The cordic function which calculates cosine and sine values for given
angle is now provided in library module. The phy code now uses this
module function.
Reviewed-by: Henry Ptasinski <henryp@broadcom.com>
Reviewed-by: Roland Vossen <rvossen@broadcom.com>
Reviewed-by: Pieter-Paul Giesberts <pieterpg@broadcom.com>
Signed-off-by: Arend van Spriel <arend@broadcom.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
The crc8 function is now available as a library function provided
by kernel module crc8.ko. The function has been removed from brcmutil
module and srom.c now uses crc8 library function.
Reviewed-by: Henry Ptasinski <henryp@broadcom.com>
Reviewed-by: Roland Vossen <rvossen@broadcom.com>
Reviewed-by: Pieter-Paul Giesberts <pieterpg@broadcom.com>
Signed-off-by: Arend van Spriel <arend@broadcom.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
brcmsmac doesn't yet use bcma, but both drivers attempt to claim the same
device. For now, turn of brcmsmac if bcma is enabled.
Signed-off-by: Arend van Spriel <arend@broadcom.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
Certain Mips based, big endian Broadcom products contain a memory window
for endianness swap purposes. However, this is too system specific for
this driver as there are more big endian platforms to support. Thus, this
'window' functionality is not to be used and can be removed.
The swap window would be a performance improvement and could be provided
with a dedicated mapping function in the platform specific code.
Tested on BCM63281.
Reviewed-by: Henry Ptasinski <henryp@broadcom.com>
Reviewed-by: Arend van Spriel <arend@broadcom.com>
Tested-by: Jonas Gorski <jonas.gorski@gmail.com>
Signed-off-by: Arend van Spriel <arend@broadcom.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
The inline function dma_spin_for_len() was defined for MIPS platforms
but the problem only occurs with dma of the PCI core in bcm47xx chips.
This patch restricts the function further to BCM47XX platforms only.
Tested on BCM63281.
Reviewed-by: Pieter-Paul Giesberts <pieterpg@broadcom.com>
Reviewed-by: Henry Ptasinski <henryp@broadcom.com>
Reviewed-by: Roland Vossen <rvossen@broadcom.com>
Tested-by: Jonas Gorski <jonas.gorski@gmail.com>
Signed-off-by: Arend van Spriel <arend@broadcom.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
The driver contained conditional code for resolving issue with
dma transaction reordering. This code was conditionalized using
__mips__ macro, but it actually is specific to bcm47xx chips.
This patch replaces it for the more speficic CONFIG_BCM47XX macro.
Tested on BCM63281.
Reviewed-by: Henry Ptasinski <henryp@broadcom.com>
Reviewed-by: Roland Vossen <rvossen@broadcom.com>
Tested-by: Jonas Gorski <jonas.gorski@gmail.com>
Signed-off-by: Arend van Spriel <arend@broadcom.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
The include <asm/addrspace.h> has been removed as it is not
needed. None of the definitions from it are used in the source
file.
Tested on BCM63281.
Reviewed-by: Henry Ptasinski <henryp@broadcom.com>
Reviewed-by: Pieter-Paul Giesberts <pieterpg@broadcom.com>
Tested-by: Jonas Gorski <jonas.gorski@gmail.com>
Signed-off-by: Arend van Spriel <arend@broadcom.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
The firmware files are encoded as little-endian. Do the appropriate swapping
for big-endian platforms.
Tested on Mac G5 PPC and BCM63281.
Signed-off-by: Henry Ptasinski <henryp@broadcom.com>
Reviewed-by: Arend van Spriel <arend@broadcom.com>
Reviewed-by: Roland Vossen <rvossen@broadcom.com>
Tested-by: Jonas Gorski <jonas.gorski@gmail.com>
Signed-off-by: Arend van Spriel <arend@broadcom.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
Swapping the addresses is unnecessary, since the swaps are handled by the
underlying platform code (i.e. readb() etc. handle any necessary swapping).
Tested on Mac G5 PPC and BCM63281.
Signed-off-by: Henry Ptasinski <henryp@broadcom.com>
Reviewed-by: Arend van Spriel <arend@broadcom.com>
Tested-by: Jonas Gorski <jonas.gorski@gmail.com>
Signed-off-by: Arend van Spriel <arend@broadcom.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
The original implementation iterated over the data in buf+1 through buf+size,
whereas it should have been over the data in buf through buf+size-1.
