the first step of the transition to the new data structure
we change the lookup function so it returns me client address
instead of an index.
Signed-off-by: Tomas Winkler <tomas.winkler@intel.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Reduce few code lines by using wrappers for sending
simple hbm client messages
Signed-off-by: Tomas Winkler <tomas.winkler@intel.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Use consistently me_addr name in hbm protocol structures
to represent in firmware client address
Signed-off-by: Tomas Winkler <tomas.winkler@intel.com>
Signed-off-by: Alexander Usyskin <alexander.usyskin@intel.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Amthif has its own queues therefore it is redundant
to check the client type when processing the queues
Signed-off-by: Alexander Usyskin <alexander.usyskin@intel.com>
Signed-off-by: Tomas Winkler <tomas.winkler@intel.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Replace open coded loop with an existing service function:
mei_io_list_flush
Signed-off-by: Alexander Usyskin <alexander.usyskin@intel.com>
Signed-off-by: Tomas Winkler <tomas.winkler@intel.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
We cannot handle user interrupt in context of hw initialization
so we only wait for time out which is reasonably short
Also we don't need to check error from wait, only flag value.
Signed-off-by: Alexander Usyskin <alexander.usyskin@intel.com>
Signed-off-by: Tomas Winkler <tomas.winkler@intel.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
This patchset add new extcon provider driver and fix minor issue of extcon driver.
Detailed description for patchset:
1. Add new Richtek RT8973A extcon driver
This driver support for Richtek RT8973A which is Micro USB Switch OVP and
i2c interface. The RT8973A is a USB port accessory detector and switch that is
optimized to protect low voltage system from abnormal high input voltage
(up to 28V) and supports high speed USB operation. Also, RT8973A support
'auto-configuration' mode. If auto-configuration mode is enabled, RT8973A
would control internal h/w patch for USB D-/D+ switching.
2. Fix code cleanup for other extcon driver
- extcon-sm5502 driver
: Fix bug to check cable type and build break.
: Move header file from include/linux/extcon to drivers/extcon because this
header file is only user for extcon-sm5502.c.
: Clean up codes by using checkpatch script
- extcon-max77693 driver
: Use resource managed interrupt function
: Fix bug to set ADC debounce time
- extcon-gpio driver
: Fix minor code cleanup
-----BEGIN PGP SIGNATURE-----
Version: GnuPG v1.4.11 (GNU/Linux)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=dA4d
-----END PGP SIGNATURE-----
Merge tag 'extcon-next-for-3.18' of git://git.kernel.org/pub/scm/linux/kernel/git/chanwoo/extcon into char-misc-next
Chanwoo writes:
Update extcon for v3.18
This patchset add new extcon provider driver and fix minor issue of extcon driver.
Detailed description for patchset:
1. Add new Richtek RT8973A extcon driver
This driver support for Richtek RT8973A which is Micro USB Switch OVP and
i2c interface. The RT8973A is a USB port accessory detector and switch that is
optimized to protect low voltage system from abnormal high input voltage
(up to 28V) and supports high speed USB operation. Also, RT8973A support
'auto-configuration' mode. If auto-configuration mode is enabled, RT8973A
would control internal h/w patch for USB D-/D+ switching.
2. Fix code cleanup for other extcon driver
- extcon-sm5502 driver
: Fix bug to check cable type and build break.
: Move header file from include/linux/extcon to drivers/extcon because this
header file is only user for extcon-sm5502.c.
: Clean up codes by using checkpatch script
- extcon-max77693 driver
: Use resource managed interrupt function
: Fix bug to set ADC debounce time
- extcon-gpio driver
: Fix minor code cleanup
This patch fixes following minor cleanup:
- Order the include files in alphabetical order.
