Commit Graph

35689 Commits

Author SHA1 Message Date
Magnus Damm
c0d83745cc [PATCH] i386: mark two more functions as __init
cyrix_identify() should be __init because transmeta_identify() is.
tsc_init() is only called from setup_arch() which is marked as __init.

These two section mismatches have been detected using running modpost on
a vmlinux image compiled with CONFIG_RELOCATABLE=y.

Signed-off-by: Magnus Damm <magnus@valinux.co.jp>
Signed-off-by: Andi Kleen <ak@suse.de>
2006-09-26 10:52:35 +02:00
Magnus Damm
aada06c9b7 [PATCH] i386: clean up topology.c
There is no need to duplicate the topology_init() function.

Signed-off-by: Magnus Damm <magnus@valinux.co.jp>
Signed-off-by: Andi Kleen <ak@suse.de>
2006-09-26 10:52:35 +02:00
Eric W. Biederman
ba4d40bb5c [PATCH] Auto size the per cpu area.
Now for a completely different but trivial approach.
I just boot tested it with 255 CPUS and everything worked.

Currently everything (except module data) we place in
the per cpu area we know about at compile time.  So
instead of allocating a fixed size for the per_cpu area
allocate the number of bytes we need plus a fixed constant
for to be used for modules.

It isn't perfect but it is much less of a pain to
work with than what we are doing now.

AK: fixed warning

Signed-off-by: Eric W. Biederman <ebiederm@xmission.com>
Signed-off-by: Andi Kleen <ak@suse.de>
2006-09-26 10:52:35 +02:00
Rusty Russell
522e93e3fc [PATCH] i386: Descriptor and trap table cleanups.
The implementation comes from Zach's [RFC, PATCH 10/24] i386 Vmi
descriptor changes:

Descriptor and trap table cleanups.  Add cleanly written accessors for
IDT and GDT gates so the subarch may override them.  Note that this
allows the hypervisor to transparently tweak the DPL of the descriptors
as well as the RPL of segments in those descriptors, with no unnecessary
kernel code modification.  It also allows the hypervisor implementation
of the VMI to tweak the gates, allowing for custom exception frames or
extra layers of indirection above the guest fault / IRQ handlers.

Signed-off-by: Zachary Amsden <zach@vmware.com>
Signed-off-by: Rusty Russell <rusty@rustcorp.com.au>
Signed-off-by: Andi Kleen <ak@suse.de>
2006-09-26 10:52:35 +02:00
Andi Kleen
02ba1a32db [PATCH] i386: move kernel_thread_helper into entry.S
And add proper CFI annotation to it which was previously
impossible. This prevents "stuck" messages by the dwarf2 unwinder
when reaching the top of a kernel stack.

Includes feedback from Jan Beulich

Cc: jbeulich@novell.com
Signed-off-by: Andi Kleen <ak@suse.de>
2006-09-26 10:52:35 +02:00
Adrian Bunk
3d08a256da [PATCH] i386: Make enable_local_apic static
enable_local_apic can now become static.

Cc: len.brown@intel.com

Signed-off-by: Adrian Bunk <bunk@stusta.de>
Signed-off-by: Andi Kleen <ak@suse.de>
2006-09-26 10:52:35 +02:00
Adrian Bunk
e8924acb2e [PATCH] i386: Make acpi_force static
acpi_force can become static.

Cc: len.brown@intel.com

Signed-off-by: Adrian Bunk <bunk@stusta.de>
Signed-off-by: Andi Kleen <ak@suse.de>
2006-09-26 10:52:35 +02:00
Andi Kleen
474c256841 [PATCH] i386: make fault notifier unconditional and export it
It's needed for external debuggers and overhead is very small.

Also make the actual notifier chain they use static

Cc: jbeulich@novell.com

Signed-off-by: Andi Kleen <ak@suse.de>
2006-09-26 10:52:35 +02:00
Andi Kleen
273819a2d9 [PATCH] make fault notifier unconditional and export it
It's needed for external debuggers and overhead is very small.

