Commit Graph

170333 Commits

Author SHA1 Message Date
Ben Hutchings
734a350a6c sfc: Remove unused constant
Signed-off-by: Ben Hutchings <bhutchings@solarflare.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
2009-11-26 15:59:11 -08:00
Ben Hutchings
8986352a32 sfc: Comment corrections
Signed-off-by: Ben Hutchings <bhutchings@solarflare.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
2009-11-26 15:59:07 -08:00
Ben Hutchings
332c1ce9e7 sfc: Strengthen EFX_ASSERT_RESET_SERIALISED
Signed-off-by: Ben Hutchings <bhutchings@solarflare.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
2009-11-26 15:59:04 -08:00
Ben Hutchings
80cb9a0f7f sfc: Treat all MAC registers as 128-bit
Although all the defined fields in these registers are within 32 bits,
they are architecturally defined as 128-bit like most other Falcon
registers.  In particular, we must use efx_reado() to ensure proper
locking when reading MD_STAT_REG.

Signed-off-by: Ben Hutchings <bhutchings@solarflare.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
2009-11-26 15:59:00 -08:00
Ben Hutchings
46e1ac0f42 sfc: Fix descriptor cache sizes
These were accidentally undersized by a factor of 2, which limited
performance.

Signed-off-by: Ben Hutchings <bhutchings@solarflare.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
2009-11-26 15:58:57 -08:00
Arnd Bergmann
27c0b1a850 macvlan: export macvlan mode through netlink
In order to support all three modes of macvlan at
runtime, extend the existing netlink protocol
to allow choosing the mode per macvlan slave
interface.

This depends on a matching patch to iproute2
in order to become accessible in user land.

Signed-off-by: Arnd Bergmann <arnd@arndb.de>
Acked-by: Patrick McHardy <kaber@trash.net>
Signed-off-by: David S. Miller <davem@davemloft.net>
2009-11-26 15:53:10 -08:00
Arnd Bergmann
618e1b7482 macvlan: implement bridge, VEPA and private mode
This allows each macvlan slave device to be in one
of three modes, depending on the use case:

MACVLAN_PRIVATE:
  The device never communicates with any other device
  on the same upper_dev. This even includes frames
  coming back from a reflective relay, where supported
  by the adjacent bridge.

MACVLAN_VEPA:
  The new Virtual Ethernet Port Aggregator (VEPA) mode,
  we assume that the adjacent bridge returns all frames
  where both source and destination are local to the
  macvlan port, i.e. the bridge is set up as a reflective
  relay.
  Broadcast frames coming in from the upper_dev get
  flooded to all macvlan interfaces in VEPA mode.
  We never deliver any frames locally.

MACVLAN_BRIDGE:
  We provide the behavior of a simple bridge between
  different macvlan interfaces on the same port. Frames
  from one interface to another one get delivered directly
  and are not sent out externally. Broadcast frames get
  flooded to all other bridge ports and to the external
  interface, but when they come back from a reflective
  relay, we don't deliver them again.
  Since we know all the MAC addresses, the macvlan bridge
  mode does not require learning or STP like the bridge
  module does.

Based on an earlier patch "macvlan: Reflect macvlan packets
meant for other macvlan devices" by Eric Biederman.

Signed-off-by: Arnd Bergmann <arnd@arndb.de>
Acked-by: Patrick McHardy <kaber@trash.net>
Cc: Eric Biederman <ebiederm@xmission.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
2009-11-26 15:53:07 -08:00
Arnd Bergmann
a1e514c5d0 macvlan: cleanup rx statistics
We have very similar code for rx statistics in
two places in the macvlan driver, with a third
one being added in the next patch.

Consolidate them into one function to improve
overall readability of the driver.

Signed-off-by: Arnd Bergmann <arnd@arndb.de>
Acked-by: Patrick McHardy <kaber@trash.net>
Signed-off-by: David S. Miller <davem@davemloft.net>
2009-11-26 15:53:02 -08:00
Arnd Bergmann
445409602c veth: move loopback logic to common location
The veth driver contains code to forward an skb
from the start_xmit function of one network
device into the receive path of another device.

Moving that code into a common location lets us
reuse the code for direct forwarding of data
between macvlan ports, and possibly in other
drivers.

