Include: a fix for a recently introduced change: obviously max_t should
be used instead of min_t here. Also, a likely should apply to the result
of the comparison, not the variable per se.
Signed-off-by: Yannick Brosseau <yannick.brosseau@gmail.com>
Signed-off-by: Mathieu Desnoyers <mathieu.desnoyers@efficios.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
TILER/DMM provides two features for omapdrm GEM objects:
1) providing a physically contiguous view to discontiguous memory
for hw initiators that cannot otherwise support discontiguous
buffers (DSS scanout, IVAHD video decode/encode, etc)
2) providing untiling for 2d tiled buffers, which are used in some
cases to provide rotation and reduce memory bandwidth for hw
initiators that tend to access data in 2d block patterns.
For 2d tiled buffers, there are some additional complications when
it comes to userspace mmap'ings. For non-tiled buffers, the original
(potentially physically discontiguous) pages are used to back the
mmap. For tiled buffers, we need to mmap via the tiler/dmm region to
provide an unswizzled view of the buffer. But (a) the buffer is not
necessarily pinned in TILER all the time (it can be unmapped when
there is no DMA access to the buffer), and (b) when they are they
are pinned, they not necessarily page aligned from the perspective of
the CPU. And non-page aligned userspace buffer mapping is evil.
To solve this, we reserve one or more small regions in each of the 2d
containers when the driver is loaded to use as a "user-GART" where we
can create a second page-aligned mapping of parts of the buffer being
accessed from userspace. Page faulting is used to evict and remap
different regions of whichever buffers are being accessed from user-
space.
Signed-off-by: Rob Clark <rob@ti.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
Dynamic Memory Manager (DMM) is a hardware block in the OMAP4+
processor that contains at least one TILER instance. TILER, or
Tiling and Isometric Lightweight Engine for Rotation, provides
IOMMU capabilities through the use of a physical address translation
table. The TILER also provides zero cost rotation and mirroring.
The TILER provides both 1D and 2D access by providing different views
or address ranges that can be used to access the physical memory that
has been mapped in through the PAT. Access to the 1D view results in
linear access to the underlying memory. Access to the 2D views result
in tiled access to the underlying memory resulted in increased
efficiency.
The TILER address space is managed by a tiler container manager (TCM)
and allocates the address space through the use of the Simple Tiler
Allocation algorithm (SiTA). The purpose of the algorithm is to keep
fragmentation of the address space as low as possible.
Signed-off-by: Andy Gross <andy.gross@ti.com>
Signed-off-by: Rob Clark <rob@ti.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
In commit 834d0ee317 (uintxy_t removal) not all changes were trival text replacements, some converted u64 -> dma_addr_t.
In some configurations dma_addr_t is a u32, meaning that some bit operations cause build warnings. From Randy Dunlap:
----------------
on i386 (X86_32) builds:
drivers/staging/et131x/et131x.c:2483:8: warning: right shift count >= width of type
drivers/staging/et131x/et131x.c:2531:8: warning: right shift count >= width of type
----------------
Removed these by reverting dma_addr_t back to u64 types, as well as
reverting some other non-trivial changes from the aforementioned commit.
Reported-by: Randy Dunlap <rdunlap@xenotime.net>
Signed-off-by: Mark Einon <mark.einon@gmail.com>
Acked-by: Randy Dunlap <rdunlap@xenotime.net>
Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
As Dan mentioned, dcon_write() will only write u16 values. The
appropriate parts have been changed. As a result of module_param()
not accepting u16 as a valid data type, ushort is used.
Signed-off-by: Valentin Rothberg <valentinrothberg@googlemail.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
As noted by the checkpatch script, strict_strtoul is obsolete. Unsigned
longs are used, so it seems good to take kstrtoul.
Signed-off-by: Valentin Rothberg <valentinrothberg@googlemail.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
The following changes were made in the document:
1. Update URLs to working links
2. remove old information about module parameters
3. Add IOCTL information.
4. cleanups and fix spelling
5. driver changed from character device to misc character device
Signed-off-by: Oren Weil <oren.jer.weil@intel.com>
Signed-off-by: Tomas Winkler <tomas.winkler@intel.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
The irq handler processes queued mei clients connect requests, which were
not transferred to the device in ioctl context due to unavailability
of the write buffer.
The handler may transfer the connection request only if there is
no other ongoing requests for the same mei id.
This condition was implemented inversely which depending on
the write buffer availability lead to seemingly random
failures during connection attempts.
Cc: Oren Weil <oren.jer.weil@intel.com>
Signed-off-by: Natalia Ovsyanikov <natalia.ovsyanikov@intel.com>
Signed-off-by: Tomas Winkler <tomas.winkler@intel.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
list_for_each_entry_safe(pos, next, &head, list)
if (pos) {
....
}
This check isn't needed. The list cursor in a list_for_each()
loop is always a valid pointer
Cc: Oren Weil <oren.jer.weil@intel.com>
Reported-by: Dan Carpenter <dan.carpenter@oracle.com>
Signed-off-by: Tomas Winkler <tomas.winkler@intel.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
Change ->read_status() by separating the error handling and the
status bits. This also fixes a signedness bug in dcon_interrupt()
that would break the error handling.
Signed-off-by: Xi Wang <xi.wang@gmail.com>
Acked-by: Andres Salomon <dilinger@queued.net>
Cc: Dan Carpenter <dan.carpenter@oracle.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
The allocation of zram->compress_buffer is misssing a GFP_* specifier.
This is equivalent to GFP_NOWAIT but it is more likely a omission.
Since the allocation just above it uses GFP_KERNEL, there is no reason
to use GFP_NOWAIT here. Therefore, add GFP_KERNEL.