Also make the actual notifier chain they use static

Cc: jbeulich@novell.com

Signed-off-by: Andi Kleen <ak@suse.de>
2006-09-26 10:52:35 +02:00
Andi Kleen
5e4edbb711 [PATCH] i386: Fix warning in mpparse.c
Fix

linux/arch/i386/kernel/mpparse.c: In function #MP_bus_info#:
linux/arch/i386/kernel/mpparse.c:232: warning: comparison is always false due to limited range of data type

Signed-off-by: Andi Kleen <ak@suse.de>
2006-09-26 10:52:35 +02:00
Andi Kleen
2717941c6a [PATCH] Make boot_param_data pure BSS
Since it's all zero.

Actually I think gcc 4+ will do that automatically, but earlier compilers won't
Signed-off-by: Andi Kleen <ak@suse.de>
2006-09-26 10:52:35 +02:00
Andi Kleen
1edf777803 [PATCH] i386/x86-64: Improve Kconfig description of CRASH_DUMP
Improve Kconfig description of CONFIG_CRASH_DUMP. Previously
it was too brief to be useful.

Cc: vgoyal@in.ibm.com
Cc: ebiederm@xmission.com

Signed-off-by: Andi Kleen <ak@suse.de>
2006-09-26 10:52:35 +02:00
Dimitri Sivanich
cbf9b4bb76 [PATCH] X86_64 monotonic_clock goes backwards
I've noticed some erratic behavior while testing the X86_64 version
of monotonic_clock().

While spinning in a loop reading monotonic clock values (pinned to a
single cpu) I noticed that the difference between subsequent values
occasionally went negative (time going backwards).

I found that in the following code:
                this_offset = get_cycles_sync();
                /* FIXME: 1000 or 1000000? */
-->             offset = (this_offset - last_offset)*1000 / cpu_khz;
        }
        return base + offset;

the offset sometimes turns out to be 0, even though
this_offset > last_offset.

+Added fix From: Toyo Abe <toyoa@mvista.com>

The x86_64-mm-monotonic-clock.patch in 2.6.18-rc4-mm2 made a change to
the updating of monotonic_base. It now uses cycles_2_ns().

I suggest that a set_cyc2ns_scale() should be done prior to the setup_irq().
Because cycles_2_ns() can be called from the timer ISR right after the irq0
is enabled.

Signed-off-by: Toyo Abe <toyoa@mvista.com>
Signed-off-by: Dimitri Sivanich <sivanich@sgi.com>
Signed-off-by: Andi Kleen <ak@suse.de>
2006-09-26 10:52:34 +02:00
Prasanna S.P
d28c4393a7 [PATCH] x86: error_code is not safe for kprobes
This patch moves the entry.S:error_entry to .kprobes.text section,
since code marked unsafe for kprobes jumps directly to entry.S::error_entry,
that must be marked unsafe as well.
This patch also moves all the ".previous.text" asm directives to ".previous"
for kprobes section.

AK: Following a similar i386 patch from Chuck Ebbert
AK: Also merged Jeremy's fix in.

+From: Jeremy Fitzhardinge <jeremy@goop.org>

KPROBE_ENTRY does a .section .kprobes.text, and expects its users to
do a .previous at the end of the function.

Unfortunately, if any code within the function switches sections, for
example .fixup, then the .previous ends up putting all subsequent code
into .fixup.  Worse, any subsequent .fixup code gets intermingled with
the code its supposed to be fixing (which is also in .fixup).  It's
surprising this didn't cause more havok.

The fix is to use .pushsection/.popsection, so this stuff nests
properly.  A further cleanup would be to get rid of all
.section/.previous pairs, since they're inherently fragile.