Signed-off-by: Arnd Bergmann <arnd@arndb.de>
Acked-by: Patrick McHardy <kaber@trash.net>
Signed-off-by: David S. Miller <davem@davemloft.net>
2009-11-26 15:52:58 -08:00
Simon Kagstrom
1bda8aa86b via-velocity: Bump version
Signed-off-by: Simon Kagstrom <simon.kagstrom@netinsight.net>
Signed-off-by: David S. Miller <davem@davemloft.net>
2009-11-26 15:51:29 -08:00
Simon Kagstrom
b06f78f4d0 via-velocity: Set tx checksum from ethtool instead of module parameter
Defaults to on (as before).

Signed-off-by: Simon Kagstrom <simon.kagstrom@netinsight.net>
Signed-off-by: David S. Miller <davem@davemloft.net>
2009-11-26 15:51:25 -08:00
Simon Kagstrom
c79992fdde via-velocity: Re-enable transmit scatter-gather support
The velocity hardware can handle up to 7 memory segments. This can be
turned on and off via ethtool. The support was removed in commit

  83c98a8cd0

but is re-enabled and cleaned up here. It's off by default.

Signed-off-by: Simon Kagstrom <simon.kagstrom@netinsight.net>
Signed-off-by: David S. Miller <davem@davemloft.net>
2009-11-26 15:51:22 -08:00
Simon Kagstrom
2a5774f7d8 via-velocity: Change DMA_LENGTH_DEF (from the VIA driver)
The VIA driver has changed the default for the DMA_LENGTH_DEF parameter.
Together with adaptive interrupt supression and NAPI support, this
improves performance quite a bit

Signed-off-by: Simon Kagstrom <simon.kagstrom@netinsight.net>
Signed-off-by: David S. Miller <davem@davemloft.net>
2009-11-26 15:51:18 -08:00
Simon Kagstrom
dfff7144b1 via-velocity: Implement NAPI support
This patch adds NAPI support for VIA velocity. The new velocity_poll
function also pairs tx/rx handling twice which improves perforamance on
some workloads (e.g., netperf UDP_STREAM) significantly (that part is
from the VIA driver).

Signed-off-by: Simon Kagstrom <simon.kagstrom@netinsight.net>
Signed-off-by: David S. Miller <davem@davemloft.net>
2009-11-26 15:51:15 -08:00
Simon Kagstrom
6dfc4b95b2 via-velocity: Add ethtool interrupt coalescing support
(Partially from the upstream VIA driver). Tweaking the number of
frames-per-interrupt and timer-until-interrupt can reduce the amount of
CPU work quite a lot.

Signed-off-by: Simon Kagstrom <simon.kagstrom@netinsight.net>
Signed-off-by: David S. Miller <davem@davemloft.net>
2009-11-26 15:51:10 -08:00
Simon Kagstrom
da95b2d422 via-velocity: Correct 64-byte alignment for rx buffers
(From the VIA driver). The current code does not guarantee 64-byte
alignment since it simply does

        int add = skb->data & 63;

        skb->data += add;

(via skb_reserve). So for example, if the skb->data address would be
0x10, this would result in 32-byte alignment (0x10 + 0x10).

Correct by adding

        64 - (skb->data & 63)

instead.

Signed-off-by: Simon Kagstrom <simon.kagstrom@netinsight.net>
Signed-off-by: David S. Miller <davem@davemloft.net>
2009-11-26 15:51:06 -08:00
Alexey Dobriyan
350f75960c r8169: move PHY regs tables to .rodata
As side effect, consume less stack.

	-rtl8169_get_mac_version [vmlinux]:	432
	-rtl8169_init_one [vmlinux]:		376
	+rtl8169_init_one [vmlinux]:		136

Signed-off-by: Alexey Dobriyan <adobriyan@gmail.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
2009-11-25 15:54:21 -08:00
Martin Willi
bc74b0c8af xfrm: Add SHA384 and SHA512 HMAC authentication algorithms to XFRM
These algorithms use a truncation of 192/256 bits, as specified
in RFC4868.

