Commit Graph

390028 Commits

Author SHA1 Message Date
Oliver Hartkopp
391ac1282d can: gw: add a per rule limitation of frame hops
Usually the received CAN frames can be processed/routed as much as 'max_hops'
times (which is given at module load time of the can-gw module).
Introduce a new configuration option to reduce the number of possible hops
for a specific gateway rule to a value smaller then max_hops.

Signed-off-by: Oliver Hartkopp <socketcan@hartkopp.net>
Signed-off-by: Marc Kleine-Budde <mkl@pengutronix.de>
2013-08-29 22:58:24 +02:00
Gerhard Sittig
1149108e2f can: mscan: improve clock API use
the .get_clock() callback is run from probe() and might allocate
resources, introduce a .put_clock() callback that is run from remove()
to undo any allocation activities

prepare and enable the clocks in open(), disable and unprepare the
clocks in close() if clocks were acquired during probe(), to not assume
knowledge about which activities are done in probe() and remove()

use devm_get_clk() to lookup the SYS and REF clocks, to have the clocks
put upon device shutdown

store pointers to data structures upon successful allocation already
instead of deferral until complete setup, such that subroutines in the
setup sequence may access those data structures as well to track their
resource acquisition

since clock allocation remains optional, the release callback as well as
the enable/disable calls in open/close are optional as well

Cc: linux-can@vger.kernel.org
Cc: netdev@vger.kernel.org
Signed-off-by: Gerhard Sittig <gsi@denx.de>
Signed-off-by: Anatolij Gustschin <agust@denx.de>
Signed-off-by: Marc Kleine-Budde <mkl@pengutronix.de>
2013-08-29 22:49:35 +02:00
Gerhard Sittig
3a09b12e0c can: mscan: add a comment on reg to idx mapping
add a comment about the magic of deriving an MSCAN component index
from the peripheral's physical address / register offset

Cc: linux-can@vger.kernel.org
Cc: netdev@vger.kernel.org
Signed-off-by: Gerhard Sittig <gsi@denx.de>
Signed-off-by: Anatolij Gustschin <agust@denx.de>
Signed-off-by: Marc Kleine-Budde <mkl@pengutronix.de>
2013-08-29 22:49:35 +02:00
Daniel Borkmann
7ec06da81d net: packet: document available fanout policies
Update documentation to add fanout policies that are available.

Signed-off-by: Daniel Borkmann <dborkman@redhat.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
2013-08-29 16:43:29 -04:00
Daniel Borkmann
f55d112e52 net: packet: use reciprocal_divide in fanout_demux_hash
Instead of hard-coding reciprocal_divide function, use the inline
function from reciprocal_div.h.

Signed-off-by: Daniel Borkmann <dborkman@redhat.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
2013-08-29 16:43:29 -04:00
Daniel Borkmann
5df0ddfbc9 net: packet: add randomized fanout scheduler
We currently allow for different fanout scheduling policies in pf_packet
such as scheduling by skb's rxhash, round-robin, by cpu, and rollover.
Also allow for a random, equidistributed selection of the socket from the
fanout process group.

Signed-off-by: Daniel Borkmann <dborkman@redhat.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
2013-08-29 16:43:29 -04:00
Sergei Shtylyov
488594883e sh_eth: no need to call ether_setup()
There's no need to call ether_setup() in the driver since prior alloc_etherdev()
call already arranges for it.

Suggested-by: Denis Kirjanov <kda@linux-powerpc.org>
Signed-off-by: Sergei Shtylyov <sergei.shtylyov@cogentembedded.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
2013-08-29 16:39:31 -04:00
David S. Miller
d7ef9b04a2 Merge branch 'bond_vlan'
Veaceslav Falico says:

====================
bonding: remove vlan special handling

v1: Per Jiri's advice, remove the exported netdev_upper struct to keep it
    inside dev.c only, and instead implement a macro to iterate over the
    list and return only net_device *.
v2: Jiri noted that we need to see every upper device, but not only the
    first level. Modify the netdev_upper logic to include a list of lower
    devices and for both upper/lower lists every device would see both its
    first-level devices and every other devices that is lower/upper of it.
    Also, convert some annoying spamming warnings to pr_debug in
    bond_arp_send_all.
v3: move renaming part completely to patch 1 (did I forget to git add
    before commiting?) and address Jiri's input about comments/style of
    patch 2.
v4: as Vlad found spotted, bond_arp_send_all() won't work in a config where
    we have a device with ip on top of our upper vlan. It fails to send
    packets because we don't tag the packet, while the device on top of
    vlan will emit tagged packets through this vlan. Fix this by first
    searching for all upper vlans, and for each vlan - for the devs on top
    of it. If we find the dev - then tag the packet with the underling's
    vlan_id, otherwise just search the old way - for all devices on top of
    bonding. Also, move the version changes under "---" so they won't get
    into the commit message, if/when applied.