Tested on Mac G5 PPC and BCM63281.
Signed-off-by: Henry Ptasinski <henryp@broadcom.com>
Reviewed-by: Arend van Spriel <arend@broadcom.com>
Reviewed-by: Roland Vossen <rvossen@broadcom.com>
Tested-by: Jonas Gorski <jonas.gorski@gmail.com>
Signed-off-by: Arend van Spriel <arend@broadcom.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
The macro BUS_SWAP32(a) expanded to (a) which was fine for a little
endian system. For big endian platform this should do as the name
implies. As the driver is intended for PCI which is little-endian
the macro cpu_to_le32() can be used instead.
Reviewed-by: Pieter-Paul Giesberts <pieterpg@broadcom.com>
Reviewed-by: Henry Ptasinski <henryp@broadcom.com>
Reviewed-by: Roland Vossen <rvossen@broadcom.com>
Signed-off-by: Arend van Spriel <arend@broadcom.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
Four macros with PHYSADDR name prefix are not doing a lot and
complicate code readability. These have been expanded in the source
code and consequently removed the definitions.
Reviewed-by: Pieter-Paul Giesberts <pieterpg@broadcom.com>
Reviewed-by: Henry Ptasinski <henryp@broadcom.com>
Reviewed-by: Roland Vossen <rvossen@broadcom.com>
Signed-off-by: Arend van Spriel <arend@broadcom.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
The macros W_SM and R_SM are not doing much conversion of the macro
parameters and complicate code readability without good cause. It
is more clear to remove usage of the macros expanding it in the source
code.
Reviewed-by: Pieter-Paul Giesberts <pieterpg@broadcom.com>
Reviewed-by: Henry Ptasinski <henryp@broadcom.com>
Reviewed-by: Roland Vossen <rvossen@broadcom.com>
Signed-off-by: Arend van Spriel <arend@broadcom.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
Use brcmf_sdioh_request_byte directly instead of calling
brcmf_sdioh_cfg_read and brcmf_sdioh_cfg_write in brcmfmac
Reviewed-by: Arend van Spriel <arend@broadcom.com>
Reviewed-by: Roland Vossen <rvossen@broadcom.com>
Signed-off-by: Arend van Spriel <arend@broadcom.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
wext support code have been removed a while ago. This patch removes the
traces left behind.
Reviewed-by: Arend van Spriel <arend@broadcom.com>
Signed-off-by: Arend van Spriel <arend@broadcom.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
Use sdio function pointer stored in struct brcmf_sdio_dev instead
of those in gInstance.
Reviewed-by: Arend van Spriel <arend@broadcom.com>
Signed-off-by: Arend van Spriel <arend@broadcom.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
Use brcmf_sdio_dev as the unified structure to store information
of device.
Reviewed-by: Arend van Spriel <arend@broadcom.com>
Signed-off-by: Arend van Spriel <arend@broadcom.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
Iovar IOV_BLOCKSIZE code is not actually setting the sdio
function's block size. Use cur_blksize provided by mmc core where
necessary.
Reviewed-by: Arend van Spriel <arend@broadcom.com>
Signed-off-by: Arend van Spriel <arend@broadcom.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
In wl_cfg80211.c two semaphores were used to trigger a task to process
an event. The wait queues are better suited for that purpose. This also
removes checkpatch warning on sema_init() calls in this source file.
Reviewed-by: Roland Vossen <rvossen@broadcom.com>
Reviewed-by: Franky Lin <frankyl@broadcom.com>
Signed-off-by: Arend van Spriel <arend@broadcom.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
The only remaining TODO item has been tackled so it was removed. No
other TODO items left.
Reviewed-by: Roland Vossen <rvossen@broadcom.com>
Reviewed-by: Pieter-Paul Giesberts <pieterpg@broadcom.com>
Signed-off-by: Arend van Spriel <arend@broadcom.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
Several issue have been reported building the driver on big endian
systems. Following commits were done on driver Kconfig:
d462039 Staging: brcm80211: disable drivers except for X86 or MIPS platforms
15e5201 Staging: brcm80211: disable drivers for PPC platforms
These problems have been resolved so the added 'depends' lines in
the Kconfig have been removed.
