Commit Graph

78935 Commits

Author SHA1 Message Date
David Woodhouse
2eb188a1c5 libertas: Move actual transmission to main thread
The locking issues with TX, especially TX from multiple netdevs, get
_so_ much easier if you do it like this.

Signed-off-by: David Woodhouse <dwmw2@infradead.org>
Signed-off-by: John W. Linville <linville@tuxdriver.com>
2008-01-28 15:06:30 -08:00
David Woodhouse
b8d40bc9c9 libertas: refactor the 'should I sleep?' decision in lbs_thread()
This was making my brain hurt.

Signed-off-by: David Woodhouse <dwmw2@infradead.org>
Signed-off-by: John W. Linville <linville@tuxdriver.com>
2008-01-28 15:06:30 -08:00
David Woodhouse
45c24903b7 libertas: free successfully transmitted skbs again
I was so busy cleaning up the failure modes that I accidentally forgot
to make sure we still free them in the success case. Oops.

Signed-off-by: David Woodhouse <dwmw2@infradead.org>
Signed-off-by: John W. Linville <linville@tuxdriver.com>
2008-01-28 15:06:29 -08:00
David Woodhouse
a97bcfed96 libertas: TX packet is radiotap iff it comes from rtap_dev
Fix one of the barriers to simultaneous radiotap and normal operation --
stop misinterpreting the TX packets on the normal devices. We're also
going to have to clone the incoming skbs and feed them into both
devices, and there seem to be firmware problems with staying associated
too. But this is a reasonable start...

Signed-off-by: David Woodhouse <dwmw2@infradead.org>
Signed-off-by: John W. Linville <linville@tuxdriver.com>
2008-01-28 15:06:28 -08:00
David Woodhouse
121947c62a libertas: set dev_addr on rtap device
This lets us bring it up, because eth_validate_addr() succeeds instead
of returning -EINVAL. And finally monitor mode seems to (mostly) work.

Signed-off-by: David Woodhouse <dwmw2@infradead.org>
Signed-off-by: John W. Linville <linville@tuxdriver.com>
2008-01-28 15:06:27 -08:00
David Woodhouse
d9268fb9a1 libertas: stop using ieee80211 for radiotap device
There seems to be no point in doing it as an ieee80211 device instead of
a normal netdev, and when we override its ->priv and then call
free_ieee80211() it has a distressing tendency to crash horribly.

Signed-off-by: David Woodhouse <dwmw2@infradead.org>
Signed-off-by: John W. Linville <linville@tuxdriver.com>
2008-01-28 15:06:27 -08:00
David Woodhouse
198cefb932 libertas: kill lbs_pre_start_xmit(), lib_mesh_pre_start_xmit()
These wrappers only do two things.

Firstly, they set the frame type, which isn't necessary since
lbs_hard_start_xmit() gets to see which device it belongs to anyway.

Secondly, they return -EOPNOTSUPP if the device is in monitor mode.
Which is a strange thing to do and will provide nasty warnings from
qdisc_restart(). And lbs_hard_start_xmit() seems to have code to cope
with monitor mode anyway.

Signed-off-by: David Woodhouse <dwmw2@infradead.org>
Signed-off-by: John W. Linville <linville@tuxdriver.com>
2008-01-28 15:06:26 -08:00
David Woodhouse
a2b62dc1f1 libertas: clean up lbs_hard_start_xmit()
Having merged the nest of functions into one, now we can clean it up and
fix the error handling, and the duplication -- and at least make a start
on the locking.

Signed-off-by: David Woodhouse <dwmw2@infradead.org>
Signed-off-by: John W. Linville <linville@tuxdriver.com>
2008-01-28 15:06:25 -08:00
David Woodhouse
8af23b2f96 libertas: kill lbs_process_tx() by merging it into lbs_hard_start_xmit()
Signed-off-by: David Woodhouse <dwmw2@infradead.org>
Signed-off-by: John W. Linville <linville@tuxdriver.com>
2008-01-28 15:06:25 -08:00
David Woodhouse
a9bdce6564 libertas: move lbs_hard_start_xmit() into tx.c
... where it can shortly be merged with lbs_process_tx()...

