Commit Graph

32205 Commits

Author SHA1 Message Date
Jens Axboe
aadd06e5c5 [PATCH] splice: fix problems with sys_tee()
Several issues noticed/fixed:

- We cannot reliably block in link_pipe() while holding both input and output
  mutexes. So do preparatory checks before locking down both mutexes and doing
  the link.

- The ipipe->nrbufs vs i check was bad, because we could have dropped the
  ipipe lock in-between. This causes us to potentially look at unknown
  buffers if we were racing with someone else reading this pipe.

Signed-off-by: Jens Axboe <axboe@suse.de>
2006-07-10 11:00:01 +02:00
Stephane Eranian
b3cf257623 [PATCH] i386: use thread_info flags for debug regs and IO bitmaps
Use thread info flags to track use of debug registers and IO bitmaps.

 - add TIF_DEBUG to track when debug registers are active
 - add TIF_IO_BITMAP to track when I/O bitmap is used
 - modify __switch_to() to use the new TIF flags

Performance tested on Pentium II, ten runs of LMbench context switch
benchmark (smaller is better:)

	before	after
avg	3.65	3.39
min	3.55	3.33

Signed-off-by: Stephane Eranian <eranian@hpl.hp.com>
Signed-off-by: Chuck Ebbert <76306.1226@compuserve.com>
Acked-by: Andi Kleen <ak@suse.de>
Signed-off-by: Linus Torvalds <torvalds@osdl.org>
2006-07-09 18:47:12 -07:00
Linus Torvalds
09075ef0fd Merge commit master.kernel.org:/pub/scm/linux/kernel/git/davem/net-2.6 of HEAD
* HEAD:
  [AX.25]: Use kzalloc
  [ATM] net/atm/clip.c: fix PROC_FS=n compile
  [PKT_SCHED]: act_api: Fix module leak while flushing actions
  [NET]: Fix IPv4/DECnet routing rule dumping
  [NET] gso: Fix up GSO packets with broken checksums
  [NET] gso: Add skb_is_gso
  [IRDA]: fix drivers/net/irda/ali-ircc.c:ali_ircc_init()
  [ATM]: fix possible recursive locking in skb_migrate()
  [ATM]: Typo in drivers/atm/Kconfig...
  [TG3]: add amd8131 to "write reorder" chipsets
  [NET]: Fix network device interface printk message priority
2006-07-09 15:50:41 -07:00
Linus Torvalds
c87fed1546 Merge branch 'upstream-linus' of master.kernel.org:/pub/scm/linux/kernel/git/jgarzik/netdev-2.6
* 'upstream-linus' of master.kernel.org:/pub/scm/linux/kernel/git/jgarzik/netdev-2.6: (23 commits)
  [PATCH] 8139too deadlock fix
  [netdrvr] 3c59x: snip changelog from source code
  e1000: increase version to 7.1.9-k2
  e1000: add ich8lan device ID's
  e1000: allow user to disable ich8 lock loss workaround
  e1000: integrate ich8 support into driver
  e1000: add ich8lan core functions
  e1000: disable ERT
  e1000: check return value of _get_speed_and_duplex
  e1000: M88 PHY workaround
  e1000: fix adapter led blinking inconsistency
  e1000: disable CRC stripping workaround
  e1000: force register write flushes to circumvent broken platforms
  e1000: rework module param code with uninitialized values
  e1000: recycle skb
  e1000: change printk into DPRINTK
  e1000: add smart power down code
  e1000: small performance tweak by removing double code
  e1000: fix CONFIG_PM blocks
  e1000: Make PHY powerup/down a function
  ...
2006-07-09 15:50:06 -07:00
Linus Torvalds
84e74f6b77 Merge branch 'blktrace' of git://brick.kernel.dk/data/git/linux-2.6-block
* 'blktrace' of git://brick.kernel.dk/data/git/linux-2.6-block:
  [PATCH] Only the first two bits in bio->bi_rw and rq->flags match
  [PATCH] blktrace: readahead support
  [PATCH] blktrace: fix barrier vs sync typo
2006-07-09 15:49:36 -07:00
Ralf Baechle
1b30dd359e [AX.25]: Use kzalloc
Replace kzalloc instead of kmalloc + memset.