The aim of this patchset is to remove bondings' own vlan handling as much
as possible and replace it with the netdev upper device functionality.

The upper device functionality is extended to include also lower devices
and to have, for each device, a full view of every lower and upper device,
but not only the first-level ones. This might permit in the future to
avoid, for any grouping/teaming/upper/lower devices, to maintain its own
lists of slaves/vlans/etc.

This is achieved by adding a helper function to upper dev list handling -
netdev_upper_get_next_dev(dev, iter), which returns the next device after
the list_head **iter, and sets *iter to the next list_head *. This patchset
also adds netdev_for_each_upper_dev(dev, upper, iter), which iterates
through the whole dev->upper_dev_list, setting upper to the net_device.
The only special treatment of vlans remains in rlb code.

This patchset solves several issues with bonding, simplifies it overall,
RCUify further and exports upper list functions for any other users which
might also want to get rid of its own vlan_lists or slaves.

I'm testing it continuously currently, no issues found, will update on
anything.
====================

Signed-off-by: David S. Miller <davem@davemloft.net>
2013-08-29 16:19:50 -04:00
Veaceslav Falico
3e32582f7d bonding: pr_debug instead of pr_warn in bond_arp_send_all
They're simply annoying and will spam dmesg constantly if we hit them, so
convert to pr_debug so that we still can access them in case of debugging.

CC: Jay Vosburgh <fubar@us.ibm.com>
CC: Andy Gospodarek <andy@greyhouse.net>
Signed-off-by: Veaceslav Falico <vfalico@redhat.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
2013-08-29 16:19:43 -04:00
Veaceslav Falico
e868b0c938 bonding: remove vlan_list/current_alb_vlan
Currently there are no real users of vlan_list/current_alb_vlan, only the
helpers which maintain them, so remove them.

CC: Jay Vosburgh <fubar@us.ibm.com>
CC: Andy Gospodarek <andy@greyhouse.net>
Signed-off-by: Veaceslav Falico <vfalico@redhat.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
2013-08-29 16:19:43 -04:00
Veaceslav Falico
5bf94b839a bonding: make alb_send_learning_packets() use upper dev list
Currently, if there are vlans on top of bond, alb_send_learning_packets()
will never send LPs from the bond itself (i.e. untagged), which might leave
untagged clients unupdated.

Also, the 'circular vlan' logic (i.e. update only MAX_LP_BURST vlans at a
time, and save the last vlan for the next update) is really suboptimal - in
case of lots of vlans it will take a lot of time to update every vlan. It
is also never called in any hot path and sends only a few small packets -
thus the optimization by itself is useless.

So remove the whole current_alb_vlan/MAX_LP_BURST logic from
alb_send_learning_packets(). Instead, we'll first send a packet untagged
and then traverse the upper dev list, sending a tagged packet for each vlan
found. Also, remove the MAX_LP_BURST define - we already don't need it.

CC: Jay Vosburgh <fubar@us.ibm.com>
CC: Andy Gospodarek <andy@greyhouse.net>
Signed-off-by: Veaceslav Falico <vfalico@redhat.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
2013-08-29 16:19:43 -04:00
Veaceslav Falico
7aa6498123 bonding: split alb_send_learning_packets()
Create alb_send_lp_vid(), which will handle the skb/lp creation, vlan
tagging and sending, and use it in alb_send_learning_packets().

This way all the logic remains in alb_send_learning_packets(), which
becomes a lot more cleaner and easier to understand.

CC: Jay Vosburgh <fubar@us.ibm.com>
CC: Andy Gospodarek <andy@greyhouse.net>
Signed-off-by: Veaceslav Falico <vfalico@redhat.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
2013-08-29 16:19:43 -04:00
Veaceslav Falico
a59d3d21ea bonding: use vlan_uses_dev() in __bond_release_one()
We always hold the rtnl_lock() in __bond_release_one(), so use
vlan_uses_dev() instead of bond_vlan_used().

CC: Jay Vosburgh <fubar@us.ibm.com>
CC: Andy Gospodarek <andy@greyhouse.net>
Signed-off-by: Veaceslav Falico <vfalico@redhat.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
2013-08-29 16:19:43 -04:00
Veaceslav Falico
50223ce4be bonding: convert bond_has_this_ip() to use upper devices
Currently, bond_has_this_ip() is aware only of vlan upper devices, and thus
will return false if the address is associated with the upper bridge or any
other device, and thus will break the arp logic.

Fix this by using the upper device list. For every upper device we verify
if the address associated with it is our address, and if yes - return true.

