Initialise wl_info::tasklet early so that it's safe to tasklet_kill()
it in wl_free().
Remove assertions from wl_free() that may not be true in case of
initialisation failure.
Call wl_release_fw() in case of failure after wl_request_fw().
Don't rely on wl_firmware::fw_cnt in wl_release_fw().
Signed-off-by: Ben Hutchings <ben@decadent.org.uk>
Signed-off-by: Henry Ptasinski <henryp@broadcom.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
It would be nice if people tested their patches before sending
them to me...
Cc: Henry Ptasinski <henryp@broadcom.com>
Cc: Brett Rudley <brudley@broadcom.com>
Cc: Nohee Ko <noheek@broadcom.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
This is a patch to the adl_pci9111.c file that fixes up multiple please,
no space for starting a line warnings, found by the checkpatch.pl tool
Signed-off-by: Maurice Dawson <mauricedawson2699@gmail.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
Moving the AR6002 hw 2.0 specific register definitions files from
the hw.0 directory to a new directory, 'hw' within hw2.0.
Signed-off-by: Vipin Mehta <vmehta@atheros.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
The Sprint 4G network uses a Wimax dongle with Beecem
chipset. The driver is typical of out of tree drivers, but
maybe useful for people, and the hardware is readily available.
Here is a staging ready version (i.e warts and all)
0. Started with Rel_5.2.7.3P1_USB from Sprint4GDeveloperPack-1.1
1. Consolidated files in staging
2. Remove Dos cr/lf
3. Remove unnecessary ioctl from usbbcm_fops
Applied patches that were in the developer pack, surprising
there were ones for 2.6.35 already.
This is compile tested only, see TODO for what still needs
to be done.
Signed-off-by: Stephen Hemminger <shemminger@vyatta.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
This resolves a few of the coding style issues in the .h files
for this driver. It doesn't get all of them by far, but it's a
good start.
Cc: Al Cho <acho@novell.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
This driver is for the ENE card reader that can be found in many
different laptops. It was written by ENE, but cleaned up to
work properly in the kernel tree by Novell.
Signed-off-by: Al Cho <acho@novell.com>
Cc: <yiyingc@ene.com.tw>
Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
This patch fixes a compile warning removing an unnecessary log message.
I redo the patch against today linux-next.
Thanks a lot
Signed-off-by: Javier Martinez Canillas <martinez.javier@gmail.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
This patch fixes a compilation warning in today linux-next
removing some compilation conditionals.
Signed-off-by: Javier Martinez Canillas <martinez.javier@gmail.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
There are already implemented methods such hex_to_bin() or isxdigit() in
the kernel. Let's use them.
Signed-off-by: Andy Shevchenko <andy.shevchenko@gmail.com>
Acked-by: Vipin Mehta <Vipin.Mehta@Atheros.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
Jiri pointed out that the previous compiler warning fix was incorrect as
the compiler was properly saying that the variable was not being set.
This was due to a #define commenting out all of the logic in the
function.
This patch reverts Javier's previous one, and properly fixes the issue
by making the function actually doing something.
Reported-by: Jiri Slaby <jirislaby@gmail.com>
Cc: Javier Martinez Canillas <martinez.javier@gmail.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
This is a patch to the wwrap.c file that removes the initialization
of global variable 'smp_kevent_Lock' to 0
Signed-off-by: Prashant P. Shah <pshah.mumbai@gmail.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
Current patch solves compilation warnings in staging/xgifb for using
possibly uninitialized variables.
Signed-off-by: Javier Martinez Canillas <martinez.javier@gmail.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
This is a patch to the XGI_main_26 file that fixes many style
issues found by the checkpatch.pl tool.
- extra spaces
- invalid code indent
- extra braces
- invalid comment style
Signed-off-by: Prashant P. Shah <pshah.mumbai@gmail.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
Fix fb_defio bug in udlfb for multiple framebuffers
Previously when using fb_defio with multiple DisplayLink attached displays
udlfb incorrectly used a shared datastructure where it needed to have
one per fb_info struct. This was completely broken and caused all kinds of
problems, including rendering to one framebuffer affecting others.
Signed-off-by: Bernie Thompson <bernie@plugable.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
The Kconfig description for CONFIG_SBE_PMCC4_NCOMM says:
If you have purchased this optional support you must say Y or M
here to allow the driver to operate with the NCOMM product.
This is not correct as it can not be built as module,
this patch updates the description accordingly.