Signed-off-by: Ralf Baechle <ralf@linux-mips.org>
Signed-off-by: David S. Miller <davem@davemloft.net>
2006-07-09 12:14:22 -07:00
Adrian Bunk
2478173464 [ATM] net/atm/clip.c: fix PROC_FS=n compile
This patch fixes the following compile error with CONFIG_PROC_FS=n by 
reverting commit dcdb02752f:

<--  snip  -->

...
  CC      net/atm/clip.o
net/atm/clip.c: In function ‘atm_clip_init’:
net/atm/clip.c:975: error: ‘atm_proc_root’ undeclared (first use in this function)
net/atm/clip.c:975: error: (Each undeclared identifier is reported only once
net/atm/clip.c:975: error: for each function it appears in.)
net/atm/clip.c:977: error: ‘arp_seq_fops’ undeclared (first use in this function)
make[2]: *** [net/atm/clip.o] Error 1

<--  snip  -->

Signed-off-by: Adrian Bunk <bunk@stusta.de>
Signed-off-by: David S. Miller <davem@davemloft.net>
2006-07-09 12:13:18 -07:00
Thomas Graf
ebbaeab18b [PKT_SCHED]: act_api: Fix module leak while flushing actions
Module reference needs to be given back if message header
construction fails.

Signed-off-by: Thomas Graf <tgraf@suug.ch>
Signed-off-by: David S. Miller <davem@davemloft.net>
2006-07-09 11:36:23 -07:00
Linus Torvalds
953969ddf5 Revert "ACPI: dock driver"
This reverts commit a5e1b94008.

Adrian Bunk points out that it has build errors, and apparently no
maintenance. Throw it out.

Signed-off-by: Linus Torvalds <torvalds@osdl.org>
2006-07-09 08:47:46 -07:00
Linus Torvalds
b862f3b099 i386: improve and correct inline asm memory constraints
Use "+m" rather than a combination of "=m" and "m" for improved clarity
and consistency.

This also fixes some inlines that incorrectly didn't tell the compiler
that they read the old value at all, potentially causing the compiler to
generate bogus code.  It appear that all of those potential bugs were
hidden by the use of extra "volatile" specifiers on the data structures
in question, though.

Signed-off-by: Linus Torvalds <torvalds@osdl.org>
2006-07-08 15:24:18 -07:00
Linus Torvalds
e2a3d40258 power: improve inline asm memory constraints
Use "+m" rather than a combination of "=m" and "m" for improved
clarity and consistency.

Signed-off-by: Linus Torvalds <torvalds@osdl.org>
2006-07-08 15:00:28 -07:00
Patrick McHardy
26e0fd1ce2 [NET]: Fix IPv4/DECnet routing rule dumping
When more rules are present than fit in a single skb, the remaining
rules are incorrectly skipped.

Signed-off-by: Patrick McHardy <kaber@trash.net>
Signed-off-by: David S. Miller <davem@davemloft.net>
2006-07-08 13:38:55 -07:00
Herbert Xu
a430a43d08 [NET] gso: Fix up GSO packets with broken checksums
Certain subsystems in the stack (e.g., netfilter) can break the partial
checksum on GSO packets.  Until they're fixed, this patch allows this to
work by recomputing the partial checksums through the GSO mechanism.

Once they've all been converted to update the partial checksum instead of
clearing it, this workaround can be removed.