Signed-off-by: David Woodhouse <dwmw2@infradead.org>
Signed-off-by: John W. Linville <linville@tuxdriver.com>
2008-01-28 15:06:24 -08:00
David Woodhouse
6b4a7e0fbd libertas: kill SendSinglePacket() function.
Make a start on reducing the number of pointless nested functions,
starting with the StudlyCaps. No semantic changes (yet) -- we can sort
out the now-obvious discrepancy in the failure paths in a separate
commit.

Signed-off-by: David Woodhouse <dwmw2@infradead.org>
Signed-off-by: John W. Linville <linville@tuxdriver.com>
2008-01-28 15:06:23 -08:00
David Woodhouse
2abdc0b775 libertas: kill internal tx queue for PS mode
It was buggy as hell anyway, since it was just spewing packets at the
device when it wasn't necessarily ready for them (in the USB case, while
the URB was still busy).

We could probably do with a better way of flushing packets to the device
_immediately_, before we stick it back into sleep mode. But we can no
longer just dequeue packets directly, it seems.

Signed-off-by: David Woodhouse <dwmw2@infradead.org>
Signed-off-by: John W. Linville <linville@tuxdriver.com>
2008-01-28 15:06:22 -08:00
David Woodhouse
020bb19e2f libertas: stop debugfs code looking at cmdpendingq
It doesn't need to wait until no commands are pending anyway -- it only
needs to wait until the scan is finished.

We can hopefully find it something else to wait on too -- it's the only
user of the cmd_pending waitqueue.

Signed-off-by: David Woodhouse <dwmw2@infradead.org>
Signed-off-by: John W. Linville <linville@tuxdriver.com>
2008-01-28 15:06:22 -08:00
David Woodhouse
6d35fdfced libertas: cope with device which already has firmware loaded
Signed-off-by: David Woodhouse <dwmw2@infradead.org>
Signed-off-by: John W. Linville <linville@tuxdriver.com>
2008-01-28 15:06:21 -08:00
David Woodhouse
a63b22bb5b libertas: use lbs_host_to_card_done() in lbs_tx_timeout()
Also attempt some locking in lbs_host_to_card_done()

Signed-off-by: David Woodhouse <dwmw2@infradead.org>
Signed-off-by: John W. Linville <linville@tuxdriver.com>
2008-01-28 15:06:20 -08:00
David Woodhouse
aa21c004f8 libertas: kill struct lbs_adapter
There seems to be no reason for a separate structure; move it all
into struct lbs_private.

Signed-off-by: David Woodhouse <dwmw2@infradead.org>
Signed-off-by: John W. Linville <linville@tuxdriver.com>
2008-01-28 15:06:19 -08:00
David Woodhouse
f86a93e1b2 libertas: kill TxLockFlag
We don't need this. We can use adapter->currenttxskb instead.

Signed-off-by: David Woodhouse <dwmw2@infradead.org>
Signed-off-by: John W. Linville <linville@tuxdriver.com>
2008-01-28 15:06:18 -08:00
David Woodhouse
e7deced05f libertas: fix lbs_rtap attribute in sysfs
At least it doesn't oops when you attempt to read or write it now.
Only when you enable it and then later turn it off. And when it's
enabled I don't see how it actually works.

But one fewer oops is good, for now...

Signed-off-by: David Woodhouse <dwmw2@infradead.org>
Signed-off-by: John W. Linville <linville@tuxdriver.com>
2008-01-28 15:06:18 -08:00
David Woodhouse
59f3e4bf1e libertas: clean up lbs_thread() to make it slightly more readable
No semantic changes.

Signed-off-by: David Woodhouse <dwmw2@infradead.org>
Signed-off-by: John W. Linville <linville@tuxdriver.com>
2008-01-28 15:06:17 -08:00
David Woodhouse
448a51ae06 libertas: switch lbs_cmd() to take a callback function pointer
All existing code which sends commands is set up to have some function
called with the results, not to get data back. It's more versatile this
way, and providing it with a callback function which involves memcpy()
is hardly difficult.