- Fix description of state_off in extcon_gpio.h
- Add a descrition for check_on_resume in extcon_gpio.h
Signed-off-by: George Cherian <george.cherian@ti.com>
[Modify the name/description of patch to keep standary codiyg style by Chanwoo Choi]
Signed-off-by: Chanwoo Choi <cw00.choi@samsung.com>
When it writes some value other than 0 to BTLDset and JIGset, muic device
will be reset automatically. And it happens during updating ADC debounce time,
because it shares same register. To update ADC debounce time without reset,
set value only to ADCDbset and 0 to BTLDset and JIGset.
Signed-off-by: Jonghwa Lee <jonghwa3.lee@samsung.com>
[Remove un-needed masking operation by Chanwoo Choi]
Signed-off-by: Chanwoo Choi <cw00.choi@samsung.com>
Don't include <linux/input.h> when the driver does not use anything
from this header file.
Signed-off-by: Jean Delvare <jdelvare@suse.de>
Acked-by: MyungJoo Ham <myungjoo.ham@samsung.com>
Signed-off-by: Chanwoo Choi <cw00.choi@samsung.com>
Cc: Chanwoo Choi <cw00.choi@samsung.com>
Cc: MyungJoo Ham <myungjoo.ham@samsung.com>
Use resource managed interrupt line devm_request_threaded_irq() to
simplify a little cleanup paths:
- no goto to cleanup label,
- simpler remove function.
Overall the driver size is decreased by 11 line of code.
Signed-off-by: Krzysztof Kozlowski <k.kozlowski@samsung.com>
Signed-off-by: Chanwoo Choi <cw00.choi@samsung.com>
This patch add documentation for binding of Richtek RT8973A (Micro USB Switch)
device which is using EXTCON subsystem. The RT8973A device can detect various
external accessories when external accessories is attached or detached.
Signed-off-by: Chanwoo Choi <cw00.choi@samsung.com>
Acked-by: Kyungmin Park <kyungmin.park@samsung.com>
This patch add support for Richtek RT8973A which is Micro USB Switch OVP
and i2c interface. The RT8973A is a USB port accessory detector and switch
that is optimized to protect low voltage system from abnormal high input
voltage (up to 28V) and supports high speed USB operation. Also, RT8973A
support 'auto-configuration' mode. If auto-configuration mode is enabled,
RT8973A would control internal h/w patch for USB D-/D+ switching.
Signed-off-by: Chanwoo Choi <cw00.choi@samsung.com>
Signed-off-by: Seung-Woo Kim <sw0312.kim@samsung.com>
Acked-by: Kyungmin Park <kyungmin.park@samsung.com>
This patch just clean up codes by using checkpatch script and fix warning
message about if statement.
- the result of checkpatch script as following:
WARNING: void function return statements are not generally useful
+ return;
+}
WARNING: quoted string split across lines
+ dev_err(info->dev, "failed: irq request (IRQ: %d,"
+ " error :%d)\n", muic_irq->irq, ret);
- warning message about coding style.
drivers/extcon/extcon-sm5502.c:398 sm5502_muic_cable_handler()
warn: we tested 'attached' before and it was 'false'
Signed-off-by: Chanwoo Choi <cw00.choi@samsung.com>
This patch move sm5502.h header file from 'include/linux/extcon' to
'driver/extcon' because sm5502.h is used for driver/extcon/extcon-sm5502.c.
and remove duplicate license description.
Signed-off-by: Chanwoo Choi <cw00.choi@samsung.com>
This patch add I2C configuration dependency to fix following build break.
If specific kernel build I2C as module, extcon-sm5502 have to depend on
I2C configuration.