Signed-off-by: Herbert Xu <herbert@gondor.apana.org.au>
Signed-off-by: David S. Miller <davem@davemloft.net>
2006-07-08 13:34:56 -07:00
Herbert Xu
89114afd43 [NET] gso: Add skb_is_gso
This patch adds the wrapper function skb_is_gso which can be used instead
of directly testing skb_shinfo(skb)->gso_size.  This makes things a little
nicer and allows us to change the primary key for indicating whether an skb
is GSO (if we ever want to do that).

Signed-off-by: Herbert Xu <herbert@gondor.apana.org.au>
Signed-off-by: David S. Miller <davem@davemloft.net>
2006-07-08 13:34:32 -07:00
Adrian Bunk
9c6c6795ed [IRDA]: fix drivers/net/irda/ali-ircc.c:ali_ircc_init()
The Coverity checker spotted, that from the changes from commit 
898b1d16f8 the
       if (ret)
               platform_driver_unregister(&ali_ircc_driver);
was dead code.

This patch changes this function to what seems to have been the 
intention.

Signed-off-by: Adrian Bunk <bunk@stusta.de>
Signed-off-by: David S. Miller <davem@davemloft.net>
2006-07-08 13:33:28 -07:00
Arjan van de Ven
1252ecf63f [ATM]: fix possible recursive locking in skb_migrate()
ok this is a real potential deadlock in a way, it takes two locks of 2
skbuffs without doing any kind of lock ordering; I think the following
patch should fix it. Just sort the lock taking order by address of the
skb.. it's not pretty but it's the best this can do in a minimally
invasive way.

Signed-off-by: Arjan van de Ven <arjan@linux.intel.com>
Signed-off-by: Chas Williams <chas@cmf.nrl.navy.mil>
Signed-off-by: David S. Miller <davem@davemloft.net>
2006-07-08 13:30:52 -07:00
Matt LaPlante
00181fc946 [ATM]: Typo in drivers/atm/Kconfig...
From: Matt LaPlante <kernel1@cyberdogtech.com>
Signed-off-by: Charles Williams <chas@cmf.nrl.navy.mil>
Signed-off-by: David S. Miller <davem@davemloft.net>
2006-07-08 13:30:09 -07:00
John W. Linville
c165b00405 [TG3]: add amd8131 to "write reorder" chipsets
Add the AMD 8131 bridge to the list of chipsets that reorder writes.

Signed-off-by: John W. Linville <linville@tuxdriver.com>
Acked-by: Michael Chan <mchan@broadcom.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
2006-07-08 13:28:53 -07:00
Stephen Hemminger
5a8da02ba5 [NET]: Fix network device interface printk message priority
The printk's in the network device interface code should all be tagged
with severity.

Signed-off-by: Stephen Hemminger <shemminger@osdl.org>
Signed-off-by: David S. Miller <davem@davemloft.net>
2006-07-07 16:54:05 -07:00
Dave Jones
a496e25dfb [PATCH] Fix cpufreq vs hotplug lockdep recursion.
[ There's some not quite baked bits in cpufreq-git right now
  so sending this on as a patch instead ]

On Thu, 2006-07-06 at 07:58 -0700, Tom London wrote:

> After installing .2356 I get this each time I boot:
> =======================================================
> [ INFO: possible circular locking dependency detected ]
> -------------------------------------------------------
> S06cpuspeed/1620 is trying to acquire lock:
>  (dbs_mutex){--..}, at: [<c060d6bb>] mutex_lock+0x21/0x24
>
> but task is already holding lock:
>  (cpucontrol){--..}, at: [<c060d6bb>] mutex_lock+0x21/0x24
>
> which lock already depends on the new lock.
>

make sure the cpu hotplug recursive mutex (yuck) is taken early in the
cpufreq codepaths to avoid a AB-BA deadlock.

Signed-off-by: Arjan van de Ven <arjan@linux.intel.com>
Signed-off-by: Dave Jones <davej@redhat.com>
Signed-off-by: Linus Torvalds <torvalds@osdl.org>
2006-07-07 09:46:45 -07:00
Jeff Garzik
70f05366b7 Merge branch 'master' into upstream 2006-07-06 13:07:32 -04:00
Jens Axboe
1959d21232 [PATCH] Only the first two bits in bio->bi_rw and rq->flags match
Not three, as assumed. This causes the barrier bit to be needlessly set
for some IO.