Compile tested it for following architectures:
little endian
x86
x86_64
arm
mips
big endian
ppc64
sparc64
mips
Reported-by: David S. Miller <davem@davemloft.net>
Reported-by: Stephen Rothwell <sfr@canb.auug.org.au>
Reported-by: Greg Kroah-Hartman <gregkh@suse.de>
Reviewed-by: Roland Vossen <rvossen@broadcom.com>
Reviewed-by: Pieter-Paul Giesberts <pieterpg@broadcom.com>
Signed-off-by: Arend van Spriel <arend@broadcom.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
Building for the ARM resulted in a compiler warning about usage of
a possibly uninitialized variable. The warning is valid and the
code has been fixed accordingly.
Reviewed-by: Pieter-Paul Giesberts <pieterpg@broadcom.com>
Reviewed-by: Henry Ptasinski <henryp@broadcom.com>
Signed-off-by: Arend van Spriel <arend@broadcom.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
Code cleanup. Watchdog function served no purpose since it had an empty body.
Reviewed-by: Pieter-Paul Giesberts <pieterpg@broadcom.com>
Signed-off-by: Arend van Spriel <arend@broadcom.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
The AMPDU module was never registered, so it does not have to be unregistered.
Reviewed-by: Pieter-Paul Giesberts <pieterpg@broadcom.com>
Signed-off-by: Arend van Spriel <arend@broadcom.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
Code cleanup. Since the softmac driver only supports a PCI(e) bus, the void *
could be replaced with a less generic type.
Reviewed-by: Pieter-Paul Giesberts <pieterpg@broadcom.com>
Signed-off-by: Arend van Spriel <arend@broadcom.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
Code cleanup. For the softmac, the 'bustype' in use is always PCI_BUS. Hence
code related to dealing with different bus types (eg: PCI_BUS, JTAG_BUS,
SI_BUS) could be removed.
Reviewed-by: Pieter-Paul Giesberts <pieterpg@broadcom.com>
Signed-off-by: Arend van Spriel <arend@broadcom.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
One checkpatch warning was remaining in the brcmsmac driver. The
code has been restructured to get rid of this last checkpatch
warning.
Reviewed-by: Roland Vossen <rvossen@broadcom.com>
Reviewed-by: Pieter-Paul Giesberts <pieterpg@broadcom.com>
Signed-off-by: Arend van Spriel <arend@broadcom.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
The use of function pointer of bus interrupt isr is no longer needed
in fullmac as there is only one available isr.
Reviewed-by: Roland Vossen <rvossen@broadcom.com>
Signed-off-by: Arend van Spriel <arend@broadcom.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
In fullmac, brcmf_sdcard_intr_enable/disable is a legacy layer and
doesn't really enable/disable any interrupt. This patch removes the
corresponding code.
Reviewed-by: Roland Vossen <rvossen@broadcom.com>
Signed-off-by: Arend van Spriel <arend@broadcom.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
brcmf_sdcrad_cfg_read_word and brcmf_sdcard_cfg_write_word are
not used by anyone.
Reviewed-by: Roland Vossen <rvossen@broadcom.com>
Signed-off-by: Arend van Spriel <arend@broadcom.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
Use brcmf_sdio_dev as the unified structure to store information
of wifi dongle
Reviewed-by: Roland Vossen <rvossen@broadcom.com>
Signed-off-by: Arend van Spriel <arend@broadcom.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
mmc core is handling the vendor/device id check and matching drivers
with devices. No need to do it again in driver.
Reviewed-by: Roland Vossen <rvossen@broadcom.com>
Signed-off-by: Arend van Spriel <arend@broadcom.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
brcmf_sdioh_driver is a legacy bus driver interface we dont need
any more.
Reviewed-by: Roland Vossen <rvossen@broadcom.com>
Signed-off-by: Arend van Spriel <arend@broadcom.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
One of the steps to remove global variable. gInstance will be
replaced by brcmf_sdio_dev in the upcoming patch.
Reviewed-by: Roland Vossen <rvossen@broadcom.com>
Signed-off-by: Arend van Spriel <arend@broadcom.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