Signed-off-by: David Woodhouse <dwmw2@infradead.org>
Signed-off-by: John W. Linville <linville@tuxdriver.com>
2008-01-28 15:06:16 -08:00
David Woodhouse
ac47246e24 libertas: kill adapter->nr_cmd_pending
Signed-off-by: David Woodhouse <dwmw2@infradead.org>
Signed-off-by: John W. Linville <linville@tuxdriver.com>
2008-01-28 15:06:15 -08:00
David Woodhouse
99c893f34a libertas: Fix up error handling in lbs_setuserscan()
Signed-off-by: David Woodhouse <dwmw2@infradead.org>
Signed-off-by: John W. Linville <linville@tuxdriver.com>
2008-01-28 15:06:14 -08:00
David Woodhouse
c12bdc45d9 libertas: Don't set IW_ENCODE_NOKEY when returning WEP keys.
Also clean up the double setting/clearing of IW_ENCODE_DISABLED.

Signed-off-by: David Woodhouse <dwmw2@infradead.org>
Signed-off-by: John W. Linville <linville@tuxdriver.com>
2008-01-28 15:06:14 -08:00
Holger Schurig
c2df2efe96 libertas: endianness fixes
Recently I found that that sparse by default doesn't endianness
checks. So I changed my compilation habit to be

make modules C=1 SUBDIRS=drivers/net/wireless/libertas
CHECKFLAGS="-D__CHECK_ENDIAN__"

so that I get the little-endian checks from sparse as well. That
showed up a good bunch of problems.

Signed-off-by: Holger Schurig <hs4233@mail.mn-solutions.de>
Signed-off-by: David Woodhouse <dwmw2@infradead.org>
Signed-off-by: John W. Linville <linville@tuxdriver.com>
2008-01-28 15:06:13 -08:00
David Woodhouse
1723047d67 libertas: Switch to using a callback function pointer for commands
Signed-off-by: David Woodhouse <dwmw2@infradead.org>
Signed-off-by: John W. Linville <linville@tuxdriver.com>
2008-01-28 15:06:12 -08:00
David Woodhouse
0856e6816b libertas: when usb_submit_usb fails, include the error code in the printk
Signed-off-by: David Woodhouse <dwmw2@infradead.org>
Signed-off-by: John W. Linville <linville@tuxdriver.com>
2008-01-28 15:06:11 -08:00
Holger Schurig
ffd074fc78 libertas: implement new scanning logic
This changes the code that is used for scanning and makes it hopefully
easier to understand:

* move function into logical blocks
* create a bunch of lbs_scan_add_XXXX_tlv() functions, that
  help to create the TLV parameter of CMD_802_11_SCAN
* all of them are now called from the much simpler lbs_do_scan()
* no **puserscancfg double-pointers :-)

Signed-off-by: Holger Schurig <hs4233@mail.mn-solutions.de>
Acked-by: Dan Williams <dcbw@redhat.com>
Signed-off-by: David Woodhouse <dwmw2@infradead.org>
Signed-off-by: John W. Linville <linville@tuxdriver.com>
2008-01-28 15:06:11 -08:00
David Woodhouse
83eacf233e libertas: Fix endianness in boot2_version handling.
We read it from the card. We byte-swap it. We write it back to the card.
D'oh.

Signed-off-by: David Woodhouse <dwmw2@infradead.org>
Signed-off-by: John W. Linville <linville@tuxdriver.com>
2008-01-28 15:06:10 -08:00
David Woodhouse
f9f6890e41 libertas: Remove SET_BOOT2_VER support from the Big Switch Statement.
And the death of libertas_prepare_and_send_command() starts...

Signed-off-by: David Woodhouse <dwmw2@infradead.org>
Signed-off-by: John W. Linville <linville@tuxdriver.com>
2008-01-28 15:06:09 -08:00
David Woodhouse
04c80f1ab1 libertas: Use lbs_cmd() for setting Boot2 version
Signed-off-by: David Woodhouse <dwmw2@infradead.org>
Signed-off-by: John W. Linville <linville@tuxdriver.com>
2008-01-28 15:06:09 -08:00
Holger Schurig
09d4fad6e8 libertas: fix data packet size errors
I wondered about junk bytes at the end when using "lbsdebug +hex +host"
until I noticed that firmware for the CF card sends my extranous bytes.
It says "I have 20 bytes", I take 20 bytes, but the last 8 bytes of this
are just data junk.

Also, in the new lbs_cmd() where was a size miscalulation
that made itself clear after fixing this bug.

