Commit Graph

200736 Commits

Author SHA1 Message Date
Kan-Ru Chen
4098609898 OMAP2: Devkit8000: Setup LCD reset
This patch corrects the LCD reset pin configuration.

Original code from early devkit8000 patch sets the TWL4030 GPIO_1
to EHCI_nOC and TWL4030_GPIO_MAX+1 to ledA. Indeed these two pins
are both LCD_PWREN. Setup the lcd reset_gpio properly so it can be
disabled when other display is turned on.

Signed-off-by: Kan-Ru Chen <kanru@0xlab.org>
Signed-off-by: Tony Lindgren <tony@atomide.com>
2010-07-05 17:04:40 +03:00
Kan-Ru Chen
31c73f74f3 OMAP2: Devkit8000: Enable DVI-D output
This patch corrects the DVI-D output setup of Devkit8000

Devkit8000 has different DVI reset pin with the BeagleBoard.
On Devkit8000 the TWL4030 GPIO_7 is assigned to do the job.

Signed-off-by: Kan-Ru Chen <kanru@0xlab.org>
Signed-off-by: Tony Lindgren <tony@atomide.com>
2010-07-05 17:04:40 +03:00
Thomas Weber
61d07ef4b4 OMAP2: Devkit8000: change panel to generic panel
Choose the generic panel for lcd code of Devkit8000.

Signed-off-by: Thomas Weber <weber@corscience.de>
Signed-off-by: Tony Lindgren <tony@atomide.com>
2010-07-05 17:04:40 +03:00
Thomas Weber
5fd58b5103 OMAP2: Devkit8000: Cleanup for power supplies
Corrected the wrong power supplies in devkit8000 code.

Add supply for ads7846 to support the new regulator framework for
touchscreen.

Signed-off-by: Thomas Weber <weber@corscience.de>
Signed-off-by: Tony Lindgren <tony@atomide.com>
2010-07-05 17:04:39 +03:00
Christoph Egger
847e951b99 Removing dead MACH_OMAP2_H4_USB1
MACH_OMAP2_H4_USB1 doesn't exist in Kconfig, therefore removing all
references for it from the source code.

Signed-off-by: Christoph Egger <siccegge@cs.fau.de>
Signed-off-by: Tony Lindgren <tony@atomide.com>
2010-07-05 17:03:59 +03:00
Christoph Egger
267ecec95f Removing dead MACH_OMAP_H4_OTG
MACH_OMAP_H4_OTG doesn't exist in Kconfig, therefore removing all
references for it from the source code.

Signed-off-by: Christoph Egger <siccegge@cs.fau.de>
Signed-off-by: Tony Lindgren <tony@atomide.com>
2010-07-05 17:03:59 +03:00
Christoph Egger
74b86b3d57 Removing dead APM
APM doesn't exist in Kconfig, therefore removing all references for it
from the source code.

Signed-off-by: Christoph Egger <siccegge@cs.fau.de>
Signed-off-by: Tony Lindgren <tony@atomide.com>
2010-07-05 17:03:59 +03:00
Christoph Egger
3c8ed2a90e Replacing LEDS_OMAP_DEBUG with OMAP_DEBUG_LEDS
LEDS_OMAP_DEBUG doesn't exist in Kconfig, therefore replacing all
references for it with OMAP_DEBUG_LEDS from the source code.

Signed-off-by: Christoph Egger <siccegge@cs.fau.de>
Signed-off-by: Tony Lindgren <tony@atomide.com>
2010-07-05 17:03:58 +03:00
Christoph Egger
df8d481df9 Removing dead OMAP_STI
OMAP_STI doesn't exist in Kconfig, therefore removing all
references for it from the source code.

Signed-off-by: Christoph Egger <siccegge@cs.fau.de>
Signed-off-by: Tony Lindgren <tony@atomide.com>
2010-07-05 17:03:58 +03:00
Christoph Egger
ab6f775190 Removing dead OMAP_DSP
OMAP_DSP doesn't exist in Kconfig, therefore removing all
references for it from the source code.