CC: Jay Vosburgh <fubar@us.ibm.com>
CC: Andy Gospodarek <andy@greyhouse.net>
Signed-off-by: Veaceslav Falico <vfalico@redhat.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
2013-08-29 16:19:42 -04:00
Veaceslav Falico
27bc11e638 bonding: make bond_arp_send_all use upper device list
Currently, bond_arp_send_all() is aware only of vlans, which breaks
configurations like bond <- bridge (or any other 'upper' device) with IP
(which is quite a common scenario for virt setups).

To fix this we convert the bond_arp_send_all() to first verify if the rt
device is the bond itself, and if not - to go through its list of upper
vlans and their respectiv upper devices (if the vlan's upper device matches
- tag the packet), if still not found - go through all of our upper list
devices to see if any of them match the route device for the target. If the
match is a vlan device - we also save its vlan_id and tag it in
bond_arp_send().

Also, clean the function a bit to be more readable.

CC: Vlad Yasevich <vyasevic@redhat.com>
CC: Jay Vosburgh <fubar@us.ibm.com>
CC: Andy Gospodarek <andy@greyhouse.net>
Signed-off-by: Veaceslav Falico <vfalico@redhat.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
2013-08-29 16:19:42 -04:00
Veaceslav Falico
c752af2c55 bonding: use netdev_upper list in bond_vlan_used
Convert bond_vlan_used() to traverse the upper device list to see if we
have any vlans above us. It's protected by rcu, and in case we are holding
rtnl_lock we should call vlan_uses_dev() instead - it's faster.

CC: Jay Vosburgh <fubar@us.ibm.com>
CC: Andy Gospodarek <andy@greyhouse.net>
Signed-off-by: Veaceslav Falico <vfalico@redhat.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
2013-08-29 16:19:42 -04:00
Veaceslav Falico
8b5be8561b net: add netdev_for_each_upper_dev_rcu()
The new macro netdev_for_each_upper_dev_rcu(dev, upper, iter) iterates
through the dev->upper_dev_list starting from the first element, using
the netdev_upper_get_next_dev_rcu(dev, &iter).

Must be called under RCU read lock.

CC: "David S. Miller" <davem@davemloft.net>
CC: Eric Dumazet <edumazet@google.com>
CC: Jiri Pirko <jiri@resnulli.us>
CC: Alexander Duyck <alexander.h.duyck@intel.com>
CC: Cong Wang <amwang@redhat.com>
Signed-off-by: Veaceslav Falico <vfalico@redhat.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
2013-08-29 16:19:42 -04:00
Veaceslav Falico
48311f4685 net: add netdev_upper_get_next_dev_rcu(dev, iter)
This function returns the next dev in the dev->upper_dev_list after the
struct list_head **iter position, and updates *iter accordingly. Returns
NULL if there are no devices left.

Caller must hold RCU read lock.

CC: "David S. Miller" <davem@davemloft.net>
CC: Eric Dumazet <edumazet@google.com>
CC: Jiri Pirko <jiri@resnulli.us>
CC: Alexander Duyck <alexander.h.duyck@intel.com>
CC: Cong Wang <amwang@redhat.com>
Signed-off-by: Veaceslav Falico <vfalico@redhat.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
2013-08-29 16:19:42 -04:00
Veaceslav Falico
620f3186ca net: remove search_list from netdev_adjacent
We already don't need it cause we see every upper/lower device in the list
already.

CC: "David S. Miller" <davem@davemloft.net>
CC: Eric Dumazet <edumazet@google.com>
CC: Jiri Pirko <jiri@resnulli.us>
CC: Alexander Duyck <alexander.h.duyck@intel.com>
CC: Cong Wang <amwang@redhat.com>
Signed-off-by: Veaceslav Falico <vfalico@redhat.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
2013-08-29 16:19:42 -04:00
Veaceslav Falico
5d261913ca net: add lower_dev_list to net_device and make a full mesh
This patch adds lower_dev_list list_head to net_device, which is the same
as upper_dev_list, only for lower devices, and begins to use it in the same
way as the upper list.

It also changes the way the whole adjacent device lists work - now they
contain *all* of upper/lower devices, not only the first level. The first
level devices are distinguished by the bool neighbour field in
netdev_adjacent, also added by this patch.

There are cases when a device can be added several times to the adjacent
list, the simplest would be:

     /---- eth0.10 ---\
eth0-		       --- bond0
     \---- eth0.20 ---/

where both bond0 and eth0 'see' each other in the adjacent lists two times.
To avoid duplication of netdev_adjacent structures ref_nr is being kept as
the number of times the device was added to the list.

The 'full view' is achieved by adding, on link creation, all of the
upper_dev's upper_dev_list devices as upper devices to all of the
lower_dev's lower_dev_list devices (and to the lower_dev itself), and vice
versa. On unlink they are removed using the same logic.

I've tested it with thousands vlans/bonds/bridges, everything works ok and
no observable lags even on a huge number of interfaces.