+From: Chuck Ebbert <76306.1226@compuserve.com>

Because code marked unsafe for kprobes jumps directly to
entry.S::error_code, that must be marked unsafe as well.
The easiest way to do that is to move the page fault entry
point to just before error_code and let it inherit the same
section.

Also moved all the ".previous" asm directives for kprobes
sections to column 1 and removed ".text" from them.

Signed-off-by: Chuck Ebbert <76306.1226@compuserve.com>
Signed-off-by: Andi Kleen <ak@suse.de>
2006-09-26 10:52:34 +02:00
Dave Jones
3ca113ea74 [PATCH] i386: don't taint UP K7's running SMP kernels.
We have a test that looks for invalid pairings of certain athlon/durons
that weren't designed for SMP, and taint accordingly (with 'S') if we find
such a configuration.  However, this test shouldn't fire if there's only
a single CPU present. It's perfectly valid for an SMP kernel to boot on UP
hardware for example.

AK: changed to num_possible_cpus()

Signed-off-by: Dave Jones <davej@redhat.com>
Signed-off-by: Andi Kleen <ak@suse.de>
2006-09-26 10:52:34 +02:00
Jeremy Fitzhardinge
5758d5dfef [PATCH] i386: fix dubious segment register clear in cpu_init()
Fix a very dubious piece of code in
arch/i386/kernel/cpu/common.c:cpu_init().  This clears out %fs and
%gs, but clobbers %eax in the process without telling gcc.  It turns
out that gcc happens to be not using %eax at that point anyway so it
doesn't matter much, but it looks like a bomb waiting to go off.

This does end up saving an instruction, because gcc wants %eax==0 for
the set_debugreg()s below.

Signed-off-by: Jeremy Fitzhardinge <jeremy@goop.org>
Signed-off-by: Andi Kleen <ak@suse.de>
2006-09-26 10:52:34 +02:00
Andi Kleen
3b8d1fe0f2 [PATCH] Don't force frame pointers for lockdep
Now that stacktrace supports dwarf2 don't force frame pointers for lockdep anymore

Cc: mingo@elte.hu
Signed-off-by: Andi Kleen <ak@suse.de>
2006-09-26 10:52:34 +02:00
Andi Kleen
a32cf3975b [PATCH] i386: Get ebp from unwinder state when continuing fallback backtrace
Cc: jbeulich@novell.com
Signed-off-by: Andi Kleen <ak@suse.de>
2006-09-26 10:52:34 +02:00
Andi Kleen
950fee8455 [PATCH] i386: Terminate backtrace fallback early if unwinder stack pointer is zero
Cc: jbeulich@novell.com
Signed-off-by: Andi Kleen <ak@suse.de>
2006-09-26 10:52:34 +02:00
Andi Kleen
2b14a78cd0 [PATCH] i386: Do stacktracer conversion too
Following x86-64 patches. Reuses code from them in fact.

Convert the standard backtracer to do all output using
callbacks.   Use the x86-64 stack tracer implementation
that uses these callbacks to implement the stacktrace interface.

This allows to use the new dwarf2 unwinder for stacktrace
and get better backtraces.

Cc: mingo@elte.hu

Signed-off-by: Andi Kleen <ak@suse.de>
2006-09-26 10:52:34 +02:00
Andi Kleen
be7a91709b [PATCH] Check for end of stack trace before falling back
Signed-off-by: Andi Kleen <ak@suse.de>
2006-09-26 10:52:34 +02:00
Andi Kleen
c0b766f13d [PATCH] Merge stacktrace and show_trace
This unifies the standard backtracer and the new stacktrace
in memory backtracer. The standard one is converted to use callbacks
and then reimplement stacktrace using new callbacks.

The main advantage is that stacktrace can now use the new dwarf2 unwinder
and avoid false positives in many cases.

I kept it simple to make sure the standard backtracer stays reliable.

Cc: mingo@elte.hu

Signed-off-by: Andi Kleen <ak@suse.de>
2006-09-26 10:52:34 +02:00
Andi Kleen
c9538ed492 [PATCH] Move unwind_init earlier
Needed for use of the unwinder in lockdep, because lockdep runs really
early too.