Signed-off-by: Martin Willi <martin@strongswan.org>
Acked-by: Herbert Xu <herbert@gondor.apana.org.au>
Signed-off-by: David S. Miller <davem@davemloft.net>
2009-11-25 15:48:44 -08:00
Martin Willi
8f8a088c21 xfrm: Use the user specified truncation length in ESP and AH
Instead of using the hardcoded truncation for authentication
algorithms, use the truncation length specified on xfrm_state.

Signed-off-by: Martin Willi <martin@strongswan.org>
Signed-off-by: David S. Miller <davem@davemloft.net>
2009-11-25 15:48:41 -08:00
Martin Willi
4447bb33f0 xfrm: Store aalg in xfrm_state with a user specified truncation length
Adding a xfrm_state requires an authentication algorithm specified
either as xfrm_algo or as xfrm_algo_auth with a specific truncation
length. For compatibility, both attributes are dumped to userspace,
and we also accept both attributes, but prefer the new syntax.

If no truncation length is specified, or the authentication algorithm
is specified using xfrm_algo, the truncation length from the algorithm
description in the kernel is used.

Signed-off-by: Martin Willi <martin@strongswan.org>
Signed-off-by: David S. Miller <davem@davemloft.net>
2009-11-25 15:48:38 -08:00
Martin Willi
4e242d1616 xfrm: Define new XFRM netlink auth attribute with specified truncation bits
The new XFRMA_ALG_AUTH_TRUNC attribute taking a xfrm_algo_auth as
argument allows the installation of authentication algorithms with
a truncation length specified in userspace, i.e. SHA256 with 128 bit
instead of 96 bit truncation.

Signed-off-by: Martin Willi <martin@strongswan.org>
Signed-off-by: David S. Miller <davem@davemloft.net>
2009-11-25 15:48:37 -08:00
Alexey Dobriyan
a661c4199b net: convert /proc/net/rt_acct to seq_file
Rewrite statistics accumulation to be in terms of structure fields,
not raw u32 additions. Keep them in same order, though.

This is the last user of create_proc_read_entry() in net/,
please NAK all new ones as well as all new ->write_proc, ->read_proc and
create_proc_entry() users. Cc me if there are problems. :-)

Signed-off-by: Alexey Dobriyan <adobriyan@gmail.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
2009-11-25 15:40:35 -08:00
Octavian Purdila
09ad9bc752 net: use net_eq to compare nets
Generated with the following semantic patch

@@
struct net *n1;
struct net *n2;
@@
- n1 == n2
+ net_eq(n1, n2)

@@
struct net *n1;
struct net *n2;
@@
- n1 != n2
+ !net_eq(n1, n2)

applied over {include,net,drivers/net}.

Signed-off-by: Octavian Purdila <opurdila@ixiacom.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
2009-11-25 15:14:13 -08:00
David S. Miller
4ba3eb034f Merge branch 'master' of git://git.kernel.org/pub/scm/linux/kernel/git/linville/wireless-next-2.6 2009-11-24 15:01:29 -08:00
Joe Perches
35700212b4 net/ipv6: Move && and || to end of previous line
Signed-off-by: Joe Perches <joe@perches.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
2009-11-24 14:52:52 -08:00
Ben Hutchings
c459302db6 sfc: Log interrupt and reset type names, not numbers
Define name tables for these enumerations in a similar way as for
loopback.  Move the loopback name table together with them.

Signed-off-by: Ben Hutchings <bhutchings@solarflare.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
2009-11-24 10:59:04 -08:00
Ben Hutchings
f5e7adc3d4 sfc: Combine high-level header files
All files that include ethtool.h, rx.h or tx.h are also including
efx.h, and there is no good reason to separate out the few
declarations they contain.  Therefore fold them into efx.h.

Signed-off-by: Ben Hutchings <bhutchings@solarflare.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
2009-11-24 10:58:59 -08:00
Ben Hutchings
497f5ba323 sfc: Remove redundant efx_xmit() function
Signed-off-by: Ben Hutchings <bhutchings@solarflare.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
2009-11-24 10:58:58 -08:00
Ben Hutchings
9bc183d7f9 sfc: Remove unnecessary casts to struct sk_buff *
At some point these casts were used to remove const qualification, but
they are now unneeded.