Signed-off-by: Jerome Marchand <jmarchan@redhat.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
As reported by checkpatch.pl strict_strtoX is obsolet and should be
replaced by kstrtoX.
Signed-off-by: Sergey Datsevich <srgdts@gmail.com>
Signed-off-by: Bjoern Meier <bjoernmeier@hotmail.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
Set the length field of the scatter gather elements correctly when we create
the bounce buffer. When we use the bounce buffer for a "write" operation,
the act of copying to the bounce buffer, correctly deals with this issue.
However, on the "read" side, the current code was not correctly setting
the buffer length. Fix this bug. Note that when we copy from the bounce
buffer (for the read case), the amount we copy is controlled by the original
scatter gather list given to the driver.
Signed-off-by: K. Y. Srinivasan <kys@microsoft.com>
Signed-off-by: Haiyang Zhang <haiyangz@microsoft.com>
Reported-by: Dadok Milan <dadok@kvados.cz>
Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
In this clean up patch, I altered functions: copy_to/
from_user() to return -EFAULT when an error occurs.
I also replaced break statements when an error occurs
from copy_to/from_user() with direct returns of -EFAULT.
Signed-off-by: Kevin McKinney <klmckinney1@gmail.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
This is a clean up patch for IOCTL_BCM_NVM_WRITE
that replaces the assignment of the Status
variable with direct returns of the error code,
replaces the break statements with direct returns,
and removes a white space.
Signed-off-by: Kevin McKinney <klmckinney1@gmail.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
This patch fixes a memory error in ioctl,
IOCTL_BCM_NVM_WRITE. While copying data to
user space, if an error occurs, pReadData
is freed. Then, at the end of the ioctl,
pReadData was being freed again.
Signed-off-by: Kevin McKinney <klmckinney1@gmail.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
This patch refactors the device information code and adds preliminary support for the POD HD 500 device.
Signed-off-by: Markus Grabner <grabner@icg.tugraz.at>
Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
This patch removes experimental code which is no longer used.
Signed-off-by: Markus Grabner <grabner@icg.tugraz.at>
Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
The obsolete function strict_strtoul should be replaced by the kstrto*
functions.
In this context kstrtou16 should be use, as midi_mask_receive is only
used as unsigned short. All corresponding datatypes were adapted
accordingly.
Signed-off-by: Andor Daam <andor.daam@googlemail.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
The function strict_strtoul is obsolete and should be replaced by the
new kstrto* functions.
The variable midi_mask_transmit is only used as unsigned short and the
datatypes of all affected variables were adjusted accordingly.
Signed-off-by: Andor Daam <andor.daam@googlemail.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
We should release the udev->sem lock before returning.
Signed-off-by: Dan Carpenter <dan.carpenter@oracle.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
If we had an invalid trignum (anything other than zero is invalid) then
we returned without unlocking. I've modified this function to just have
one return point.
Signed-off-by: Dan Carpenter <dan.carpenter@oracle.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
Make "forcecrt2type" to apply also for XG21. The patch enables user to
switch LVDS LCD ON/OFF without the need to update the video BIOS.
Signed-off-by: Aaro Koskinen <aaro.koskinen@iki.fi>
Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
Delete XGI21_LCDCapList. This data is display specific and does not
belong to the driver. It should be provided by the video BIOS.
Signed-off-by: Aaro Koskinen <aaro.koskinen@iki.fi>
Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
Move the LVDS data into a device-specific data, and eliminate the global
variable usage.
Signed-off-by: Aaro Koskinen <aaro.koskinen@iki.fi>
Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
XG27 has the second display output already hardcoded to disabled. Just
in case, ensure that it has the LVDS code paths disabled. This will
simplify the future cleanups.
Signed-off-by: Aaro Koskinen <aaro.koskinen@iki.fi>
Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
Delete XGIfb_GetXG21LVDSData() and code which duplicates
xgifb_read_vbios().
Signed-off-by: Aaro Koskinen <aaro.koskinen@iki.fi>
Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
Only a single LVDS table entry is needed by the driver.
Signed-off-by: Aaro Koskinen <aaro.koskinen@iki.fi>
Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
Check the BIOS size to avoid out of bounds array access. Disable LVDS
in case errors are detected.
Signed-off-by: Aaro Koskinen <aaro.koskinen@iki.fi>
Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
We need the video BIOS only on XG21 and only during the init, so let's
do everything at the same place.
Signed-off-by: Aaro Koskinen <aaro.koskinen@iki.fi>
Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
Remove video BIOS access from the routine, use the flag instead which
is initialized according to the BIOS data.
Signed-off-by: Aaro Koskinen <aaro.koskinen@iki.fi>
Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
Use a pointer variable to make some lines shorter and more readable.
Signed-off-by: Aaro Koskinen <aaro.koskinen@iki.fi>
Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
Rename pVideoMemory to vbios, and also remove volatile at the same go.
Signed-off-by: Aaro Koskinen <aaro.koskinen@iki.fi>
Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
If the count (j) is 0xff, just do the loop once.
Signed-off-by: Aaro Koskinen <aaro.koskinen@iki.fi>
Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
When updating the scan mask we have to check the actual scan mask for if the
channel is already enabled, not the matching scan mask from the available
scan masks. The bit will already be set there and as a result the actual
scan mask will not get updated and the channel stays disabled.
Also fix the return value of iio_scan_el_store which would return 1 instead of
the number of bytes written if the channel was already active in the scan mask.
Acked-by: Jonathan Cameron <jic23@kernel.org>
Signed-off-by: Lars-Peter Clausen <lars@metafoo.de>
Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