Cc: jbeulich@novell.com

Signed-off-by: Andi Kleen <ak@suse.de>
2006-09-26 10:52:34 +02:00
Andi Kleen
b7f5e3c774 [PATCH] Don't access the APIC in safe_smp_processor_id when it is not mapped yet
Lockdep can call the dwarf2 unwinder early, and the dwarf2 code
uses safe_smp_processor_id which tries to access the local APIC page.
But that doesn't work before the APIC code has set up its fixmap.

Check for this case and always return boot cpu then.

Cc: jbeulich@novell.com
Cc: mingo@elte.hu

Signed-off-by: Andi Kleen <ak@suse.de>
2006-09-26 10:52:34 +02:00
Andi Kleen
3fa7c794fe [PATCH] Avoid recursion in lockdep when stack tracer takes locks
The new dwarf2 unwinder needs to take locks to do backtraces
inside modules. This patch makes sure lockdep which calls
stacktrace is not reentered.

Thanks to Ingo for suggesting this simpler approach.

Cc: mingo@elte.hu
Signed-off-by: Andi Kleen <ak@suse.de>
2006-09-26 10:52:34 +02:00
Andi Kleen
5a1b3999d6 [PATCH] x86: Some preparationary cleanup for stack trace
- Remove unused all_contexts parameter
No caller used it
- Move skip argument into the structure (needed for
followon patches)

Cc: mingo@elte.hu

Signed-off-by: Andi Kleen <ak@suse.de>
2006-09-26 10:52:34 +02:00
Muli Ben-Yehuda
4ea8a5d8b5 [PATCH] Calgary IOMMU: eradicate sole remaining 80 chars per line offender
Signed-off-by: Muli Ben-Yehuda <muli@il.ibm.com>
Signed-off-by: Jon Mason <jdmason@us.ibm.com>
Signed-off-by: Andi Kleen <ak@suse.de>
2006-09-26 10:52:33 +02:00
Muli Ben-Yehuda
4ccf4ae314 [PATCH] remove tce_cache_blast_stress()
tce_cache_blast_stress was useful during bringup to stress the IOMMU's
cache flushing. Now that we quiesce DMAs on every cache flush, using
_stress() brings the machine down to its knees once you put it under
load. Remove this debug / bringup code that isn't useful anymore
completely.

Signed-off-by: Muli Ben-Yehuda <muli@il.ibm.com>
Signed-off-by: Jon Mason <jdmason@us.ibm.com>
Signed-off-by: Andi Kleen <ak@suse.de>
2006-09-26 10:52:33 +02:00
Muli Ben-Yehuda
796e4390e0 [PATCH] only verify the allocation bitmap if CONFIG_IOMMU_DEBUG is on
Introduce new function verify_bit_range(). Define two versions, one
for CONFIG_IOMMU_DEBUG enabled and one for disabled. Previously we
were checking that the bitmap was consistent every time we allocated
or freed an entry in the TCE table, which is good for debugging but
incurs an unnecessary penalty on non debug builds.

Signed-off-by: Muli Ben-Yehuda <muli@il.ibm.com>
Signed-off-by: Jon Mason <jdmason@us.ibm.com>
Signed-off-by: Andi Kleen <ak@suse.de>
2006-09-26 10:52:33 +02:00
Muli Ben-Yehuda
de684652f3 [PATCH] print whether CONFIG_IOMMU_DEBUG is enabled
Signed-off-by: Muli Ben-Yehuda <muli@il.ibm.com>
Signed-off-by: Jon Mason <jdmason@us.ibm.com>
Signed-off-by: Andi Kleen <ak@suse.de>
2006-09-26 10:52:33 +02:00
Chuck Ebbert
2ade2920dc [PATCH] i386/x86-64: rename is_at_popf(), add iret to tests and fix
is_at_popf() needs to test for the iret instruction as well as
popf.  So add that test and rename it to is_setting_trap_flag().