Memory footprint for 128 devices interconnected with each other via both
upper and lower (which is impossible, but for the comparison) lists would be:

128*128*2*sizeof(netdev_adjacent) = 1.5MB

but in the real world we usualy have at most several devices with slaves
and a lot of vlans, so the footprint will be much lower.

CC: "David S. Miller" <davem@davemloft.net>
CC: Eric Dumazet <edumazet@google.com>
CC: Jiri Pirko <jiri@resnulli.us>
CC: Alexander Duyck <alexander.h.duyck@intel.com>
CC: Cong Wang <amwang@redhat.com>
Signed-off-by: Veaceslav Falico <vfalico@redhat.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
2013-08-29 16:19:42 -04:00
Veaceslav Falico
aa9d85605f net: rename netdev_upper to netdev_adjacent
Rename the structure to reflect the upcoming addition of lower_dev_list.

CC: "David S. Miller" <davem@davemloft.net>
CC: Eric Dumazet <edumazet@google.com>
CC: Jiri Pirko <jiri@resnulli.us>
CC: Alexander Duyck <alexander.h.duyck@intel.com>
CC: Cong Wang <amwang@redhat.com>
Signed-off-by: Veaceslav Falico <vfalico@redhat.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
2013-08-29 16:19:41 -04:00
David S. Miller
6d508cce92 Merge branch 'master' of git://git.kernel.org/pub/scm/linux/kernel/git/jkirsher/net-next
Jeff Kirsher says:

====================
This series contains updates to ixgbe.

Jacob provides a fix for 82599 devices where it can potentially keep link
lights up when the adapter has gone down.

Mark provides a fix to resolve the possible use of uninitialized memory
by checking the return value on EEPROM reads.

Don provides 2 patches, one to fix a issue where we were traversing the
Tx ring with the value of IXGBE_NUM_RX_QUEUES which currently happens
to have the correct value but this is misleading.  A change later, could
easily make this no longer correct so when traversing the Tx ring, use
netdev->num_tx_queues.  His second patch does some minor clean ups of log
messages.

Emil provides the remaining ixgbe patches.  First he fixes the link test
where forcing the laser before the link check can lead to inconsistent
results because it does not guarantee that the link will be negotiated
correctly.  Then he initializes the message buffer array to 0 in order
to avoid using random numbers from the memory as a MAC address for the
VF.  Emil also fixes the read loop for the I2C data to account for the
offset for SFP+ modules.  Lastly, Emil provides several patches to add
support for QSFP modules where 1Gbps support is added as well as support
for older QSFP active direct attach cables which pre-date SFF-8436 v3.6.

v2: Fixed patch 4 description and added blank line based on feedback from
    Sergei Shtylyov
====================

Signed-off-by: David S. Miller <davem@davemloft.net>
2013-08-29 16:13:32 -04:00
Fabio Estevam
322555f52b fec: Use NAPI_POLL_WEIGHT
Instead of using a custom 'FEC_NAPI_WEIGHT', just use the generic
'NAPI_POLL_WEIGHT' definition instead.

Signed-off-by: Fabio Estevam <fabio.estevam@freescale.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
2013-08-29 15:58:34 -04:00
Daniel Borkmann
7613f5fe11 net: sctp: sctp_verify_init: clean up mandatory checks and add comment
Add a comment related to RFC4960 explaning why we do not check for initial
TSN, and while at it, remove yoda notation checks and clean up code from
checks of mandatory conditions. That's probably just really minor, but makes
reviewing easier.

Signed-off-by: Daniel Borkmann <dborkman@redhat.com>
Acked-by: Neil Horman <nhorman@tuxdriver.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
2013-08-29 15:54:48 -04:00
Eric Dumazet
95bd09eb27 tcp: TSO packets automatic sizing
After hearing many people over past years complaining against TSO being
bursty or even buggy, we are proud to present automatic sizing of TSO
packets.

One part of the problem is that tcp_tso_should_defer() uses an heuristic
relying on upcoming ACKS instead of a timer, but more generally, having
big TSO packets makes little sense for low rates, as it tends to create
micro bursts on the network, and general consensus is to reduce the
buffering amount.

This patch introduces a per socket sk_pacing_rate, that approximates
the current sending rate, and allows us to size the TSO packets so
that we try to send one packet every ms.

This field could be set by other transports.

Patch has no impact for high speed flows, where having large TSO packets
makes sense to reach line rate.

For other flows, this helps better packet scheduling and ACK clocking.

This patch increases performance of TCP flows in lossy environments.

A new sysctl (tcp_min_tso_segs) is added, to specify the
minimal size of a TSO packet (default being 2).

A follow-up patch will provide a new packet scheduler (FQ), using
sk_pacing_rate as an input to perform optional per flow pacing.