Signed-off-by: Jens Axboe <axboe@suse.de>
2006-07-06 10:18:05 +02:00
Nathan Scott
40359ccb83 [PATCH] blktrace: readahead support
Provide the needed kernel support for distinguishing readahead
from regular read requests when tracing block devices.

Signed-off-by: Nathan Scott <nathans@sgi.com>
Signed-off-by: Jens Axboe <axboe@suse.de>
2006-07-06 10:03:28 +02:00
Nathan Scott
fc0a75ce48 [PATCH] blktrace: fix barrier vs sync typo
Signed-off-by: Nathan Scott <nathans@sgi.com>
Signed-off-by: Jens Axboe <axboe@suse.de>
2006-07-06 09:56:30 +02:00
Linus Torvalds
120bda20c6 Linux 2.6.18-rc1
It's all good.
2006-07-05 21:09:49 -07:00
Linus Torvalds
075d6adf90 Merge master.kernel.org:/pub/scm/linux/kernel/git/davem/net-2.6
* master.kernel.org:/pub/scm/linux/kernel/git/davem/net-2.6:
  [PKT_SCHED]: Fix error handling while dumping actions
  [PKT_SCHED]: Return ENOENT if action module is unavailable
  [PKT_SCHED]: Fix illegal memory dereferences when dumping actions
2006-07-05 21:08:43 -07:00
Linus Torvalds
e2a305ecb5 Merge master.kernel.org:/pub/scm/linux/kernel/git/davem/sparc-2.6
* master.kernel.org:/pub/scm/linux/kernel/git/davem/sparc-2.6:
  [SPARC64]: Fix stack overflow checking in modular non-SMP kernels.
  [SPARC64]: Fix sparc64 build errors when CONFIG_PCI=n.
2006-07-05 21:08:35 -07:00
Thomas Graf
4fe683f50d [PKT_SCHED]: Fix error handling while dumping actions
"return -err" and blindly inheriting the error code in the netlink
failure exception handler causes errors codes to be returned as
positive value therefore making them being ignored by the caller.

May lead to sending out incomplete netlink messages.

Signed-off-by: Thomas Graf <tgraf@suug.ch>
Signed-off-by: David S. Miller <davem@davemloft.net>
2006-07-05 20:47:28 -07:00
Thomas Graf
d152b4e1e9 [PKT_SCHED]: Return ENOENT if action module is unavailable
Signed-off-by: Thomas Graf <tgraf@suug.ch>
Signed-off-by: David S. Miller <davem@davemloft.net>
2006-07-05 20:45:57 -07:00
Thomas Graf
26dab8930b [PKT_SCHED]: Fix illegal memory dereferences when dumping actions
The TCA_ACT_KIND attribute is used without checking its
availability when dumping actions therefore leading to a
value of 0x4 being dereferenced.

The use of strcmp() in tc_lookup_action_n() isn't safe
when fed with string from an attribute without enforcing
proper NUL termination.

Both bugs can be triggered with malformed netlink message
and don't require any privileges.

Signed-off-by: Thomas Graf <tgraf@suug.ch>
Signed-off-by: David S. Miller <davem@davemloft.net>
2006-07-05 20:45:06 -07:00
Mikael Pettersson
37e64e5ae1 [SPARC64]: Fix stack overflow checking in modular non-SMP kernels.
The sparc64 kernel's EXPORT_SYMBOL(_mcount) is inside an
#ifdef CONFIG_SMP. This breaks modules in non-SMP kernels
built with stack overflow checking (CONFIG_STACK_DEBUG=y),
as modules_install reports:

WARNING: /lib/modules/2.6.17/kernel/drivers/ide/ide-cd.ko needs unknown symbol _mcount

Trivially fixed by moving EXPORT_SYMBOL(_mcount) outside of
the #ifdef CONFIG_SMP.