Also change max insn length from 16 to 15 to match reality.

LAHF / SAHF can't affect TF, so the comment in x86_64 is removed.

Signed-off-by: Chuck Ebbert <76306.1226@compuserve.com>
Signed-off-by: Andi Kleen <ak@suse.de>
2006-09-26 10:52:33 +02:00
Andi Kleen
91cd444e56 [PATCH] x86: Remove unneeded externs in acpi/boot.c
And move one into proto.h

Cc: len.brown@intel.com
Signed-off-by: Andi Kleen <ak@suse.de>
2006-09-26 10:52:33 +02:00
Fernando Luis Vzquez Cao
2b94ab2fd5 [PATCH] Replace local_save_flags+local_irq_disable with
The combination of "local_save_flags" and "local_irq_disable" seems to be
equivalent to "local_irq_save" (see code snips below). Consequently, replace
occurrences of local_save_flags+local_irq_disable with local_irq_save.

* local_irq_save
#define raw_local_irq_save(flags) \
                do { (flags) = __raw_local_irq_save(); } while (0)

static inline unsigned long __raw_local_irq_save(void)
{
        unsigned long flags = __raw_local_save_flags();

        raw_local_irq_disable();

        return flags;
}

* local_save_flags
#define raw_local_save_flags(flags) \
                do { (flags) = __raw_local_save_flags(); } while (0)

Signed-off-by: Fernando Vazquez <fernando@intellilink.co.jp>
Signed-off-by: Andi Kleen <ak@suse.de>
2006-09-26 10:52:33 +02:00
Andi Kleen
52d522f53f [PATCH] Fix sparse warnings in compat aout code
Signed-off-by: Andi Kleen <ak@suse.de>
2006-09-26 10:52:33 +02:00
Andi Kleen
ddb15ec130 [PATCH] Fix most sparse warnings in sys_ia32.c
Mostly by adding casts.

I didn't touch the "invalid access past ..." which are caused
by the sigset conversion.
Signed-off-by: Andi Kleen <ak@suse.de>
2006-09-26 10:52:33 +02:00
Andi Kleen
dd2994f619 [PATCH] Add sparse annotations to quiet sparse in arch/x86_64/mm/fault.c
Fixes

linux/arch/x86_64/mm/fault.c:125:7: warning: incorrect type in argument 1 (different address spaces)
linux/arch/x86_64/mm/fault.c:125:7:    expected void [noderef] *<noident><asn:1>
linux/arch/x86_64/mm/fault.c:125:7:    got unsigned char *[assigned] instr
linux/arch/x86_64/mm/fault.c:163:8: warning: incorrect type in argument 1 (different address spaces)
linux/arch/x86_64/mm/fault.c:163:8:    expected void [noderef] *<noident><asn:1>
linux/arch/x86_64/mm/fault.c:163:8:    got unsigned char *[assigned] instr
linux/arch/x86_64/mm/fault.c:179:9: warning: incorrect type in argument 1 (different address spaces)
linux/arch/x86_64/mm/fault.c:179:9:    expected void [noderef] *<noident><asn:1>
linux/arch/x86_64/mm/fault.c:179:9:    got unsigned long *<noident>

Signed-off-by: Andi Kleen <ak@suse.de>
2006-09-26 10:52:33 +02:00
Andi Kleen
131cfd7bd5 [PATCH] Add sparse annotation to vsyscall.c
Fixes