Signed-off-by: Ben Hutchings <bhutchings@solarflare.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
2009-11-24 10:58:55 -08:00
Ben Hutchings
eb50c0d67f sfc: Gather link state fields in struct efx_nic into new struct efx_link_state
Signed-off-by: Ben Hutchings <bhutchings@solarflare.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
2009-11-24 10:58:53 -08:00
Ben Hutchings
e775fb93a8 sfc: Move all I2C stuff into struct falcon_board
Signed-off-by: Ben Hutchings <bhutchings@solarflare.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
2009-11-24 10:58:52 -08:00
Ben Hutchings
3759433db2 sfc: Move struct falcon_board into struct falcon_nic_data
Signed-off-by: Ben Hutchings <bhutchings@solarflare.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
2009-11-24 10:58:48 -08:00
Ben Hutchings
5c16a96c4f sfc: Move definition of struct falcon_nic_data into falcon.h
This is preparation for moving Falcon-specific state required by other
Falcon-specific code.

Signed-off-by: Ben Hutchings <bhutchings@solarflare.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
2009-11-24 10:58:44 -08:00
Ben Hutchings
278c0621fb sfc: Make board information explicitly Falcon-specific
Rename struct efx_board to struct falcon_board.

Introduce and use inline function to look up board info from struct
efx_nic, in preparation for moving it.

Move board init and fini calls into NIC probe and remove functions.

Signed-off-by: Ben Hutchings <bhutchings@solarflare.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
2009-11-24 10:58:42 -08:00
Ben Hutchings
981fc1b4b8 sfc: Rename efx_board::init_leds to init_phy and use for SFN4111T
efx_board::init_leds was introduced as a second stage of
initialisation because of the inter-dependency between the board and
PHY.  We want to move board initialisation into NIC probing, which is
too early to use MDIO, so SFN4111T initialisation also needs to be
split.

Signed-off-by: Ben Hutchings <bhutchings@solarflare.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
2009-11-24 10:58:40 -08:00
Ben Hutchings
398468ed1b sfc: Use a single blink implementation
Only some PHYs have firmware support for a LED blink mode, so we
currently blink the others in a timer function.  Since all PHYs have
simple on and off modes, we don't gain anything by using multiple
blink implementations.  Also, since we have a process context there
is no need to use a timer.

Signed-off-by: Ben Hutchings <bhutchings@solarflare.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
2009-11-24 10:58:39 -08:00
Ben Hutchings
dcf477b2d2 sfc: SFT9001: Reset LED configuration correctly after blinking
Signed-off-by: Ben Hutchings <bhutchings@solarflare.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
2009-11-24 10:58:33 -08:00
Ben Hutchings
3eadb7b0ec sfc: Record RX queue number on GRO path
Signed-off-by: Ben Hutchings <bhutchings@solarflare.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
2009-11-24 10:58:33 -08:00
Ben Hutchings
1241e951af sfc: Move assertions and buffer cleanup earlier in efx_rx_packet_lro()
This removes the need to use a label and goto, and makes the two
branches mirror each other more closely.

Signed-off-by: Ben Hutchings <bhutchings@solarflare.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
2009-11-24 10:58:28 -08:00
Ben Hutchings
3139e62827 sfc: Remove ridiculously paranoid assertions
Signed-off-by: Ben Hutchings <bhutchings@solarflare.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
2009-11-24 10:58:24 -08:00
Ben Hutchings
d96d7dc9f1 sfc: Remove redundant gotos from __efx_rx_packet()
This function no longer has any common cleanup code.

Signed-off-by: Ben Hutchings <bhutchings@solarflare.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
2009-11-24 10:58:23 -08:00
Ben Hutchings
9e0c8a5bab sfc: Remove pointless abstraction of memory BAR number (2)
Finish the job by removing the structure member.