Signed-off-by: Christoph Egger <siccegge@cs.fau.de>
[tony@atomide.com: updated to apply on top of already queued patches]
Signed-off-by: Tony Lindgren <tony@atomide.com>
2010-07-05 16:31:54 +03:00
Christoph Egger
4705c1ca8b Removing dead OMAP_IR
OMAP_IR doesn't exist in Kconfig, therefore removing all references
for it from the source code.

Signed-off-by: Christoph Egger <siccegge@cs.fau.de>
[tony@atomide.com: updated for new mux code]
Signed-off-by: Tony Lindgren <tony@atomide.com>
2010-07-05 16:31:53 +03:00
Christoph Egger
312b80a1e5 Replace dead OMAP_MUX_ERRORS with OMAP_MUX_WARNINGS
OMAP_MUX_ERRORS doesn't exist in Kconfig, therefore replacing all
references for it with OMAP_MUX_WARNINGS in the source code.

Signed-off-by: Christoph Egger <siccegge@cs.fau.de>
Acked-by: Kirill A. Shutemov <kirill@shutemov.name>
Signed-off-by: Tony Lindgren <tony@atomide.com>
2010-07-05 16:31:53 +03:00
Tony Lindgren
8d9166b519 omap2/3/4: Add Kconfig option to compile in typical omap features
This produces a sane config that's suitable for using as the
base for most omap2/3/4 boards.

Signed-off-by: Tony Lindgren <tony@atomide.com>
2010-07-05 16:31:48 +03:00
Tony Lindgren
ffb63e3402 omap2/3/4: Select all omaps and boards by default
Select all omaps and boards by default

Signed-off-by: Tony Lindgren <tony@atomide.com>
2010-07-05 16:31:47 +03:00
Tony Lindgren
68ac8f7dda omap2/3/4: Move Kconfig options to mach-omap2/Kconfig
Move omap2/3/4 specific Kconfig options to mach-omap2/Kconfig

Signed-off-by: Tony Lindgren <tony@atomide.com>
2010-07-05 16:31:47 +03:00
Tony Lindgren
4a54db6124 omap: Make omap specific features appear under Kconfig menu
This will make Kconfig look nicer for selecting omap processor type

Signed-off-by: Tony Lindgren <tony@atomide.com>
2010-07-05 16:31:47 +03:00
Tony Lindgren
f0ca2c05dd omap: Use 32KiHZ timer by default
Use 32KiHZ timer by default as this is available on all omaps
except 15xx based systems.

Signed-off-by: Tony Lindgren <tony@atomide.com>
2010-07-05 16:31:46 +03:00
Tony Lindgren
fb78b51cb1 ARM: Disable VGA console for ARM in most cases
Otherwise we have to disable it manually to avoid compile errors.

Now it's only enabled only for the selected machines as suggested
by Anton Vorontsov <cbouatmailru@gmail.com>:

$ git grep VGA_CONSOLE= arch/arm/configs/
arch/arm/configs/footbridge_defconfig:CONFIG_VGA_CONSOLE=y
arch/arm/configs/integrator_defconfig:CONFIG_VGA_CONSOLE=y
arch/arm/configs/netwinder_defconfig:CONFIG_VGA_CONSOLE=y

Note that the Kconfig entry no longer needs separate entries
for ARCH_ACORN, ARCH_EBSA110 ARCH_VERSATILE.

Cc: linux-fbdev@vger.kernel.org
Signed-off-by: Tony Lindgren <tony@atomide.com>
2010-07-05 16:31:46 +03:00
Tony Lindgren
c9d8230e31 omap: mux: Remove old mux code
All mach-omap2 omaps should now use the new mux code.

Signed-off-by: Tony Lindgren <tony@atomide.com>
2010-07-05 16:31:40 +03:00
Tony Lindgren
f99bf16d70 omap: mux: Convert 2420 platform init code to use new mux code
Convert 2420 platform init code to use new mux code

Signed-off-by: Tony Lindgren <tony@atomide.com>
2010-07-05 16:31:40 +03:00
Tony Lindgren
58310acd3a omap: mux: Mux 2430 USB0HS_STP in board-2430.c
Use new mux functions for that. There are no other known 2430 boards
that need this mux.