Signed-off-by: Mikael Pettersson <mikpe@it.uu.se>
Signed-off-by: David S. Miller <davem@davemloft.net>
2006-07-05 20:42:58 -07:00
Linus Torvalds
66337dab95 Merge branch 'upstream-linus' of master.kernel.org:/pub/scm/linux/kernel/git/jgarzik/libata-dev
* 'upstream-linus' of master.kernel.org:/pub/scm/linux/kernel/git/jgarzik/libata-dev:
  [PCI] Add JMicron PCI ID constants
  [PATCH] ahci: Ensure that we don't grab both functions
  [PATCH] libata-core.c: restore configuration boot messages in ata_dev_configure(), v2
  [PATCH] sata_sil24: add suspend/sleep support
  [PATCH] sata_sil24: separate out sil24_init_controller()
  [PATCH] sata_sil: add suspend/sleep support
  [PATCH] sata_sil: separate out sil_init_controller()
  [PATCH] libata: reimplement controller-wide PM
  [PATCH] libata: reimplement per-dev PM
  [PATCH] libata: implement PM EH actions
  [PATCH] libata: separate out __ata_ehi_hotplugged()
  [PATCH] libata: implement ATA_EHI_NO_AUTOPSY and QUIET
  [PATCH] libata: clean up debounce parameters and improve parameter selection
  [PATCH] libata: implement ATA_EHI_RESUME_LINK
  [PATCH] libata: replace ap_lock w/ ap->lock in ata_scsi_error()
  [PATCH] libata: fix ehc->i.action setting in ata_eh_autopsy()
  [PATCH] libata: add ap->pflags and move core dynamic flags to it
  [PATCH] libata: Conditionally set host->max_cmd_len
  [PATCH] sata_vsc: data_xfer should use mmio
2006-07-05 20:19:30 -07:00
Randy Dunlap
7233589d77 [SPARC64]: Fix sparc64 build errors when CONFIG_PCI=n.
Signed-off-by: Randy Dunlap <rdunlap@xenotime.net>
Signed-off-by: David S. Miller <davem@davemloft.net>
2006-07-05 20:18:39 -07:00
Jeff Garzik
309bade002 [PCI] Add JMicron PCI ID constants
They will be used in several IDE/libata files.

Signed-off-by: Jeff Garzik <jeff@garzik.org>
2006-07-05 23:02:48 -04:00
root
9545b5781c [PATCH] ahci: Ensure that we don't grab both functions
When we force the chip into dual fn mode so we get PATA and AHCI we must
be sure we don't then do anything dumb like try and grab both with the AHCI
driver.

Signed-off-by: Alan Cox <alan@redhat.com>
Signed-off-by: Jeff Garzik <jeff@garzik.org>
2006-07-05 22:58:20 -04:00
Borislav Petkov
5afc81427f [PATCH] libata-core.c: restore configuration boot messages in ata_dev_configure(), v2
This one looks better, IMHO.

This restores the default libata configuration messages printed during booting.

Signed-off-by: <petkov@math.uni-muenster.de>
Signed-off-by: Jeff Garzik <jeff@garzik.org>
2006-07-05 22:17:47 -04:00
Tejun Heo
d2298dca9a [PATCH] sata_sil24: add suspend/sleep support
Add suspend/sleep support.

Signed-off-by: Tejun Heo <htejun@gmail.com>
Signed-off-by: Jeff Garzik <jeff@garzik.org>
2006-07-05 22:16:28 -04:00
Tejun Heo
2a41a6108d [PATCH] sata_sil24: separate out sil24_init_controller()
Separate out controller initialization from sil24_init_one() into
sil24_init_controller().  This will be used by resume.