Signed-off-by: Holger Schurig <hs4233@mail.mn-solutions.de>
Signed-off-by: David Woodhouse <dwmw2@infradead.org>
Signed-off-by: John W. Linville <linville@tuxdriver.com>
2008-01-28 15:06:08 -08:00
Li Zefan
abe3ed14d3 libertas: don't cast a pointer to pointer of
Don't cast struct foo * to struct list_head *, it's safe only when
the list member is the first member of struct foo.

Also don't cast struct list_head * to struct foo *.

Signed-off-by: Li Zefan <lizf@cn.fujitsu.com>
Signed-off-by: Holger Schurig <hs4233@mail.mn-solutions.de>
Signed-off-by: David Woodhouse <dwmw2@infradead.org>
Signed-off-by: John W. Linville <linville@tuxdriver.com>
2008-01-28 15:06:07 -08:00
David Woodhouse
6228c0aea5 libertas: Byteswap cmdptr->size in lbs_cmd()
Bad Holger. Always test on big-endian machines, if it's little-endian
you need to be swapping to/from.

Signed-off-by: David Woodhouse <dwmw2@infradead.org>
Signed-off-by: John W. Linville <linville@tuxdriver.com>
2008-01-28 15:06:06 -08:00
David Woodhouse
ad9de29130 libertas: Zero 'pdata_size' field in cmd_ctrl_node reliably.
Otherwise, lbs_process_rx_command() will take the new path for
lbs_cmd() responses, when it shouldn't.

Signed-off-by: David Woodhouse <dwmw2@infradead.org>
Signed-off-by: John W. Linville <linville@tuxdriver.com>
2008-01-28 15:06:06 -08:00
David Woodhouse
2c94404c30 libertas: Move SET_BOOT2_VER command to if_usb where it belongs
This is meaningless for non-USB devices and unimplemented in their
firmware. It's somewhat dubious for USB devices too, but that's a
different story.

Signed-off-by: David Woodhouse <dwmw2@infradead.org>
Signed-off-by: John W. Linville <linville@tuxdriver.com>
2008-01-28 15:06:05 -08:00
David Woodhouse
9088566176 libertas: Don't claim to have checksummed incoming packets.
This explains why we never noticed the corruption of checksums on
outgoing packets... we weren't actually checking them either.

Signed-off-by: David Woodhouse <dwmw2@infradead.org>
Signed-off-by: John W. Linville <linville@tuxdriver.com>
2008-01-28 15:06:04 -08:00
Holger Schurig
675787e29f libertas: handy function to call firmware commands
Using an arbitrary firmware command was actually very painful. One
had to change big switch() statements in cmd.c, cmdresp.c, add
structs to the big union in "struct cmd_ds_command" and add the
define for the CMD_802_11_xxx to the proper place.

With this function, this is now much easier. For now, it implements
a blocking (a.k.a. CMD_OPTION_WAITFORRSP) way where one deals directly
with command requests and response buffers. You can do everything in
one place:

Signed-off-by: Holger Schurig <hs4233@mail.mn-solutions.de>
Signed-off-by: David Woodhouse <dwmw2@infradead.org>
Signed-off-by: John W. Linville <linville@tuxdriver.com>
2008-01-28 15:06:04 -08:00
Holger Schurig
0d61d04210 libertas: make more functions static
These functions were used in the old debugfs code for events, but
as this code is now gone, there's no need to export those functions.

Signed-off-by: Holger Schurig <hs4233@mail.mn-solutions.de>
Signed-off-by: David Woodhouse <dwmw2@infradead.org>
Signed-off-by: John W. Linville <linville@tuxdriver.com>
2008-01-28 15:06:03 -08:00
Holger Schurig
c68b3bbdb5 libertas: remove cmd_ctrl_node->status
There was no code that ever did set this variable.

Signed-off-by: Holger Schurig <hs4233@mail.mn-solutions.de>
Signed-off-by: David Woodhouse <dwmw2@infradead.org>
Signed-off-by: John W. Linville <linville@tuxdriver.com>
2008-01-28 15:06:02 -08:00
Holger Schurig
891f32a1c4 libertas: remove cmd_ctrl_node->cmdflags
There was no code that ever did set this flag.