Signed-off-by: Ben Hutchings <bhutchings@solarflare.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
2009-11-24 10:58:22 -08:00
John W. Linville
18b6c9a221 ath9k: set ps_default as false
Copied from original one-line patch here:

	http://bugzilla.kernel.org/show_bug.cgi?id=14267#c26

(This is for 2.6.33 and beyond, where the bool was changed to a flag by
"cfg80211: convert bools into flags". -- JWL)

Signed-off-by: John W. Linville <linville@tuxdriver.com>
2009-11-23 17:05:41 -05:00
Michael Buesch
e33761e6f2 ssb: Fix range check in sprom write
The range check in the sprom image parser hex2sprom() is broken.
One sprom word is 4 hex characters.
This fixes the check and also adds much better sanity checks to the code.
We better make sure the image is OK by doing some sanity checks to avoid
bricking the device by accident.

Signed-off-by: Michael Buesch <mb@bu3sch.de>
Cc: stable@kernel.org
Signed-off-by: John W. Linville <linville@tuxdriver.com>
2009-11-23 17:05:41 -05:00
Michael Buesch
3ba6018aa3 ssb: Fix SPROM writing
The SPROM writing routines were broken since we rewrote the suspend
handling on wireless devices, because SPROM writing depended on suspend.

This patch changes it and freezes devices with the driver remove(), probe()
callbacks instead. This also simplifies the whole logics a lot.

Signed-off-by: Michael Buesch <mb@bu3sch.de>
Signed-off-by: John W. Linville <linville@tuxdriver.com>
2009-11-23 17:05:41 -05:00
Jussi Kivilinna
77593ae28c rndis_wlan: disable stall workaround
Stall workaround doesn't work with bcm4320a devices like with bcm4320b.
This workaround actually causes more stalls/device freeze on bcm4320a.
Therefore disable stall workaround by default.

Signed-off-by: Jussi Kivilinna <jussi.kivilinna@mbnet.fi>
Signed-off-by: John W. Linville <linville@tuxdriver.com>
2009-11-23 17:05:40 -05:00
Jussi Kivilinna
c1f8ca1d83 rndis_wlan: fix buffer overflow in rndis_query_oid
rndis_query_oid overwrites *len which stores buffer size to return full size
of received command and then uses *len with memcpy to fill buffer with
command.

Ofcourse memcpy should be done before replacing buffer size.

Signed-off-by: Jussi Kivilinna <jussi.kivilinna@mbnet.fi>
Signed-off-by: John W. Linville <linville@tuxdriver.com>
2009-11-23 17:05:40 -05:00
Jaswinder Singh Rajput
841507f5c1 mac80211: Fix missing kernel-doc notation
Fix the following htmldocs warnings:

  Warning(net/mac80211/sta_info.h:322): No description found for parameter 'drv_unblock_wk'
  Warning(net/mac80211/sta_info.h:322): No description found for parameter 'drv_unblock_wk'

Signed-off-by: Jaswinder Singh Rajput <jaswinderrajput@gmail.com>
Cc: Johannes Berg <johannes@sipsolutions.net>
Cc: John W. Linville <linville@tuxdriver.com>
Cc: Randy Dunlap <randy.dunlap@oracle.com>
Cc: David Miller <davem@davemloft.net>
Signed-off-by: John W. Linville <linville@tuxdriver.com>
2009-11-23 17:05:40 -05:00
Wey-Yi Guy
3681165235 iwlwifi: remove reset led_tpt from iwl_leds_init()
Current blinking rate is calculated based on the difference between
current tx/rx byte counts and priv->led_tpt.

priv->led_tpt should not get reset in iwl_leds_init(), this function can be
called by bring interface "up" or "down", or when uCode sysassert occurred.
resetting the led_tpt parameter will introduce incorrect led blinking behavior.

Signed-off-by: Wey-Yi Guy <wey-yi.w.guy@intel.com>
Signed-off-by: Reinette Chatre <reinette.chatre@intel.com>
Signed-off-by: John W. Linville <linville@tuxdriver.com>
2009-11-23 17:05:38 -05:00
Wey-Yi Guy
2d237f71b0 iwlwifi: change message for cmd queue full error
Change error message for command queue full

Signed-off-by: Wey-Yi Guy <wey-yi.w.guy@intel.com>
Acked-by: Ben Cahill <ben.m.cahill@intel.com>
Signed-off-by: Reinette Chatre <reinette.chatre@intel.com>
Signed-off-by: John W. Linville <linville@tuxdriver.com>
2009-11-23 17:05:37 -05:00