Signed-off-by: Tejun Heo <htejun@gmail.com>
Signed-off-by: Jeff Garzik <jeff@garzik.org>
2006-07-05 22:16:28 -04:00
Tejun Heo
afb5a7cb84 [PATCH] sata_sil: add suspend/sleep support
Add suspend/sleep support.

Signed-off-by: Tejun Heo <htejun@gmail.com>
Signed-off-by: Jeff Garzik <jeff@garzik.org>
2006-07-05 22:16:28 -04:00
Tejun Heo
3d8ec91352 [PATCH] sata_sil: separate out sil_init_controller()
Separate out controller initialization from sil_init_one() into
sil_init_controller().  This will be used by resume.

Signed-off-by: Tejun Heo <htejun@gmail.com>
Signed-off-by: Jeff Garzik <jeff@garzik.org>
2006-07-05 22:16:28 -04:00
Tejun Heo
500530f652 [PATCH] libata: reimplement controller-wide PM
Reimplement controller-wide PM.  ata_host_set_suspend/resume() are
defined to suspend and resume a host_set.  While suspended, EHs for
all ports in the host_set are pegged using ATA_FLAG_SUSPENDED and
frozen.

Because SCSI device hotplug is done asynchronously against the rest of
libata EH and the same mutex is used when adding new device, suspend
cannot wait for hotplug to complete.  So, if SCSI device hotplug is in
progress, suspend fails with -EBUSY.

In most cases, host_set resume is followed by device resume.  As each
resume operation requires a reset, a single host_set-wide resume
operation may result in multiple resets.  To avoid this, resume waits
upto 1 second giving PM to request resume for devices.

Signed-off-by: Tejun Heo <htejun@gmail.com>
Signed-off-by: Jeff Garzik <jeff@garzik.org>
2006-07-05 22:16:28 -04:00
Tejun Heo
d6f26d1f1f [PATCH] libata: reimplement per-dev PM
Reimplement per-dev PM.  The original implementation directly put the
device into suspended mode and didn't synchronize w/ EH operations
including hotplug.  This patch reimplements ata_scsi_device_suspend()
and ata_scsi_device_resume() such that they request EH to perform the
respective operations.  Both functions synchronize with hotplug such
that it doesn't operate on detached devices.

Suspend waits for completion but resume just issues request and
returns.  This allows parallel wake up of devices and thus speeds up
system resume.

Due to sdev detach synchronization, it's not feasible to separate out
EH requesting from sdev handling; thus, ata_device_suspend/resume()
are removed and everything is implemented in the respective
libata-scsi functions.

Signed-off-by: Tejun Heo <htejun@gmail.com>
Signed-off-by: Jeff Garzik <jeff@garzik.org>
2006-07-05 22:16:28 -04:00
Tejun Heo
02670bf379 [PATCH] libata: implement PM EH actions
Implement two PM per-dev EH actions - ATA_EH_SUSPEND and
ATA_EH_RESUME.  Each action puts the target device into suspended mode
and resumes from it respectively.

Once a device is put to suspended mode, no EH operations other than
RESUME is allowed on the device.  The device will stay suspended till
it gets resumed and thus reset and revalidated.  To implement this, a
new device state helper - ata_dev_ready() - is implemented and used in
EH action implementations to make them operate only on attached &
running devices.

If all possible devices on a port are suspended, reset is skipped too.
This prevents spurious events including hotplug events from disrupting
suspended devices.

Signed-off-by: Tejun Heo <htejun@gmail.com>
Signed-off-by: Jeff Garzik <jeff@garzik.org>
2006-07-05 22:16:28 -04:00
Tejun Heo
c0b6c0377c [PATCH] libata: separate out __ata_ehi_hotplugged()
Separate out __ata_ehi_hotplugged() from ata_ehi_hotplugged().  The
underscored version doesn't set AC_ERR_ATA_BUS.  This will be used for
resume which is a hotplug event but not an ATA bus error.