Signed-off-by: Holger Schurig <hs4233@mail.mn-solutions.de>
Signed-off-by: David Woodhouse <dwmw2@infradead.org>
Signed-off-by: John W. Linville <linville@tuxdriver.com>
2008-01-28 15:06:01 -08:00
David Woodhouse
e775ed7c67 libertas: Consolidate lbs_host_to_card_done() function.
As we move towards having this done by a state machine, start by having
a single 'stuff sent' function, which is called by if_usb/if_sdio/if_cs
after sending both data and commands.

Signed-off-by: David Woodhouse <dwmw2@infradead.org>
Signed-off-by: John W. Linville <linville@tuxdriver.com>
2008-01-28 15:06:01 -08:00
David Woodhouse
f5ece8fc8d libertas: Remove cmd_oid from struct cmd_ctrl_node
This is only needed for SNMP and key operations; it doesn't need to be
preserved outside that context.

Signed-off-by: David Woodhouse <dwmw2@infradead.org>
Signed-off-by: John W. Linville <linville@tuxdriver.com>
2008-01-28 15:06:00 -08:00
David Woodhouse
77d8cf2c09 libertas: Fix memory leak of RX skbs
Signed-off-by: David Woodhouse <dwmw2@infradead.org>
Signed-off-by: John W. Linville <linville@tuxdriver.com>
2008-01-28 15:05:59 -08:00
Michael Buesch
38d1b4ce90 b43: Fix for broken transmission
This patch fixes the transmission problems introduced by
commit f04b3787bbce4567e28069a9ec97dcd804626ac7

I'm not sure if the dummy read is really required.
The old code does it. I think it can't hurt and can possibly
fix some write posting problems (hardware bugs or whatever. Who knows).

Signed-off-by: Michael Buesch <mb@bu3sch.de>
Signed-off-by: John W. Linville <linville@tuxdriver.com>
2008-01-28 15:05:59 -08:00
Michael Buesch
8ed7fc48eb b43: Fix ofdmtab write regression
commit f04b3787bbce4567e28069a9ec97dcd804626ac7 introduced
a regression for the ofdmtable writing.

It incorrectly removed the writing of the high 16bits for
a 32bit table write and initialized the direction identifier
too late.

This patch does also some cleanups to make the code much more
readable and adds a few comments, so non rocket scientists are
also able to understand what this address caching is all about.

Signed-off-by: Michael Buesch <mb@bu3sch.de>
Signed-off-by: John W. Linville <linville@tuxdriver.com>
2008-01-28 15:05:58 -08:00
Tomas Winkler
bb54244be7 iwlwifi: add missing comments
This patch add comments that escaped from the previous merge

Signed-off-by: Tomas Winkler <tomas.winkler@intel.com>
Signed-off-by: John W. Linville <linville@tuxdriver.com>
2008-01-28 15:05:57 -08:00
Tomas Winkler
4fd1f84146 iwlwifi: fix compliation warnings
This patch fixes compilation warnings introduced by 'fix ucode assertion
for RX queue overrun' patch

Signed-off-by: Tomas Winkler <tomas.winkler@intel.com>
Signed-off-by: John W. Linville <linville@tuxdriver.com>
2008-01-28 15:05:56 -08:00
Reinette Chatre
0946687803 iwlwifi: remove HT code from iwl-3945.h
This pach removes HT code from iwl-3945.h - it is not needed here as 3945
does not support HT. The code ended up here during the header file split

Signed-off-by: Reinette Chatre <reinette.chatre@intel.com>
Signed-off-by: Tomas Winkler <tomas.winkler@intel.com>
Signed-off-by: John W. Linville <linville@tuxdriver.com>
2008-01-28 15:05:56 -08:00
Dan Williams
2236761b8c orinoco: always use latest BSS info when caching scan results
Always copy the latest BSS information from the firmware's results to
the driver's BSS table to ensure that everything is up-to-date (IEs,
supported rates, encryption status, etc).

Signed-off-by: Dan Williams <dcbw@redhat.com>
Signed-off-by: John W. Linville <linville@tuxdriver.com>
2008-01-28 15:05:55 -08:00
Adrian Bunk
ef3122463d ipg: add __devexit annotation
ipg_remove() can become __devexit.

Signed-off-by: Adrian Bunk <bunk@kernel.org>
2008-01-28 15:05:54 -08:00