Cc: Felipe Balbi <felipe.balbi@nokia.com>
Cc: David Brownell <dbrownell@users.sourceforge.net>
Signed-off-by: Tony Lindgren <tony@atomide.com>
2010-07-05 16:31:39 +03:00
Tony Lindgren
18dbe6c5dd omap: mux: Mux Apollon LCD power in board-apollon.c
Use the new mux function for that.

Cc: Kyungmin Park <kyungmin.park@samsung.com>
Cc: Tomi Valkeinen <tomi.valkeinen@nokia.com>
Signed-off-by: Tony Lindgren <tony@atomide.com>
2010-07-05 16:31:39 +03:00
Tony Lindgren
93c43f2561 omap: mux: Do keypad muxing in board-*.c files
This way we get pin muxing out of plat-omap and can convert H4 to use the
new mux functions.

Note that it should be safe to assume we can mux all the keypad pins
except on H4 which may have Menelaus connected.

Signed-off-by: Tony Lindgren <tony@atomide.com>
2010-07-05 16:31:39 +03:00
Tony Lindgren
0d600ff6fe omap: mux: Make omap2 FS USB code use new mux functions
Make omap2 FS USB code use new mux functions. Do not mux usb2_tllse0
as it has multiple options.

Cc: David Brownell <dbrownell@users.sourceforge.net>
Signed-off-by: Tony Lindgren <tony@atomide.com>
2010-07-05 16:31:38 +03:00
Tony Lindgren
369ed78fc9 omap: mux: Select POP package for 2430SDP
Select POP package for 2430SDP

Signed-off-by: Tony Lindgren <tony@atomide.com>
2010-07-05 16:31:38 +03:00
Tony Lindgren
bd8f0fc979 omap: mux: Select POP package for N8X0
Select POP package for N8X0

Signed-off-by: Tony Lindgren <tony@atomide.com>
2010-07-05 16:31:38 +03:00
Tony Lindgren
b52b14ef0d omap: mux: Select POP package for Apollon
Select POP package for Apollon

Cc: Kyungmin Park <kyungmin.park@samsung.com>
Signed-off-by: Tony Lindgren <tony@atomide.com>
2010-07-05 16:31:37 +03:00
Tony Lindgren
23275d459e omap: mux: Select SIP package for H4
Select SIP package for H4

Signed-off-by: Tony Lindgren <tony@atomide.com>
2010-07-05 16:31:37 +03:00
Tony Lindgren
89ba109229 omap: mux: Add data for 2430
Add data for 2430. Big thanks to Paul Walmsley <paul@pwsan.com>
for generating usable mux data out of TRMs.

Cc: Benoit Cousson <b-cousson@ti.com>
Signed-off-by: Paul Walmsley <paul@pwsan.com>
Signed-off-by: Tony Lindgren <tony@atomide.com>
2010-07-05 16:31:36 +03:00
Tony Lindgren
fc44046167 omap: mux: Add data for 2420
Add data for 2420. Big thanks to Paul Walmsley <paul@pwsan.com>
for generating usable mux data out of TRMs.

Cc: Benoit Cousson <b-cousson@ti.com>
Signed-off-by: Paul Walmsley <paul@pwsan.com>
Signed-off-by: Tony Lindgren <tony@atomide.com>
2010-07-05 16:31:36 +03:00
Tony Lindgren
ac1c94fb85 omap: mux: Remove unncessary parens from mux34xx.c
Remove unncessary parens from mux34xx.c

Signed-off-by: Tony Lindgren <tony@atomide.com>
2010-07-05 16:31:36 +03:00
Tony Lindgren
ac3dbeefb8 omap: mux: Allow compiling in new mux code on all mach-omap2 systems
Allow compiling in new mux code on all mach-omap2 systems

Signed-off-by: Tony Lindgren <tony@atomide.com>
2010-07-05 16:31:36 +03:00
Tony Lindgren
6dd8a6824a omap: mux: Renumber package defines to make room for older 24xx packages
Only POP and SIP are known to exist for 2420, 2430 seems to only have
SIP package available.