This explains why we chose to set sk_pacing_rate to twice the current
rate, allowing 'slow start' ramp up.

sk_pacing_rate = 2 * cwnd * mss / srtt

v2: Neal Cardwell reported a suspect deferring of last two segments on
initial write of 10 MSS, I had to change tcp_tso_should_defer() to take
into account tp->xmit_size_goal_segs

Signed-off-by: Eric Dumazet <edumazet@google.com>
Cc: Neal Cardwell <ncardwell@google.com>
Cc: Yuchung Cheng <ycheng@google.com>
Cc: Van Jacobson <vanj@google.com>
Cc: Tom Herbert <therbert@google.com>
Acked-by: Yuchung Cheng <ycheng@google.com>
Acked-by: Neal Cardwell <ncardwell@google.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
2013-08-29 15:50:06 -04:00
Hannes Frederic Sowa
b800c3b966 ipv6: drop fragmented ndisc packets by default (RFC 6980)
This patch implements RFC6980: Drop fragmented ndisc packets by
default. If a fragmented ndisc packet is received the user is informed
that it is possible to disable the check.

Cc: Fernando Gont <fernando@gont.com.ar>
Cc: YOSHIFUJI Hideaki <yoshfuji@linux-ipv6.org>
Signed-off-by: Hannes Frederic Sowa <hannes@stressinduktion.org>
Signed-off-by: David S. Miller <davem@davemloft.net>
2013-08-29 15:32:08 -04:00
Boris BREZILLON
a3a975b1df ARM: at91/dt: fix phy address in sama5xmb to match the reg property
Fix phy0 address to match the reg property defined in phy0 node.

Signed-off-by: Boris BREZILLON <b.brezillon@overkiz.com>
Acked-by: Nicolas Ferre <nicolas.ferre@atmel.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
2013-08-29 15:21:45 -04:00
Boris BREZILLON
7daa78e352 net/cadence/macb: fix invalid 0 return if no phy is discovered on mii init
Replace misleading -1 (-EPERM) by a more appropriate return code (-ENXIO)
in macb_mii_probe function.
Save macb_mii_probe return before branching to err_out_unregister to avoid
erronous 0 return.

Signed-off-by: Boris BREZILLON <b.brezillon@overkiz.com>
Acked-by: Nicolas Ferre <nicolas.ferre@atmel.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
2013-08-29 15:21:45 -04:00
Florian Fainelli
fd094808a0 bridge: inherit slave devices needed_headroom
Some slave devices may have set a dev->needed_headroom value which is
different than the default one, most likely in order to prepend a
hardware descriptor in front of the Ethernet frame to send. Whenever a
new slave is added to a bridge, ensure that we update the
needed_headroom value accordingly to account for the slave
needed_headroom value.

Signed-off-by: Florian Fainelli <f.fainelli@gmail.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
2013-08-29 15:17:09 -04:00
Daniel Borkmann
76bfd89844 net: sctp: reorder sctp_globals to reduce cacheline usage
Reduce cacheline usage from 2 to 1 cacheline for sctp_globals structure. By
reordering elements, we can close gaps and simply achieve the following:

Current situation:
  /* size: 80, cachelines: 2, members: 10 */
  /* sum members: 57, holes: 4, sum holes: 16 */
  /* padding: 7 */
  /* last cacheline: 16 bytes */

Afterwards:
  /* size: 64, cachelines: 1, members: 10 */
  /* padding: 7 */

Signed-off-by: Daniel Borkmann <dborkman@redhat.com>
Acked-by: Neil Horman <nhorman@tuxdriver.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
2013-08-29 14:55:54 -04:00
Jisheng Zhang
03536cc3ad net: mdio-sun4i: Convert to devm_* api
Use devm_ioremap_resource instead of of_iomap() and devm_kzalloc()
instead of kmalloc() to make cleanup paths simpler. This patch also
fixes the resource leak caused by missing corresponding iounamp()
of the of_iomap().

Signed-off-by: Jisheng Zhang <jszhang@marvell.com>
Acked-by: Maxime Ripard <maxime.ripard@free-electrons.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
2013-08-29 14:54:49 -04:00
Emil Tantilov
9a84fea2ec ixgbe: add support for older QSFP active DA cables
This patch adds support for QSFP active direct attach (DA) cables which
pre-date SFF-8436 v3.6.

Signed-off-by: Emil Tantilov <emil.s.tantilov@intel.com>
Tested-by: Phil Schmitt <phillip.j.schmitt@intel.com>
Signed-off-by: Jeff Kirsher <jeffrey.t.kirsher@intel.com>
2013-08-29 03:36:55 -07:00
Emil Tantilov
987e1d56b3 ixgbe: include QSFP PHY types in ixgbe_is_sfp()
This patch makes sure that QSFP+ modules use the SFP+ code path for
setting up link.