linux/arch/x86_64/kernel/vsyscall.c:276:7: warning: constant 0x0f40000000000 is so big it is long
linux/arch/x86_64/kernel/vsyscall.c:80:14: warning: incorrect type in argument 1 (different address spaces)
linux/arch/x86_64/kernel/vsyscall.c:80:14:    expected void const volatile [noderef] *addr<asn:2>
linux/arch/x86_64/kernel/vsyscall.c:80:14:    got void *<noident>
linux/arch/x86_64/kernel/vsyscall.c:200:7: warning: incorrect type in assignment (different address spaces)
linux/arch/x86_64/kernel/vsyscall.c:200:7:    expected unsigned short [usertype] *map1
linux/arch/x86_64/kernel/vsyscall.c:200:7:    got void [noderef] *<asn:2>
linux/arch/x86_64/kernel/vsyscall.c:203:7: warning: incorrect type in assignment (different address spaces)
linux/arch/x86_64/kernel/vsyscall.c:203:7:    expected unsigned short [usertype] *map2
linux/arch/x86_64/kernel/vsyscall.c:203:7:    got void [noderef] *<asn:2>
linux/arch/x86_64/kernel/vsyscall.c:215:10: warning: incorrect type in argument 1 (different address spaces)
linux/arch/x86_64/kernel/vsyscall.c:215:10:    expected void volatile [noderef] *addr<asn:2>
linux/arch/x86_64/kernel/vsyscall.c:215:10:    got unsigned short [usertype] *map2
linux/arch/x86_64/kernel/vsyscall.c:217:10: warning: incorrect type in argument 1 (different address spaces)
linux/arch/x86_64/kernel/vsyscall.c:217:10:    expected void volatile [noderef] *addr<asn:2>
linux/arch/x86_64/kernel/vsyscall.c:217:10:    got unsigned short [usertype] *map1

Signed-off-by: Andi Kleen <ak@suse.de>
2006-09-26 10:52:33 +02:00
Andi Kleen
3bd4d18cba [PATCH] Move e820 map into e820.c
Minor cleanup. Keep setup.c free from unrelated clutter.

Signed-off-by: Andi Kleen <ak@suse.de>
2006-09-26 10:52:33 +02:00
Andi Kleen
c31fbb1ad8 [PATCH] Clean up acpi_numa variable
Move it into srat.c No need to clutter up setup.c for it

And remove use in setup.c completely - it only guarded a printk
which can be done unconditionally.

Signed-off-by: Andi Kleen <ak@suse.de>
2006-09-26 10:52:33 +02:00
Andi Kleen
df3bb57d2c [PATCH] i386/x86-64: Move acpi_disabled variables into acpi/boot.c
Removes code duplication between i386/x86-64.

Not needed anymore in setup.c since early_param cleanup

Cc: len.brown@intel.com
Signed-off-by: Andi Kleen <ak@suse.de>
2006-09-26 10:52:33 +02:00
Andi Kleen
43c85c9c5d [PATCH] Remove need for early lockdep init
I think it was only needed for the printks and we can do them later.

I put in a single early_printk so that we know the kernel is alive
(early_printk doesn't need any locks)

This makes some things easier for initialization of unwind for
lockdep, which is needed by later patches.

cc: mingo@elte.hu

Signed-off-by: Andi Kleen <ak@suse.de>
2006-09-26 10:52:32 +02:00
Andi Kleen
2c8c0e6b8d [PATCH] Convert x86-64 to early param
Instead of hackish manual parsing

Requires earlier i386 patchkit, but also fixes i386 early_printk again.

I removed some obsolete really early parameters which didn't do anything useful.
Also made a few parameters that needed it early (mostly oops printing setup)

Also removed one panic check that wasn't visible without
early console anyways (the early console is now initialized after that
panic)

This cleans up a lot of code.

Signed-off-by: Andi Kleen <ak@suse.de>
2006-09-26 10:52:32 +02:00
Rusty Russell
1a3f239ddf [PATCH] i386: Replace i386 open-coded cmdline parsing with
This patch replaces the open-coded early commandline parsing
throughout the i386 boot code with the generic mechanism (already used
by ppc, powerpc, ia64 and s390).  The code was inconsistent with
whether it deletes the option from the cmdline or not, meaning some of
these will get passed through the environment into init.