Signed-off-by: Michael Prokop <mika@grml.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
In each case, the function has an unsigned return type, but returns a
negative constant to indicate an error condition. For move_block_from_dma,
there is only one call and the return value is dropped, so it need not be
unsigned. For labpc_eeprom_write, there is only one call and the result is
stored in a signed variable, so again the unsigned return type is not
necessary.
A sematic match that finds this problem is as follows:
(http://coccinelle.lip6.fr/)
// <smpl>
@exists@
identifier f;
constant C;
@@
unsigned f(...)
{ <+...
* return -C;
...+> }
// </smpl>
Signed-off-by: Julia Lawall <julia@diku.dk>
Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
kmalloc() may fail, check for it.
Allocated memory is not freed.
Use IS_ERR() instead of strict checking.
Signed-off-by: Vasiliy Kulikov <segooon@gmail.com>
Cc: David Cross <david.cross@cypress.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
Functions alloc_ieee80211 and register_netdev may fail. Check for it.
Signed-off-by: Vasiliy Kulikov <segooon@gmail.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
Add module options for console and fb_defio
Convert fb_defio on/off switch to module option and add console option.
>From the command line, pass options to modprobe
modprobe udlfb defio=1 console=1
Or for permanent option, create file like /etc/modprobe.d/options with text
options udlfb defio=1 console=1
Accepted options:
fb_defio Make use of the fb_defio (CONFIG_FB_DEFERRED_IO) kernel
module to track changed areas of the framebuffer by page faults.
Standard fbdev applications that use mmap but that do not
report damage, may be able to work with this enabled.
Disabled by default because of overhead and other issues.
console Allow fbcon to attach to udlfb provided framebuffers. This
is disabled by default because fbcon will aggressively consume
the first framebuffer it finds, which isn't usually what the
user wants in the case of USB displays.
Signed-off-by: Bernie Thompson <bernie@plugable.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
Support writing default/backup edid via /sys/class/graphics/fb?/edid
Writing a backup edid blob to the 'edid' file will cause udlfb to
attempt to re-read the edid from hardware.
If we still don't have a good edid, it will use the backup edid instead.
The intent is to 1) enable user-supplied edid
2) enable udev rules to backup the last known good edid
for a device, and then provide that edid as a backup for all future starts
Signed-off-by: Bernie Thompson <bernie@plugable.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
Fix big endian rendering bug (affects PowerPC)
Thanks to Christian Melki at Ericsson for finding and suggesting patch.
Signed-off-by: Bernie Thompson <bernie@plugable.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
Enhance EDID and mode table handling
* Adds support for lower-end DL chips on higher-end monitors
* Adds support for using fbdev standard EDID parsing and handling
* Adds support for more dynamic reallocation of framebuffer, based on new EDID
Queries EDID from hardware with several retries then
queries DisplayLink chip for max pixel area via vendor descriptor.
Uses existing fbdev mode handling service funcations to build mode list
of common modes between adapter and monitor.
This enables lower-end chips (e.g. DL-125) to successfully pick a compatible
mode on higher end monitors (e.g. whose default mode is over 1280x1024).
Reallocate framebuffer if necessary in response to new max mode.
Signed-off-by: Bernie Thompson <bernie@plugable.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
Revamp reference handling and synchronization for unload/shutdown
Udlfb is a "virtual" framebuffer device that really exists on
two separate stacks: at the bottom of the framebuffer interface,
and on top of USB. During unload, there's no guarantee which
one will tear down first. So reference counting must be solid
to handle all possibilities and not access anything once its gone.
Signed-off-by: Bernie Thompson <bernie@plugable.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
Remove metrics_misc sysfs attribute
Previously returned multiple values, which goes against sysfs guidelines.
Had been used for debugging to figure out which of the multiple
fbdev interfaces an app was using, but log file messages are sufficient.
Signed-off-by: Bernie Thompson <bernie@plugable.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
Add ability to power off monitor with standard blanking interface
Used by X servers and others to manage power of dislpay
Signed-off-by: Bernie Thompson <bernie@plugable.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
Restore fbdev character read and write support
Enables access to the framebuffer from simple reads and writes
to /dev/fb0 (or fb1, ...). Low performance, because of extra copy
and because udlfb must scan every pixel for changes. But very
useful for testing and simple image display, etc.
Signed-off-by: Bernie Thompson <bernie@plugable.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