Signed-off-by: Emil Tantilov <emil.s.tantilov@intel.com>
Tested-by: Phil Schmitt <phillip.j.schmitt@intel.com>
Signed-off-by: Jeff Kirsher <jeffrey.t.kirsher@intel.com>
2013-08-29 03:30:37 -07:00
Emil Tantilov
61aaf9e807 ixgbe: add 1Gbps support for QSFP+
This patch adds GB speed support for QSFP+ modules.
Autonegotiation is not supported with QSFP+. The user will have to set
the desired speed on both link partners using ethtool advertise setting.

Signed-off-by: Emil Tantilov <emil.s.tantilov@intel.com>
Tested-by: Phil Schmitt <phillip.j.schmitt@intel.com>
Signed-off-by: Jeff Kirsher <jeffrey.t.kirsher@intel.com>
2013-08-29 03:24:00 -07:00
Emil Tantilov
31c7d2b06b ixgbe: fix SFF data dumps of SFP+ modules from an offset
This patch fixes the read loop for the I2C data to account for the offset.

Also includes a whitespace cleanup and removes ret_val as it is not needed.

CC: Ben Hutchings <bhutchings@solarflare.com>
Reported-by: Ben Hutchings <bhutchings@solarflare.com>
Signed-off-by: Emil Tantilov <emil.s.tantilov@intel.com>
Tested-by: Phil Schmitt <phillip.j.schmitt@intel.com>
Reviewed-by: Ben Hutchings <bhutchings@solarflare.com>
Signed-off-by: Jeff Kirsher <jeffrey.t.kirsher@intel.com>
2013-08-29 03:17:11 -07:00
Don Skidmore
1b1bf31a12 ixgbe: cleanup some log messages
Some minor log messages cleanup, changing the level one message is logged,
adding a bit of detail to another and put all the text on one line.

Signed-off-by: Don Skidmore <donald.c.skidmore@intel.com>
Tested-by: Phil Schmitt <phillip.j.schmitt@intel.com>
Signed-off-by: Jeff Kirsher <jeffrey.t.kirsher@intel.com>
2013-08-29 03:10:37 -07:00
Emil Tantilov
b08e1ed9cf ixgbe: zero out mailbox buffer on init
This patch initializes the msgbuf array to 0 in order to avoid using random
numbers from the memory as MAC address for the VF.

Signed-off-by: Emil Tantilov <emil.s.tantilov@intel.com>
Tested-by: Phil Schmitt <phillip.j.schmitt@intel.com>
Signed-off-by: Jeff Kirsher <jeffrey.t.kirsher@intel.com>
2013-08-29 03:04:18 -07:00
Emil Tantilov
4ec375b1ec ixgbe: fix link test when connected to 1Gbps link partner
This patch is a partial reverse of:
commit dfcc4615f0
Author: Jacob Keller <jacob.e.keller@intel.com>
Date: Thu Nov 8 07:07:08 2012 +0000

  ixgbe: ethtool ixgbe_diag_test cleanup

Specifically forcing the laser before the link check can lead to
inconsistent results because it does not guarantee that the link will be
negotiated correctly. Such is the case when dual speed SFP+ module is
connected to a gigabit link partner.

Signed-off-by: Emil Tantilov <emil.s.tantilov@intel.com>
Tested-by: Phil Schmitt <phillip.j.schmitt@intel.com>
Signed-off-by: Jeff Kirsher <jeffrey.t.kirsher@intel.com>
2013-08-29 02:58:04 -07:00
Don Skidmore
bd8a1b1290 ixgbe: fix incorrect limit value in ring transverse
We were transversing the tx_ring with IXGBE_NUM_RX_QUEUES.  Now this define
happens to have the correct value but this is misleading and a change later
could easily make this no longer true.  I updated it to netdev->num_tx_queues
like we use in ixgbe_get_strings().

Signed-off-by: Don Skidmore <donald.c.skidmore@intel.com>
Tested-by: Phil Schmitt <phillip.j.schmitt@intel.com>
Signed-off-by: Jeff Kirsher <jeffrey.t.kirsher@intel.com>
2013-08-29 02:51:56 -07:00
Mark Rustad
be0c27b4ed ixgbe: Check return value on eeprom reads
This patch fixes the possible use of uninitialized memory by checking the
return value on eeprom reads. These issues were identified by static
analysis. In many cases error messages will be produced so that corrupted
eeprom issues will be more visible.

Signed-off-by: Mark Rustad <mark.d.rustad@intel.com>
Tested-by: Phil Schmitt <phillip.j.schmitt@intel.com>
Signed-off-by: Jeff Kirsher <jeffrey.t.kirsher@intel.com>
2013-08-29 02:45:38 -07:00
Jacob Keller
f4f1040ae6 ixgbe: disable link when adapter goes down
This patch fixes an issue with the 82599 adapter where it can potentially keep
link lights up when the adapter has gone down. The patch adds a function which
ensures link is disabled, and calls this function when the adapter transitions
to a down state.