Signed-off-by: Tony Lindgren <tony@atomide.com>
2010-07-05 16:31:35 +03:00
Tony Lindgren
d5425be6eb omap: mux: Fix omap_mux_init_gpio for omap24xx
Looks like 24xx uses mode3 instead of mode4 for muxable GPIO pins.
This will be needed when 24xx mux code is converted to use the new
mux functions.

Signed-off-by: Tony Lindgren <tony@atomide.com>
2010-07-05 16:31:35 +03:00
Tony Lindgren
dd0cdd8882 omap: Move omap1 USB platform init code into mach-omap1/usb.c
Move omap1 FS USB platform init code into mach-omap1/usb.c

Signed-off-by: Tony Lindgren <tony@atomide.com>
2010-07-05 16:31:30 +03:00
Tony Lindgren
9809383930 omap: Enable interface clock for omap2 FS USB
Looks like this code was only working on boards that had
the usb_l4_ick enabled in the bootloader.

Signed-off-by: Tony Lindgren <tony@atomide.com>
2010-07-05 16:31:29 +03:00
Tony Lindgren
b5e8905bcd omap: Move omap2 FS USB platform init code into mach-omap2/usb-fs.c
Move omap2 FS USB platform init code into mach-omap2/usb-fs.c. This will
allow further work later on to use omap hwmod for initializing the
device.

Cc: David Brownell <dbrownell@users.sourceforge.net>
Signed-off-by: Tony Lindgren <tony@atomide.com>
2010-07-05 16:31:29 +03:00
Tony Lindgren
dba638d22d omap: Separate out omap2 FS USB platform init functions
We want to split old FS USB platform init code and stop doing pin multiplexing
under plat-omap. First move 24xx specific init code into omap2_usb[012]_init
functions.

Cc: David Brownell <dbrownell@users.sourceforge.net>
Signed-off-by: Tony Lindgren <tony@atomide.com>
2010-07-05 16:31:28 +03:00
Tony Lindgren
f40fd0e215 Merge branch 'v2.6.35-rc3-iommu-for-next' of git://gitorious.org/~doyu/lk/mainline into omap-for-linus 2010-07-02 11:23:30 +03:00
Linus Torvalds
9f2952dbcb Merge git://git.kernel.org/pub/scm/linux/kernel/git/gregkh/usb-2.6
* git://git.kernel.org/pub/scm/linux/kernel/git/gregkh/usb-2.6: (22 commits)
  USB: gadget: f_mass_storage: stale common->fsg value bug fix
  USB: gadget: f_mass_storage: fixed fs descriptors not being updated
  USB: musb: Enable the maximum supported burst mode for DMA
  USB: musb: fix Blackfin ulpi stubs
  USB: MUSB: make non-OMAP platforms build with CONFIG_PM=y
  USB: musb_core: make disconnect and suspend interrupts work again
  USB: obey the sysfs power/wakeup setting
  USB: gadget eth: Fix calculate CRC32 in EEM
  USB: qcserial: fix a memory leak in qcprobe error path
  USB: gadget/printer, fix sleep inside atomic
  USB: isp1362-hcd, fix double lock
  USB: serial: ftdi: correct merge conflict with CONTEC id
  USB: fix oops in usb_sg_init()
  USB: s3c2410: deactivate endpoints before gadget unbinding
  USB: ehci-mxc: bail out on transceiver problems
  USB: otg/ulpi: bail out on read errors
  usb: musb: Fix a bug by making suspend interrupt available in device mode
  USB: r8a66597: Fix failure in change of status
  USB: xHCI: Fix bug in link TRB activation change.
  USB: gadget: g_fs: possible invalid pointer reference bug fixed
  ...
2010-06-30 15:45:28 -07:00
Linus Torvalds
59e7648644 Merge git://git.kernel.org/pub/scm/linux/kernel/git/gregkh/tty-2.6
* git://git.kernel.org/pub/scm/linux/kernel/git/gregkh/tty-2.6:
  serial: cpm_uart: implement the cpm_uart_early_write() function for console poll
2010-06-30 15:45:06 -07:00
Linus Torvalds
c01ec7b1ea Merge branch 'omap-fixes-for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/tmlind/linux-omap-2.6
* 'omap-fixes-for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/tmlind/linux-omap-2.6:
  OMAP: hwmod: Fix the missing braces
  OMAP4: clock: Fix multi-omap boot with reset un-used clocks
  OMAP3: PM: fix IO daisy chain enable to use PM_WKEN reg
  omap: GPIO: fix auto-disable of debounce clock
  omap: DMTIMER: Ack pending interrupt always when stopping a timer
  omap: Stalker board: switch over to gpio_set_debounce
  omap: fix build failure due to missing include dma-mapping.h
  omap iommu: Fix Memory leak
2010-06-30 15:44:21 -07:00
Jes Sorensen
5e9772b95b Add mdr as maintainer of qla1280 driver.
As discussed with Mike Reed, add him as the maintainer of the qla1280
driver as I no longer have any hardware and he is actively looking
after it.