Signed-off-by: Tejun Heo <htejun@gmail.com>
Signed-off-by: Jeff Garzik <jeff@garzik.org>
2006-07-05 22:16:28 -04:00
Tejun Heo
1cdaf534f8 [PATCH] libata: implement ATA_EHI_NO_AUTOPSY and QUIET
Implement ATA_EHI_NO_AUTOPSY and QUIET.  These used to be implied by
ATA_PFLAG_LOADING, but new power management and PMP support need to
use these separately.  e.g. Suspend/resume operations shouldn't print
full EH messages and resume shouldn't be recorded as an error.

Signed-off-by: Tejun Heo <htejun@gmail.com>
Signed-off-by: Jeff Garzik <jeff@garzik.org>
2006-07-05 22:16:27 -04:00
Tejun Heo
e9c839142d [PATCH] libata: clean up debounce parameters and improve parameter selection
The names of predefined debounce timing parameters didn't exactly
match their usages.  Rename to more generic names and implement param
selection helper sata_ehc_deb_timing() which uses EHI_HOTPLUGGED to
select params.

Combined with the previous EHI_RESUME_LINK differentiation, this makes
parameter selection accurate.  e.g. user scan resumes link but normal
deb param is used instead of hotplug param.

Signed-off-by: Tejun Heo <htejun@gmail.com>
Signed-off-by: Jeff Garzik <jeff@garzik.org>
2006-07-05 22:16:27 -04:00
Tejun Heo
2832430435 [PATCH] libata: implement ATA_EHI_RESUME_LINK
Implement ATA_EHI_RESUME_LINK, which indicates that the link needs to
be resumed.  This used to be implied by ATA_EHI_HOTPLUGGED.  However,
hotplug isn't the only event which requires link resume and separating
this out allows other places to request link resume.  This
differentiation also allows better debounce timing selection.

This patch converts user scan to use ATA_EHI_RESUME_LINK.

Signed-off-by: Tejun Heo <htejun@gmail.com>
Signed-off-by: Jeff Garzik <jeff@garzik.org>
2006-07-05 22:16:27 -04:00
Tejun Heo
e30349d27e [PATCH] libata: replace ap_lock w/ ap->lock in ata_scsi_error()
ap_lock was used because &ap->host_set->lock was too long and used a
lot.  Now that &ap->host_set->lock is replaced with ap->lock, there's
no reason to keep ap_lock.

[ed. note: that's not entirely true.  ap_lock is a local variable,
caching the results of a de-ref.  In theory, if the compiler is smart
enough, this patch is cosmetic.  However, since this is not a fast
path (it is the error path), this patch is nonetheless acceptable,
even though it _may_ introduce a performance regression.]

Signed-off-by: Tejun Heo <htejun@gmail.com>
Signed-off-by: Jeff Garzik <jeff@garzik.org>
2006-07-05 22:05:34 -04:00
Tejun Heo
0662c58b32 [PATCH] libata: fix ehc->i.action setting in ata_eh_autopsy()
ata_eh_autopsy() used to directly assign determined action mask to
ehc->i.action thus overriding actions set by some of nested analyze
functions.  This patch makes ata_eh_autopsy() add action masks just as
it's done in other places.

Signed-off-by: Tejun Heo <htejun@gmail.com>
Signed-off-by: Jeff Garzik <jeff@garzik.org>
2006-07-05 21:51:42 -04:00
Tejun Heo
b51e9e5db0 [PATCH] libata: add ap->pflags and move core dynamic flags to it
ap->flags is way too clamped.  Separate out core dynamic flags to
ap->pflags.  ATA_FLAG_DISABLED is a dynamic flag but left alone as
it's referenced by a lot of LLDs and it's gonna be removed once all
LLDs are converted to new EH.

Signed-off-by: Tejun Heo <htejun@gmail.com>
Signed-off-by: Jeff Garzik <jeff@garzik.org>
2006-07-05 21:51:42 -04:00