Signed-off-by: Jacob Keller <jacob.e.keller@intel.com>
Tested-by: Phil Schmitt <phillip.j.schmitt@intel.com>
Signed-off-by: Jeff Kirsher <jeffrey.t.kirsher@intel.com>
2013-08-29 02:39:26 -07:00
David S. Miller
4c9d546f6c Merge branch 'for-davem' of git://git.kernel.org/pub/scm/linux/kernel/git/bwh/sfc-next
Ben Hutchings says:

====================
1. Further cleanup and refactoring in preparation for EF10.
2. Remove ethtool stats that are always zero on Falcon boards.
3. Add an ethtool stat for merged TX completions.
4. Prepare to support merged RX completions.
5. Prepare to support more hwmon sensors.
6. Add support for new events that are generated by EF10 firmware.
7. Update MC reboot detection for EF10.
====================

Signed-off-by: David S. Miller <davem@davemloft.net>
2013-08-29 01:56:01 -04:00
David S. Miller
cc328deac5 Included changes:
- set the protocol field in the skb structure according to the encapsulated
   payload
 - make the gateway component send a uevent in case of "gw client mode"
   de-selection
 - increment version number
 - minor code rearrangement
 -----BEGIN PGP SIGNATURE-----
 Version: GnuPG v2.0.20 (GNU/Linux)
 
 iQIcBAABCAAGBQJSHcUOAAoJEADl0hg6qKeOvKgQAJXYAreupV+M6lNOSYLpuHcF
 kI8+TdhNqLb/zb9zQGEfm+iU847GDTcvQfnVnpKFtfIN7HZWNYl3oYePK5fJx7La
 FQBWN3hgi2fliDQ2lzjth9bw6RSiANYGXNvaTHWsgwVr+Wfq1hG3UOulf6k01vNO
 9+CGF9u2XHPTH/x33ZKyVshX70kBSsIGKJIkaGRnCed02WOw9PWCoN2Pg+vsRLFJ
 jYu2JUO/QaQr0cCYHzfc+TAZorhbfyoHoYuM5CKq8vK+S2lVQQE9PXNq9TH2sVfi
 PlFzdfdb+H0M9vmYySj+opddhCw/93Gat+zfJeE+GmqihsN5lcq69VgDHYke6B57
 gwOvydB2xXDEHPQ2tTh93YYJTe7lO1Dy4dDidfxlirvpH9iWT+eZSHQbhce7OuIB
 b+lv4xkiFCyJvu8TRMCx/W8qG+sgp1UPicSFaodmQDU5k/vL44EwxvFlEMFYdsWK
 NZLsVS0+eiuhzkNwFJdaePHEd6ejUf7gTqHmugJsJUXPTwUoYVGuejhoPTNOCJKo
 9vkSJ+Xt82XfTOyKKomrN9IisdxYuKv5Q4HzjvFHasjTxADBpYOCxy/JWa0yl9nv
 YvyRGz1XoEik7FTP78EcpS2cDAQIW8aLF1LN+wbJiPyhCYUDJMlWxYIm3AA/Jy6v
 gjQ7Ztfjb2tsz4D0IUdb
 =jA/h
 -----END PGP SIGNATURE-----

Merge tag 'batman-adv-for-davem' of git://git.open-mesh.org/linux-merge

Included changes:
- set the protocol field in the skb structure according to the encapsulated
  payload
- make the gateway component send a uevent in case of "gw client mode"
  de-selection
- increment version number
- minor code rearrangement

Signed-off-by: David S. Miller <davem@davemloft.net>
2013-08-29 01:44:24 -04:00
Dan Carpenter
80b17be70b qlcnic: underflow in qlcnic_validate_max_tx_rings()
This function checks the upper bound but it doesn't check for negative
numbers:

	if (txq > QLCNIC_MAX_TX_RINGS) {

I've solved this by making "txq" a u32 type.  I chose that because
->tx_count in the ethtool_channels struct is a __u32.

This bug was added in aa4a1f7df7 ('qlcnic: Enable Tx queue changes using
ethtool for 82xx Series adapter.').

Signed-off-by: Dan Carpenter <dan.carpenter@oracle.com>
Acked-by: Himanshu Madhani <himanshu.madhani@qlogic.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
2013-08-29 01:24:08 -04:00
David S. Miller
823a19e0cf Merge branch 'xen-netback'
Wei Liu says:

====================
xen-netback: switch to NAPI + kthread 1:1 model

This series implements NAPI + kthread 1:1 model for Xen netback.

This model
 - provides better scheduling fairness among vifs
 - is prerequisite for implementing multiqueue for Xen network driver

The second patch has the real meat:
 - make use of NAPI to mitigate interrupt
 - kthreads are not bound to CPUs any more, so that we can take
   advantage of backend scheduler and trust it to do the right thing

Benchmark is done on a Dell T3400 workstation with 4 cores, running 4
DomUs. Netserver runs in Dom0. DomUs do netperf to Dom0 with
following command: /root/netperf -H Dom0 -fm -l120

IRQs are distributed to 4 cores by hand in the new model, while in the
old model vifs are automatically distributed to 4 kthreads.