This transformation is mainly mechanical, but there are some notable
parts:

1) Grammar: s/linux never set's it up/linux never sets it up/

2) Remove hacked-in earlyprintk= option scanning.  When someone
   actually implements CONFIG_EARLY_PRINTK, then they can use
   early_param().
[AK: actually it is implemented, but I'm adding the early_param it in the next
x86-64 patch]

3) Move declaration of generic_apic_probe() from setup.c into asm/apic.h

4) Various parameters now moved into their appropriate files (thanks Andi).

5) All parse functions which examine arg need to check for NULL,
   except one where it has subtle humor value.

AK: readded acpi_sci handling which was completely dropped
AK: moved some more variables into acpi/boot.c

Cc: len.brown@intel.com

Signed-off-by: Rusty Russell <rusty@rustcorp.com.au>
Signed-off-by: Andi Kleen <ak@suse.de>
2006-09-26 10:52:32 +02:00
Rusty Russell
33df0d19ea [PATCH] Allow early_param and identical __setup to exist
We currently assume that boot parameters which are handled by
early_param() will not overlap boot parameters handled by __setup: if
they do, behaviour is dependent on link order, usually meaning __setup
will not get called.

ACPI wants to use early_param("pci"), and pci uses __setup("pci="), so
we modify the core to let them coexist: "pci=noacpi" will now get
passed to both.

Signed-off-by: Rusty Russell <rusty@rustcorp.com.au>
Signed-off-by: Andi Kleen <ak@suse.de>
2006-09-26 10:52:32 +02:00
Andi Kleen
9ca33eb698 [PATCH] Use early CPU identify before early command line parsing
This makes it possible to modify CPU flags in command line
options without hacks.

And remove another copy in head64.c

Signed-off-by: Andi Kleen <ak@suse.de>
2006-09-26 10:52:32 +02:00
Chuck Ebbert
d4d35854a1 [PATCH] remove lock prefix from is_at_popf() tests
The lock prefix will cause an exception when used with the
popf instruction, so no need to continue searching after it's
found.

Signed-off-by: Chuck Ebbert <76306.1226@compuserve.com>
Signed-off-by: Andi Kleen <ak@suse.de>
2006-09-26 10:52:32 +02:00
Muli Ben-Yehuda
145106e810 [PATCH] remove superflous BUG_ON's in nommu and gart
There's no need to check for invalid DMA data direction in nommu and
gart since we do it in dma-mapping.h anyway before calling the
individual dma-ops.

Signed-off-by: Muli Ben-Yehuda <muli@il.ibm.com>
Signed-off-by: Andi Kleen <ak@suse.de>
2006-09-26 10:52:32 +02:00
Eric W. Biederman
29a6c25bd6 [PATCH] Fix gdt table size in trampoline.S
Allows easier extension of the GDT by using the proper C symbol
for the size in the descriptor.

Signed-off-by: Eric W. Biederman <ebiederm@xmission.com>
Signed-off-by: Andi Kleen <ak@suse.de>
2006-09-26 10:52:32 +02:00
Jan Beulich
8d379dad8f [PATCH] annotate arch/x86_64/lib/*.S
Add unwind annotations to arch/x86_64/lib/*.S, and also use the macros
provided by linux/linkage.h where-ever possible.

Some of the alternative instructions handling needed to be adjusted so
that the replacement code would also have valid unwind information.

Signed-off-by: Jan Beulich <jbeulich@novell.com>
Signed-off-by: Andi Kleen <ak@suse.de>
2006-09-26 10:52:32 +02:00
Andi Kleen
fb2e284856 [PATCH] i386: Clean up spin/rwlocks
- Inline spinlock strings into their inline functions
- Convert macros to typesafe inlines
- Replace some leftover __asm__ __volatile__s with asm volatile

Signed-off-by: Andi Kleen <ak@suse.de>
2006-09-26 10:52:32 +02:00