Signed-off-by: Jes Sorensen <Jes.Sorensen@redhat.com>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2010-06-30 15:43:44 -07:00
Michal Hocko
7a0ea09ad5 futex: futex_find_get_task remove credentails check
futex_find_get_task is currently used (through lookup_pi_state) from two
contexts, futex_requeue and futex_lock_pi_atomic.  None of the paths
looks it needs the credentials check, though.  Different (e)uids
shouldn't matter at all because the only thing that is important for
shared futex is the accessibility of the shared memory.

The credentail check results in glibc assert failure or process hang (if
glibc is compiled without assert support) for shared robust pthread
mutex with priority inheritance if a process tries to lock already held
lock owned by a process with a different euid:

pthread_mutex_lock.c:312: __pthread_mutex_lock_full: Assertion `(-(e)) != 3 || !robust' failed.

The problem is that futex_lock_pi_atomic which is called when we try to
lock already held lock checks the current holder (tid is stored in the
futex value) to get the PI state.  It uses lookup_pi_state which in turn
gets task struct from futex_find_get_task.  ESRCH is returned either
when the task is not found or if credentials check fails.

futex_lock_pi_atomic simply returns if it gets ESRCH.  glibc code,
however, doesn't expect that robust lock returns with ESRCH because it
should get either success or owner died.

Signed-off-by: Michal Hocko <mhocko@suse.cz>
Acked-by: Darren Hart <dvhltc@us.ibm.com>
Cc: Ingo Molnar <mingo@elte.hu>
Cc: Thomas Gleixner <tglx@linutronix.de>
Cc: Nick Piggin <npiggin@suse.de>
Cc: Alexey Kuznetsov <kuznet@ms2.inr.ac.ru>
Cc: Peter Zijlstra <peterz@infradead.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2010-06-30 15:43:44 -07:00
Michal Nazarewicz
b894f60a23 USB: gadget: f_mass_storage: stale common->fsg value bug fix
On fsg_unbind the common->fsg pointer was not NULLed if the
unbound fsg_dev instance was the current one.  As an effect,
the incorrect pointer was preserved in all further operations
which caused do_set_interface to reference an invalid region.

This commit fixes this by raising an exception in fsg_bind
which will change the common->fsg pointer.  This also requires
an wait queue so that the thread in fsg_bind can wait till the
worker thread handles the exception.

This commit removes also a config and new_config fields of
fsg_common as they are no longer needed since fsg can be
used to determine whether function is active or not.

Moreover, this commit removes possible race condition where
the fsg field was modified in both the worker thread and
form various other contexts.  This is fixed by replacing
prev_fsg with new_fsg.  At this point, fsg is assigned only
in worker thread.

Signed-off-by: Michal Nazarewicz <m.nazarewicz@samsung.com>
Cc: Kyungmin Park <kyungmin.park@samsung.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
2010-06-30 08:16:07 -07:00
Michal Nazarewicz
e5fd39d9b8 USB: gadget: f_mass_storage: fixed fs descriptors not being updated
The full speed descriptors were copied to the usb_function structure
in the fsg_bind_config function before call to the usb_ep_autoconfig.
The usb_ep_autoconfig was called in fsg_bind using the original
descriptors.  In effect copied descriptors were not updated.