* New model
%Cpu0  :  0.5 us, 20.3 sy,  0.0 ni, 28.9 id,  0.0 wa,  0.0 hi, 24.4 si, 25.9 st
%Cpu1  :  0.5 us, 17.8 sy,  0.0 ni, 28.8 id,  0.0 wa,  0.0 hi, 27.7 si, 25.1 st
%Cpu2  :  0.5 us, 18.8 sy,  0.0 ni, 30.7 id,  0.0 wa,  0.0 hi, 22.9 si, 27.1 st
%Cpu3  :  0.0 us, 20.1 sy,  0.0 ni, 30.4 id,  0.0 wa,  0.0 hi, 22.7 si, 26.8 st
Throughputs: 2027.89 2025.95 2018.57 2016.23 aggregated: 8088.64

* Old model
%Cpu0  :  0.5 us, 68.8 sy,  0.0 ni, 16.1 id,  0.5 wa,  0.0 hi,  2.8 si, 11.5 st
%Cpu1  :  0.4 us, 45.1 sy,  0.0 ni, 31.1 id,  0.4 wa,  0.0 hi,  2.1 si, 20.9 st
%Cpu2  :  0.9 us, 44.8 sy,  0.0 ni, 30.9 id,  0.0 wa,  0.0 hi,  1.3 si, 22.2 st
%Cpu3  :  0.8 us, 46.4 sy,  0.0 ni, 28.3 id,  1.3 wa,  0.0 hi,  2.1 si, 21.1 st
Throughputs: 1899.14 2280.43 1963.33 1893.47 aggregated: 8036.37

We can see that the impact is mainly on CPU usage. The new model moves
processing from kthread to NAPI (software interrupt).
====================

Signed-off-by: David S. Miller <davem@davemloft.net>
2013-08-29 01:18:52 -04:00
Wei Liu
7376419a46 xen-netback: rename functions
As we move to 1:1 model and melt xen_netbk and xenvif together, it would
be better to use single prefix for all functions in xen-netback.

Signed-off-by: Wei Liu <wei.liu2@citrix.com>
Acked-by: Ian Campbell <ian.campbell@citrix.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
2013-08-29 01:18:04 -04:00
Wei Liu
b3f980bd82 xen-netback: switch to NAPI + kthread 1:1 model
This patch implements 1:1 model netback. NAPI and kthread are utilized
to do the weight-lifting job:

- NAPI is used for guest side TX (host side RX)
- kthread is used for guest side RX (host side TX)

Xenvif and xen_netbk are made into one structure to reduce code size.

This model provides better scheduling fairness among vifs. It is also
prerequisite for implementing multiqueue for Xen netback.

Signed-off-by: Wei Liu <wei.liu2@citrix.com>
Acked-by: Ian Campbell <ian.campbell@citrix.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
2013-08-29 01:18:04 -04:00
Wei Liu
43e9d19432 xen-netback: remove page tracking facility
The data flow from DomU to DomU on the same host in current copying
scheme with tracking facility:

       copy
DomU --------> Dom0          DomU
 |                            ^
 |____________________________|
             copy

The page in Dom0 is a page with valid MFN. So we can always copy from
page Dom0, thus removing the need for a tracking facility.

       copy           copy
DomU --------> Dom0 -------> DomU

Simple iperf test shows no performance regression (obviously we copy
twice either way):

  W/  tracking: ~5.3Gb/s
  W/o tracking: ~5.4Gb/s

Signed-off-by: Wei Liu <wei.liu2@citrix.com>
Acked-by: Ian Campbell <ian.campbell@citrix.com>
Acked-by: Matt Wilson <msw@amazon.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
2013-08-29 01:18:04 -04:00
Antonio Quartulli
c6eaa3f067 batman-adv: send GW_DEL event when the gw client mode is deselected
Whenever the GW client mode is deselected, a DEL event has
to be sent in order to tell userspace that the current
gateway has been lost. Send the uevent on state change only
if a gateway was currently selected.

Reported-by: Marek Lindner <lindner_marek@yahoo.de>
Signed-off-by: Antonio Quartulli <antonio@open-mesh.com>
Signed-off-by: Marek Lindner <lindner_marek@yahoo.de>
2013-08-28 11:33:00 +02:00
Simon Wunderlich
c00a072d3f batman-adv: Start new development cycle
Signed-off-by: Simon Wunderlich <siwu@hrz.tu-chemnitz.de>
Signed-off-by: Antonio Quartulli <ordex@autistici.org>
2013-08-28 11:31:52 +02:00