drivers/built-in.o: In function `regmap_smbus_byte_reg_read':
regmap-i2c.c:(.text+0x5030a): undefined reference to `i2c_smbus_read_byte_data'
drivers/built-in.o: In function `regmap_smbus_byte_reg_write':
regmap-i2c.c:(.text+0x50338): undefined reference to `i2c_smbus_write_byte_data'
drivers/built-in.o: In function `regmap_smbus_word_reg_read':
regmap-i2c.c:(.text+0x50356): undefined reference to `i2c_smbus_read_word_data'
drivers/built-in.o: In function `regmap_smbus_word_reg_write':
regmap-i2c.c:(.text+0x50384): undefined reference to `i2c_smbus_write_word_data'
drivers/built-in.o: In function `regmap_i2c_read':
regmap-i2c.c:(.text+0x503cf): undefined reference to `i2c_transfer'
drivers/built-in.o: In function `regmap_i2c_gather_write':
regmap-i2c.c:(.text+0x50442): undefined reference to `i2c_transfer'
drivers/built-in.o: In function `regmap_i2c_write':
regmap-i2c.c:(.text+0x50474): undefined reference to `i2c_master_send'
drivers/built-in.o: In function `sm5502_muic_i2c_init':
extcon-sm5502.c:(.init.text+0x6630): undefined reference to `i2c_register_driver'
Signed-off-by: Chanwoo Choi <cw00.choi@samsung.com>
This patch fix bug when checking cable type. SM5502 have to use ADC value
to get correct cable type.
Signed-off-by: Chanwoo Choi <cw00.choi@samsung.com>
Pull vfs fixes from Al Viro:
"double iput() on failure exit in lustre, racy removal of spliced
dentries from ->s_anon in __d_materialise_dentry() plus a bunch of
assorted RCU pathwalk fixes"
The RCU pathwalk fixes end up fixing a couple of cases where we
incorrectly dropped out of RCU walking, due to incorrect initialization
and testing of the sequence locks in some corner cases. Since dropping
out of RCU walk mode forces the slow locked accesses, those corner cases
slowed down quite dramatically.
* 'for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/viro/vfs:
be careful with nd->inode in path_init() and follow_dotdot_rcu()
don't bugger nd->seq on set_root_rcu() from follow_dotdot_rcu()
fix bogus read_seqretry() checks introduced in b37199e
move the call of __d_drop(anon) into __d_materialise_unique(dentry, anon)
[fix] lustre: d_make_root() does iput() on dentry allocation failure
The performance regression that Josef Bacik reported in the pathname
lookup (see commit 99d263d4c5 "vfs: fix bad hashing of dentries") made
me look at performance stability of the dcache code, just to verify that
the problem was actually fixed. That turned up a few other problems in
this area.
There are a few cases where we exit RCU lookup mode and go to the slow
serializing case when we shouldn't, Al has fixed those and they'll come
in with the next VFS pull.
But my performance verification also shows that link_path_walk() turns
out to have a very unfortunate 32-bit store of the length and hash of
the name we look up, followed by a 64-bit read of the combined hash_len
field. That screws up the processor store to load forwarding, causing
an unnecessary hickup in this critical routine.
It's caused by the ugly calling convention for the "hash_name()"
function, and easily fixed by just making hash_name() fill in the whole
'struct qstr' rather than passing it a pointer to just the hash value.
With that, the profile for this function looks much smoother.
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
Pull parisc updates from Helge Deller:
"The most important patch is a new Light Weigth Syscall (LWS) for 8,
16, 32 and 64 bit atomic CAS operations which is required in order to
be able to implement the atomic gcc builtins on our platform.
Other than that, we wire up the seccomp, getrandom and memfd_create
syscalls, fixes a minor off-by-one bug and a wrong printk string"
* 'parisc-3.17-1' of git://git.kernel.org/pub/scm/linux/kernel/git/deller/parisc-linux:
parisc: Implement new LWS CAS supporting 64 bit operations.
parisc: Wire up seccomp, getrandom and memfd_create syscalls
parisc: dino: fix %d confusingly prefixed with 0x in format string
parisc: sys_hpux: NUL terminator is one past the end
in the former we simply check if dentry is still valid after picking
its ->d_inode; in the latter we fetch ->d_inode in the same places
where we fetch dentry and its ->d_seq, under the same checks.
Cc: stable@vger.kernel.org # 2.6.38+
Signed-off-by: Al Viro <viro@zeniv.linux.org.uk>