This patch changes the copy full speed descriptors after the call to
usb_op_autoconfig is performed.  This way, copied full speed
descriptors have updated values.

Signed-off-by: Michal Nazarewicz <m.nazarewicz@samsung.com>
Cc: Kyungmin Park <kyungmin.park@samsung.com>
Reported-by: Dries Van Puymbroeck <Dries.VanPuymbroeck@dekimo.com>
Tested-by: Dries Van Puymbroeck <Dries.VanPuymbroeck@dekimo.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
2010-06-30 08:16:07 -07:00
Hema HK
c0f1f8e38f USB: musb: Enable the maximum supported burst mode for DMA
Setting MUSB Burst Mode 3 automatically enables support for
lower burst modes (BURST4, BURST8, BURST16 or bursts of unspecified
length). There is no need to set these burst modes based on the
packet size. Also enable the burst mode for both mode1 and mode0.

This is a fix for buggy hardware - having the lower burst modes
enabled can potentially cause lockups of the DMA engine used in
OMAP2/3/4 chips.

Signed-off-by: Hema HK <hemahk@ti.com>
Signed-off-by: Anand Gadiyar <gadiyar@ti.com>
Signed-off-by: Ajay Kumar Gupta <ajay.gupta@ti.com>
Acked-by: Felipe Balbi <felipe.balbi@nokia.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
2010-06-30 08:16:07 -07:00
Mike Frysinger
f2263db74a USB: musb: fix Blackfin ulpi stubs
The new ulpi code defines fallback stubs for the Blackfin arch, but does
so incorrectly leading to a build failure:
drivers/usb/musb/musb_core.c:227: error: 'musb_ulpi_read' undeclared here (not in a function)
drivers/usb/musb/musb_core.c:228: error: 'musb_ulpi_write' undeclared here (not in a function)

Tweak the fallback stubs so that they do work as intended.

Signed-off-by: Mike Frysinger <vapier@gentoo.org>
Signed-off-by: Ajay Kumar Gupta <ajay.gupta@ti.com>
Acked-by: Felipe Balbi <felipe.balbi@nokia.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
2010-06-30 08:16:07 -07:00
Sergei Shtylyov
9297688a92 USB: MUSB: make non-OMAP platforms build with CONFIG_PM=y
Attempt to build MUSB driver with CONFIG_PM=y (e.g. in the OTG mode) on DaVinci
results in these link errors:

drivers/built-in.o: In function `musb_restore_context':
led-triggers.c:(.text+0x714d8): undefined reference to
`musb_platform_restore_context'
drivers/built-in.o: In function `musb_save_context':
led-triggers.c:(.text+0x71788): undefined reference to
`musb_platform_save_context'

This turned out to be caused by commit 9957dd97ec
(usb: musb: Fix compile error for omaps for musb_hdrc). Revert it, taking into
account the rename of CONFIG_ARCH_OMAP34XX into CONFIG_ARCH_OMAP3 (which that
commit fixed in a completely inappropriate way) and the recent addition of
OMAP4 support.

Signed-off-by: Sergei Shtylyov <sshtylyov@ru.mvista.com>
Signed-off-by: Ajay Kumar Gupta <ajay.gupta@ti.com>
Acked-by: Felipe Balbi <felipe.balbi@nokia.com>
Cc: stable <stable@kernel.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
2010-06-30 08:16:07 -07:00
Sergei Shtylyov
7d9645fdca USB: musb_core: make disconnect and suspend interrupts work again
Commit 1c25fda4a0 (usb: musb: handle irqs in the
order dictated by programming guide) forgot to get rid of the old 'STAGE0_MASK'
filter for calling musb_stage0_irq(), so now disconnect and suspend interrupts
are effectively ignored...

Signed-off-by: Sergei Shtylyov <sshtylyov@ru.mvista.com>
Cc: stable <stable@kernel.org>
Signed-off-by: Ajay Kumar Gupta <ajay.gupta@ti.com>
Acked-by: Felipe Balbi <felipe.balbi@nokia.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
2010-06-30 08:16:06 -07:00